Sharif Digital Repository

The classical yield criteria do not describe the yield size-dependency that has been observed in micro-scale structures (Fleck, Muller, Ashby, & Hutchinson, 1994; Stolken and Evans 1998; Moreau et al. 2005), and may also significantly underestimate the yield loads of structures at micron and sub-micron scales (Son, Jeong, & Kwon, 2003; Liu et al., 2013). The present paper suggests a specific size-dependent yield criterion based on the strain gradient theory that is aimed at addressing this inadequacy. In order to develop the strain gradient based yield criterion, the deviatoric part of the strain energy is calculated based on this theory and equated to the deviatoric strain energy of a... 

A three-dimensional visco-hyperelastic constitutive model is developed to describe the rate-dependent behavior of rubber-like materials at large deformations. The model encompasses a hyperelastic part which uses the "Exp-Ln" strain energy function to characterize the equilibrium response and a viscous part capturing the rate sensitivity using a hereditary integral form which links the overstress to the history of stored strain energy. A physically consistent rate-dependent relaxation time scheme is introduced which reduces the number of required material parameters and also facilitates the calibration process. The proposed model is verified using various uniaxial experimental data in... 

The elastic behaviors of a two-axes dipole of wedge disclinations and an individual wedge disclination located inside the shell of a free standing core-shell nanowire is studied within the surface/interface elasticity theory. The corresponding boundary value problem is solved using complex potential functions, defined through modeling the disclination dipole by two finite walls of infinitesimal edge dislocations. The stress field, disclination strain energies and image forces acting on the disclinations, are calculated and studied in detail. It is shown that the stresses are rather inhomogeneous across the nanowire cross section, change their signs and reach local maxima and minima far from... 

In this paper, strain gradient thermo-elasticity formulation for axisymmetric Functionally Graded (FG) thick-walled cylinders is presented. For this purpose, the elastic strain energy density function is considered to be a function of gradient of strain tensor in addition to the strain tensor. The material properties are assumed to vary according to a power law in radial direction. Using the constitutive equations and equation of equilibrium in the cylindrical coordinates, a fourth order non-homogenous governing equation for thermo-elastic analysis of thick-walled FG cylinders subjected to thermal and mechanical loadings is obtained and solved numerically. Results show that the intrinsic... 

In non-classical micro-beams, the strain energy of the system is determined by the non-classical continuum mechanics. In this study, we consider a closed-loop control methodology for suppressing the vibration of non-classical microscale Euler-Bernoulli beams with nonlinear electrostatic actuation. The non-dimensional form of the governing nonlinear partial differential equation of the system is introduced and converted into a set of ordinary differential equations using the Galerkin projection method. In addition, we prove the observability of the system and we design a state estimation system using the extended Kalman filter algorithm. The effectiveness and performance of the proposed... 

In this paper, a Strain Energy Function (SEF) is proposed to characterize the hyperelastic behavior of transversely isotropic incompressible fiber-reinforced rubbers. The kinematics of the deformation is based on a strain measure consistent with the physics of the deformation. The SEF consists of an isotropic part and an anisotropic one where a simple form of SEF is used for both parts. In order to investigate the capabilities of the proposed model, two fiber-reinforced rubbers under homogeneous deformations are examined. The predictions of the model show a good agreement with the experimental data for both tensile and shear deformations. Also, torsion of a fiber-reinforced rubbery circular... 

Hyperelastic behavior of isotropic incompressible rubbers are studied to develop a strain energy function. The proposed function includes only three material parameters which are related to physical properties of the material molecular network. Furthermore, the model benefits from well suitting in all ranges of stretch as well as possessing the property of deformation mode independency. This reduces the required number of experimental tests for parameter calibration. Results of the model are compared with results of Mooney-Rivlin, Arruda-Boyce, Gent and Gao models as well as the experimental data  

The development of damage detection techniques for offshore jacket structures is vital to prevent catastrophic events. This paper applies a frequency response based method for the purpose of structural healthCgreater detection efficiency. In addition, the performance of the proposed method was evaluated in relation to multiple damages. The aforementioned points are illustrated using the numerical study of a two dimensional jacket platform, and the results proved to be satisfactory utilizing the proposed methodology  

The elastic behavior of an edge dislocation placed in the shell of a free-standing core-shell nanowire is considered within the theory of surface/interface elasticity. Using the method of complex potential functions the expressions for the stress field of the dislocation, image forces on the dislocation, and the dislocation strain energy are derived and studied in detail. A special attention is paid to non-classical effects revealed within the surface/interface elasticity approach where a characteristic length parameter referred to as surface/interface modulus is introduced. These effects are (i) the stress oscillations along the shell surface and core-shell interface for negative values of... 

