Sharif Digital Repository

The effect of temperature, pressure and bonding time on microstructure of temperature gradient transient liquid phase (TGTLP) diffusion bonded Al7075 alloy using liquid gallium interlayer was investigated. The selected bonding method relies on using the minimum amount of liquid gallium on faying surfaces, using a very fast heating rate to reach the joining temperature and imposing a temperature gradient across the bond region. The microstructure of the diffusion bonded joints was evaluated by light optical microscopy, scanning electron microscopy and energy dispersive spectroscopy (EDS). Results show that by increasing the temperature, pressure and time of joining, a more uniform... 

In this work, we aim to study the effect of temperature gradients on the combined natural convection-radiation heat transfer problem in participating media. To impose this combined effect, we first solve the radiative transfer equation in an absorbing and emitting media. Then, we suitably add the radiation source terms to the energy equation and solve the fluid flow equations. Literature shows that many incompressible algorithms use the Boussinesq assumption to model the thermobuoyant force; however, the validity of this assumption is limited to cases with low temperature gradient distributions. Evidently, Boussinesq assumption would result in considerable errors in high temperature gradient... 

In this work, we study the gas mixing behavior in a micro T-mixer using the direct simulation Monte Carlo (DSMC) method. The gas mixing process is monitored through a T-mixer, which is fed by two different CO and N2 gases; flowing into the T-mixer through the upper and lower inlets. We investigate the effects of axial and lateral wall temperature gradients on the mixing evolution at different rarefaction levels. The achieved results show that any temperature difference between the channel walls would result in an increase in mixing length for the chosen wall temperature gradient ranges and the studies pressure cases. Our observations show that a positive temperature gradient toward the... 

We study numerically the heat transfer of steady laminar flow in a square cavity filled with electrically conducting fluids, in the presence of an external uniform magnetic field. Imposing a large temperature gradient between two opposite vertical walls, there are substantial temperature and density variations in the domain. The fluid is treated as an ideal gas. Indeed, high temperature gradient thermo-buoyant cavity flows result in natural convection flow domains with high Rayleigh number. To implement the temperature variation effect, the fluid properties, including the conductivity and viscosity coefficients, are considered to vary with temperature in accordance to the Sutherland's law.... 

We use three-dimensional molecular dynamics simulation to investigate the driven flow between two parallel plates separated by argon atoms. Our simulations show that fluids in such channels can be continuously driven. Difference in surface wettability can cause a difference in fluid density along the nano channel. To control the nanochannel temperature walls, we use the thermal wall idea, which models the walls using atoms connected to their original positions by enforcing linear spring forces. In this study, we propose a nanochannel system in which, half of the channel has a low surface wettability, while the other half has a higher surface wettability and that the middle part of channel... 

In this article, an analytical elastic-plastic solution for thick-walled cylinders made of Functionally Graded Materials (FGMs) subjected to internal pressure and thermal loading is presented. Based on the experimental results, a mathematical model to predict the yielding through the thickness of FG AlA359/SiCp cylinder is developed. It is shown that under the temperature gradient loading, there is a point in the cylinder where the circumferential stress changes from compressive to tensile. The position of this point depends on the geometry and material properties of the FG cylinder and is independent of the temperature gradient  

Nonequilibrium molecular dynamics simulations are used to study the motion of a C60 molecule on a graphene sheet subjected to a temperature gradient. The C60 molecule is actuated and moves along the system while it just randomly dances along the perpendicular direction. Increasing the temperature gradient increases the directed velocity of C60. It is found that the free energy decreases as the C60 molecule moves toward the cold end. The driving mechanism based on the temperature gradient suggests the construction of nanoscale graphene-based motors  

Transient liquid phase (TLP) bonding of Al2024-T6 alloy, using gallium (Ga) interlayer, has been investigated. Bonding process was carried out at 470°C for 6 min, and homogenising temperature and time were 495°C and 2 h respectively. Conventional TLP bonding using Ga interlayer was not an appropriate method for joining of Al2024. In this method, the boundary between two Al2024 specimens was not fully eliminated during bonding because of solidification with planar front. In addition, bonding zone was depleted of copper, and as a result, tensile and shear strength of joint decreased to 200 and 110 MPa respectively. TLP bonding under temperature gradient offered very good results in bonding of... 

