Sharif Digital Repository

Synthesis and characterization of metal dithiocarbamate complexes of N 1 ,N 3 -dicinnamylpropane-1,3-diamine, N 1 ,N 4 -dicinnamylbutane-1,4-diamine and N 1 ,N 6 -dicinnamylhexane-1,6-diamine are reported. The ligands are prepared using cinnamaldehyde and primary diamines to provide the corresponding diimines, followed by reduction with NaBH 4 to afford the corresponding secondary diamines. Diamines react with carbon disulfide in basic medium to furnish the corresponding bis(dithiocarbamate) salts, which underwent complexation with metals. The prepared complexes were characterized by IR, 1 H and 13 C NMR, TGA and elemental analyses. Although the dinuclear metal dithiocarbamate macrocyclic... 

Glass-ceramic composites in the SiO2-CaO-MgO-(Na2O) system, reinforced with 5, 10 and 20 wt.% aluminum titanate were synthesized by pressureless sintering. Optimum sintering temperatures with maximum relative density were determined for each composition. The composites were fired above the crystallization peak temperature of glass-ceramic. Mechanical properties of glass-ceramic and sintered composites, such as fracture toughness, flexural strength and Vickers microhardness, were investigated. The sintered composites were characterized by scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS) and X-ray diffraction (XRD). The results showed that the composite containing 10... 

Lead sulfide quantum dots (PbS QDs) were decorated onto a graphene surface in a semi-core-shell structure using supercritical ethanol. The temperature of ethanol played significant role in controlling size and agglomeration of QDs as well as the extent of reduction of graphene. Average size of the QDs was estimated by transmission electron microscopy to be around 3.96 nm and by quantum models to be about 4.34 nm. PbS QDs prepared at 330 °C were of high purity, and the yield was 99%. Instrumental and chemical analyses demonstrated formation of a strong bond between PbS QDs and graphene, through a Pb-O-C bridge. UV and photoluminescence measurements along with theoretical considerations... 

Magnetite nanoparticles with a size distribution of 15-21 nm were synthesized and decorated onto surface of graphene oxide by ultrasound assisted precipitation. Size and size distribution of the obtained M-GO hybrid were appreciably finer than the hybrids prepared by stirring method. M-GO is a superparamagnetic material with saturation magnetization of 31 emu g-1. The Langevin equation was successfully applied for estimation of size of Fe3O4 nanoparticles in M-GO hybrid, with maximum error of 17.5%. The study put forward a formation mechanism for M-GO, based on instrumental analyses. Adsorption isotherms of Sr2+ and Co2+ ions, which were fitted by Langmuir monolayer... 

A novel microspherical adsorbent for the removal of uranium from aqueous solutions was developed by immobilizing of natural bentonite in the polymeric matrix of calcium alginate. Different uptake properties of the prepared microspheres were examined using batch, stirred and column methods. The adsorbent showed high affinity toward uranium ions, especially at pHs above 3. Major uptake mechanisms included ion exchange, chelating of the (UO2)2+ ions to the -OH groups of alginate, and surface complexation with bentonite. Surprisingly, the capacity of microspheres was higher than both its constituents, revealing that a synergetic effect occurs. Adsorption kinetics was controlled by slow chemical... 

The diseases and disorders of the cornea may lead to blindness, and cornea transplantation has been an effective treatment in this regard. However, lack of cornea throughout the world makes this treatment difficult. Therefore, the first goal of the present study is to make a chitosan/gelatin hyaline film with NHS and EDC crosslinkers for transplanting the epithelial cells of the cornea. Two solutions of gelatin and chitosan were mixed homogeneously before crosslinking in ratios of 20/80, 30/70, 40/60, and 50/50 (Gel/Chi). After 24 hours, they were put in an oven to dry, then EDC and NHS were added to the mixture as crosslinker. Corneal epithelial cell morphology was assessed qualitatively... 

