Sharif Digital Repository

The elastic behaviors of a two-axes dipole of wedge disclinations and an individual wedge disclination located inside the shell of a free standing core-shell nanowire is studied within the surface/interface elasticity theory. The corresponding boundary value problem is solved using complex potential functions, defined through modeling the disclination dipole by two finite walls of infinitesimal edge dislocations. The stress field, disclination strain energies and image forces acting on the disclinations, are calculated and studied in detail. It is shown that the stresses are rather inhomogeneous across the nanowire cross section, change their signs and reach local maxima and minima far from... 

This paper proposes a new visco-hyperelastic constitutive law for modeling the finite-deformation strain rate-dependent behavior of foams as compressible elastomers. The proposed model is based on a phenomenological Zener model, which consists of a hyperelastic equilibrium spring and a Maxwell element parallel to it. The hyperelastic equilibrium spring describes the steady state response. The Maxwell element, which captures the rate-dependency behavior, consists of a nonlinear viscous damper connected in series to a hyperelastic intermediate spring. The nonlinear damper controls the rate-dependency of the Maxwell element. Some strain energy potential functions are proposed for the two... 

Buckling of generally laminated conical shells under uniform torsion with simply-supported boundary conditions is investigated. The Donnel type strain displacement relations are used to obtain potential strain energy of the shell and membrane stability equation is applied to acquire the external work done by torsion. The Ritz method is used to solve the governing equations and critical buckling loads are obtained. The accuracy of the results is validated in comparison of with other investigations and finite element method. The effects of lamination sequence, semi-vertex angle and length to radius ratio of the cone are evaluated and mode shapes are presented for two types of lamination... 

In this paper, strain gradient thermo-elasticity formulation for Functionally Graded (FG) thick-walled cylinders is presented. Elastic strain energy density function is considered to be a function of gradient of strain tensor in addition to the strain tensor. The material properties are assumed to vary according to power law in radial direction. Using the constitutive equations and equation of equilibrium in the cylindrical coordinates, fourth order non-homogenous governing equation for thermo-elastic analysis of thick-walled FG cylinders subjected to thermal and mechanical loadings is obtained and solved numerically. Results show that the intrinsic length parameter affects the stress... 

The elastic behavior of an edge dislocation placed in the shell of a free-standing core-shell nanowire is considered within the theory of surface/interface elasticity. Using the method of complex potential functions the expressions for the stress field of the dislocation, image forces on the dislocation, and the dislocation strain energy are derived and studied in detail. A special attention is paid to non-classical effects revealed within the surface/interface elasticity approach where a characteristic length parameter referred to as surface/interface modulus is introduced. These effects are (i) the stress oscillations along the shell surface and core-shell interface for negative values of... 

Toughening of epoxy with different types of modifiers produces a bimodal blend that might show better fracture resistance in comparison with single-modified ones. In this research, bimodal epoxy formulations including mixtures of glass microsphere and silica nanoparticles are explored for possible synergistic toughening. The influence of composition on the glass transition temperature (Tg), tensile characteristics, and fracture toughness (KIC) is investigated. Interestingly, a synergism in fracture toughness is observed when mixtures of modifiers were incorporated. For the fixed overall modifier content, KIC is higher when the volume fraction of glass microsphere is lesser than the volume... 

In this article, the self-compacting lightweight concretes (SCLC) with different fibers were prepared and exposed to elevated temperatures, and their mechanical properties were investigated. Three types of fibers were steel fibers (SF), polypropylene fibers (PPF), and metal springs with a volume fraction of 0.4%. One hundred and fifty cylindrical specimens were prepared, and the compression, tensile and flexural tests were carried out on them after exposure to high temperatures ranging from 25 to 700°C. The findings indicate that incorporation of steel fibers and springs enhanced the compressive strength of concrete by 20% compared to the control specimen. Meanwhile, the polypropylene fibers... 

In this article, the self-compacting lightweight concretes (SCLC) with different fibers were prepared and exposed to elevated temperatures, and their mechanical properties were investigated. Three types of fibers were steel fibers (SF), polypropylene fibers (PPF), and metal springs with a volume fraction of 0.4%. One hundred and fifty cylindrical specimens were prepared, and the compression, tensile and flexural tests were carried out on them after exposure to high temperatures ranging from 25 to 700°C. The findings indicate that incorporation of steel fibers and springs enhanced the compressive strength of concrete by 20% compared to the control specimen. Meanwhile, the polypropylene fibers... 

In this paper, strain gradient thermo-elasticity formulation for axisymmetric Functionally Graded (FG) thick-walled cylinders is presented. For this purpose, the elastic strain energy density function is considered to be a function of gradient of strain tensor in addition to the strain tensor. The material properties are assumed to vary according to a power law in radial direction. Using the constitutive equations and equation of equilibrium in the cylindrical coordinates, a fourth order non-homogenous governing equation for thermo-elastic analysis of thick-walled FG cylinders subjected to thermal and mechanical loadings is obtained and solved numerically. Results show that the intrinsic... 

The macroscopic constitutive law for a heterogeneous solid containing two dissimilar nonlinear elastic phases undergoing finite deformation is obtained. Attention is restricted to the case of spherical symmetry such that only the materials consisting of an irregular suspension of perfectly spherical particles experiencing all-round uniform loading are considered which leads to a one-dimensional modeling. For the homogenization procedure, a strain-energy based scheme which utilizes Hashin's composite sphere is employed to obtain the macroscopic stress-deformation relation added by the initial volume fraction of the particles. As applications of the procedure, the closed-form macroscopic... 

Delaminated composite beam under general edge loading conditions is studied. Based on a technical engineering theory an analytical procedure for calculation of strain energy release rate and its separation into modes I and II of delamination is presented. By choosing a suitable displacement field based on second-order shear-thickness deformation theory and using the principle of minimum total potential energy, the equations of equilibrium are obtained along with the appropriate boundary conditions. The J integral and its definition for different modes of fracture is used for calculation of strain energy release rate and its separation into different modes. Double cantilever beam (DCB)... 

Chemical processing of two-dimensional (2D) transition metal dichalcogenides has attracted immense attention due to their unique optical, electrical, and catalytic properties. In this paper, we show that under special conditions during seedless chemical vapor deposition (CVD), it is possible to grow large-area 2D WS2 layers with disc-shaped morphology, which has been scarcely reported. Detailed characterizations of the CVD-grown layers by Raman spectroscopy, atomic force microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy have revealed that a gradient in the precursor concentration in the gas phase and strain energy in the deposited hexagonal clusters favor... 

In this paper, a micromechanical study on rate-dependent behavior of connective tissues is performed. To this end, a hyper viscoelastic constitutive model consisting a hyperelastic part for modeling equilibrium response of tissues and a viscous part using a hereditary integral is proposed to capture the time-dependent behavior of the tissues. With regard to the hierarchical structure of the tissue, strain energy function are developed for modeling elastic response of the tissue constituents i.e. collagen fibers and ground matrix. The rate-dependency is incorporated into the model using a viscous element with rate-dependent relaxation time. The proposed constitutive model is implemented into...