The elastic behavior of an edge dislocation located inside the core of a core-shell nanowire which is embedded in an infinite matrix is studied within the surface/interface elasticity theory. The corresponding boundary value problem is solved exactly by using complex potential functions. An important parameter so-called interface characteristic parameter which has the dimension of length and is a combination of the interface moduli enters the formulations. The stress field of the dislocation, image force acting on the dislocation, and the dislocation strain energy is calculated by considering the interface effect. The introduced characteristic parameter allows the examination of the... 

Hyperelastic behavior of isotropic incompressible rubbers is studied to develop a strain energy function which satisfies all the necessary characteristic properties of an efficient hyperelastic model. The proposed strain energy function includes only three material parameters which are somehow related to the physical quantities of the material molecular network. Moreover, the model benefits from mathematical simplicity, well suitting in all ranges of stretch and possessing the property of deformation-mode-independency. This reduces the required number of experimental tests for parameter calibration of the model. Results of the proposed model are compared with results of some available models... 

In this paper, employing the logarithmic (or Hencky) strain as a more physical measure of strain, the time-dependent response of compressible viscoelastic materials is investigated. In this regard, we present a phenomenological finite strain viscoelastic constitutive model, developed within the framework of irreversible thermodynamics with internal variables. The formulation is based on the multiplicative decomposition of the deformation gradient into elastic and viscoelastic parts, together with the use of the isotropic property of the Helmholtz strain energy function. Making use of a logarithmic mapping, we present an appropriate form of the proposed constitutive equations in the... 

In this paper, a new multi-scale approach is presented based on the modified boundary Cauchy-Born (MBCB) technique to model the surface effects of nano-structures. The salient point of the MBCB model is the definition of radial quadrature used in the surface elements which is an indicator of material behavior. The characteristics of quadrature are derived by interpolating data from atoms laid in a circular support around the quadrature, in a least-square scene. The total-Lagrangian formulation is derived for the equivalent continua by employing the Cauchy-Born hypothesis for calculating the strain energy density function of the continua. The numerical results of the proposed method are... 

This paper proposes a new visco-hyperelastic constitutive law for modeling the finite-deformation strain rate-dependent behavior of foams as compressible elastomers. The proposed model is based on a phenomenological Zener model, which consists of a hyperelastic equilibrium spring and a Maxwell element parallel to it. The hyperelastic equilibrium spring describes the steady state response. The Maxwell element, which captures the rate-dependency behavior, consists of a nonlinear viscous damper connected in series to a hyperelastic intermediate spring. The nonlinear damper controls the rate-dependency of the Maxwell element. Some strain energy potential functions are proposed for the two... 

In this paper, tensile strain energy absorption of two different hybrid modified epoxies has been systematically investigated. In one system, epoxy has been modified by amine-terminated butadiene acrylonitrile (ATBN) and hollow glass spheres as fine and coarse modifiers, respectively. The other hybrid epoxy has been modified by the combination of ATBN and recycled Tire particles. The results of fracture toughness measurement of blends revealed synergistic toughening for both hybrid systems in some formulations. However, no evidence of synergism is observed in tensile test of hybrid samples. Scanning electron microscope (SEM), transmission optical microscope (TOM) and finite element (FEM)... 

In this paper, a novel multi-scale approach is developed for modeling of the surface effect in crystalline nano-structures. The technique is based on the Cauchy-Born hypothesis in which the strain energy density of the equivalent continua is calculated by means of inter-atomic potentials. The notion of introducing the surface effect in the finite element method is based on the intrinsic function of quadratures, called as an indicator of material behavior. The information of quadratures is derived by interpolating the data from probable representative atoms in their proximity. The technique is implemented by the definition of reference boundary CB elements, which enable to capture not only...