In this work, the synthesis and characterization of a new nanocomposite from carbon nanotubes-graft-polymer (CNTs-g-P) is reported. The products were obtained by the filling of multi-walled carbon nanotubes (MWCNTs) (inner diameter 2040 nm) with CoFe2O4 magnetic nanoparticles, been grafted with poly (caprolactone). The filling process was carried out by using acid treatment through wet chemistry. The structure and the properties of the new nanocomposite were studied with TEM, VSM, TGA, and spectroscopic techniques. © 2009 World Scientific Publishing Company  

Graft copolymerization of methyl methacrylate (MMA) was carried out on bagasse fibers in an aqueous medium using eerie ammonium nitrate (CAN) as initiator under a neutral atmosphere. In order to obtain the optimum condition for graft copolymerization, the effects of initiator concentration, temperature, time of reaction, and monomer concentration were studied. The maximum grafting percent was found to be 122%. The bagasse grafted poly(methyl methacrylate) was characterized by FTIR and its thermal behavior was characterized by TGA. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA  

Three new chromophores based on the triphenylamine (MM, DM, DN) with various novel electron withdrawing anchoring groups have been synthesized for use in dye-sensitized solar cells (DSSCs). The sensitizers were characterized by 1H and 13C NMR, Mass, UV–Vis, and electrochemical analysis. The HOMO and LUMO electron distributions of the sensitizers were calculated using density functional theory on a B3LYP level for geometry optimization. The DSSC device based on DM dye showed the best photovoltaic performance among MM and DN dyes: maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 98 %, short circuit current (JSC) of 4.58 mA/cm2, open circuit voltage (VOC) of... 

Magnesium nanopowder has attracted many interests in the recent years, which has a very difficult and costly synthesis process because of its high activity. In this work, magnesium nanoparticles stabilized with amorphous carbon (Mg–C nanoparticles) were synthesized by submerged arc discharge technique in kerosene. The arc discharge was generated between two electrodes of magnesium at the arc current of 1 A and arc voltage of 50 V. Mg–C nanoparticles were characterized by various techniques. Dynamic light scattering result indicated that size of magnesium nanoparticles is about 35 nm. X-ray diffraction showed that the produced sample consisted of hexagonal magnesium and amorphous carbon and... 

Magnesium nanopowder has attracted many interests in the recent years, which has a very difficult and costly synthesis process because of its high activity. In this work, magnesium nanoparticles stabilized with amorphous carbon (Mg–C nanoparticles) were synthesized by submerged arc discharge technique in kerosene. The arc discharge was generated between two electrodes of magnesium at the arc current of 1 A and arc voltage of 50 V. Mg–C nanoparticles were characterized by various techniques. Dynamic light scattering result indicated that size of magnesium nanoparticles is about 35 nm. X-ray diffraction showed that the produced sample consisted of hexagonal magnesium and amorphous carbon and... 

In this study, crumpled-shape nanocomposite of nitrogen and sulfur co-doped ZnO–CeO2 (NSZC) was deposited on FTO substrate using one-step ultrasonic spray pyrolysis. Zinc acetate, cerium nitrate, and thiourea were dissolved in deionized water and used as starting solution. The samples were characterized using FESEM, XRD, UV–vis spectroscopy, EIS, and PL. The as-prepared nitrogen and sulfur co-doped ZnO–CeO2 nanocomposites were evaluated as high photocatalysts for degradation of methyl orange. Nearly 100% photocatalytic degradation of methyl orange was achieved for 180 min. The photoluminescence and electrochemical impedance spectroscopy revealed that co-doping of nitrogen and sulfur could... 

A multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids was chemically modified by sulfonation using chlorosulfonic acid-dimethylformamide (HClSO3-DMF) complex as a reagent. For a structural characterization of salep sulfate 1H nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectra, and Thermogravimetric analysis (TGA) curves were recorded. The sulfate content of modified salep was determined using elemental analysis. This modified biopolymer was used to prepare a new environment-friendly heavy metal ion adsorbent, salep sulfate-graft-polyacrylic acid hydrogel (SS-g-PAA). Swelling rate and equilibrium water absorbency in various... 

In this study, a semi-conductive nanocomposite for electrically controlled drug delivery is introduced. Hydrolyzed collagen known as a naturally abundant polypeptide was modified with polycaprolactone. This modification changed the mechanical properties of the hydrolyzed-collagen. A hydrogel compound was synthesized through radical co-polymerization of acrylic acid on the backbone of this biocompatible polymer in the presence of a crosslinker. The reaction parameters affecting the water absorbency of the hydrogel were optimized using Taguchi method. In situ polymerization of aniline, incorporated conductive nanofiber pathways throughout the hydrogel matrix. 1H NMR, TGA, AFM, SEM, FTIR,... 

Herein, a facile and versatile method for the synthesis of a novel magnetic nanocarrier via surface- initiated reversible addition-fragmentation chain transfer (RAFT) polymerization is introduced. At first, RAFT agent was successfully attached to the surface of Fe 3 O 4 nanoparticles and, then, poly (glycidyl methacrylate) (PGMA) chains were grown and anchored onto the surface of Fe 3 O 4 nanoparticles. At the end, hydrazine (Hy) groups were introduced to the PGMA chains via reaction between epoxy rings and hydrazine molecules. Doxorubicin (DOX) was covalently conjugated to the prepared nanocarrier (Fe 3 O 4 @PGMA@Hy) through a hydrazone linkage. The in vitro drug release of Fe 3 O 4... 

A novel multi stimuli-responsive silica nanocomposite with a core-shell structure is synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. The SiO2 nanoparticles are chemically modified via 3-(trimethoxylsilyl) propyl methacrylate (MPS) which they are used in the core of nanocomposite. The macro-RAFT agent is prepared by RAFT polymerization of N-isopropylacrylamide (NIPAM), spirooxazine acryloyl monomer (SOM), and 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT as a RAFT agent). Finally, the smart nanocomposite is prepared by reaction between the macro-RAFT agent and 2-(Dimethylamino) ethyl methacrylate (DMAEMA) as a monomer. SOM as a... 

A four-step synthetic strategy was applied to achieve novel methacrylic monomers. 5-Norbornene-2,2-dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3-diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, 1H-NMR, and 13C-NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing... 

Molybdenum oxide nanostructures were synthesized utilizing the solution combustion method where the ammonium molybdate powder and an organic additive were used as precursors. Different organic additives including ethylene diamine tetraacetic acid (EDTA), polyethylene glycol 200 (PEG 200), sorbitol and urea were used as surfactants in order to investigate the effect of additive structure on morphology and particle size of products. Also various reaction parameters such as the additive/Mo molar ratio, concentration of metal ion in solution, pH of the reaction, and temperature of the synthesis media were changed to study effects on product morphology and size. Outcomes were characterized by... 

In this study, a new polymeric functionalized magnetic nanocatalyst containing a molybdenum Schiff base complex was prepared using a few consecutive steps. Poly (methylacrylate)-coated magnetic nanoparticles were synthesized via radical polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the amidation of the methyl ester groups with hydrazine. Polymeric functionalization efficiently provides the advantage that more catalytic units can be grafted on the surface of magnetic nanoparticles. The functionalization process was continued with salicylaldehyde which introduced Schiff base groups on to the surface of the polymeric support. In the final step, the desired... 

Abstract: Polyoxometalate-functionalized magnetic nanoparticles (Fe3O4@SiO2–MnPOW) were successfully synthesized via covalent anchoring of Mn(II)-substituted phosphotungstate on ammonium-modified Fe3O4@SiO2 nanoparticles. The complete characterization of nanoparticles has been carried out by scanning electron microscope, energy-dispersive X-ray, X-ray diffraction, Fourier transform infrared and elemental analysis. The resulting nanocomposites were efficient catalysts for the selective oxidation of sulfides with different green oxidants in good to excellent yields and also high selectivity. Leaching and recycling tests showed that the nanocatalyst can be reused several times without...