Abstract Fatigue properties of Al7075-T6 alloy joined by temperature gradient transient liquid phase (TGTLP) diffusion bonding using liquid gallium interlayer was investigated. The fatigue specimen was jointed at 460 °C under 10 MPa pressure for 10 min. The TLP bonded samples were homogenized at 465 °C for 2 h and then T6-heat treated. The fatigue life of Al7075-T6 alloy was determined as 107 cycles under 90 MPa while the fatigue life of TLP bonded sample under this stress amplitude was 1.2×106 cycles, which is about 10% of the total Al7075 alloy fatigue life. The fatigue fracture surfaces of Al7075 sample and TGTLP bonded sample were studied using scanning electron microscope to... 

Field evidence indicates that the thermal and chemical regimes in wellbore considerably affect the wellbore stability. This study presents a general coupled model for transport of solute, solvent and heat including their combined effects on the wellbore stability. Optimization of drilling fluid parameters is crucial for wellbore stability analysis particularly in high pressure-high temperature environments. The coupled effects of chemical potential and temperature gradients on fluid flow significantly change the pore pressure and stress around a borehole. The effects of various parameters such as mud weight, solute concentration gradient, shale properties, and temperature gradient on... 

In this article, experimental and numerical investigations are performed to study a thermogravitational column (TGC) for the separation of toluene/n-heptane mixture. This research has tried to determine the main significant parameters and their effects on the performance of the process. In experimental examinations, the influence of the main parameters such as feed flow rate, cut and temperature gradient on the performance of the TGC efficiency is studied. In addition, computational fluid dynamics is used to simulate the separation process in this review. The response surface methodology (RSM) was also applied to minimize the number of runs and investigate the optimum operating conditions.... 

Temperature gradient on the thick Reactor Pressure Vessel (RPV), caused by sudden overcooling events, especially in the downcomer, would intensify the propagation of structural defects. This situation known as Pressurized Thermal Shock (PTS) could be created in case of Emergency Core Cooling System (ECCS) actuation which leads to injection of cold water into the cold leg of the primary loop in some accidents, e.g. Loss Of Coolant Accident (LOCA). Prediction of Plant response to LOCA and water temperature gradient in the downcomer are performed in thermal-hydraulic section of PTS analysis. Employment of system codes is one of the proposed procedures in literature to obtain plant response and... 

Governing equilibrium equations of thick-walled spherical vessels made of material following linear strain hardening and subjected to a steady-state radial temperature gradient using elasto-plastic analysis are derived. By considering a maximum plastic radius and using the concept of thermal autofrettage for the strengthening mechanism, the optimum wall thickness of the vessel for a given temperature gradient across the wall thickness is obtained. Finally, in the case of thermal loading on a vessel, the effect of convective heat transfer on the optimum thickness is studied and a general formula for the optimum wall thickness and design graphs for several different cases are presented. © 2008... 

In this work, the rising of a single bubble in a quiescent liquid under microgravity condition was simulated. In addition to general studies of microgravity effects, the initiation of hydrodynamic convection, solely due to the variations of interface curvature (surface tension force) and thus the generation of shearing forces at the interfaces, was also studied. Then, the variation of surface tension due to the temperature gradient (Marangoni convection), which can initiate the onset of convection even in the absence of buoyancy, was studied. The related unsteady incompressible full Navier-Stokes equations were solved using a finite difference method with a structured staggered grid. The... 

The sand–bentonite mixture is used as the buffer layer in nuclear waste disposals. The buffer layer, as a non-permeable protective layer, is generally exposed to temperature gradients and the long-term subjection to temperature results in creep and more intact structure for the layer. In the present study, thermally induced structure and its effects on the isotropic compression behavior and volume change behavior of buffer layer are evaluated. Thermal consolidation tests were conducted using a modified triaxial cell capable of handling temperatures up to 90 °C. In order to investigate the effects of thermal gradients on the behavior of the mixture, saturated specimens were cured at constant... 

In the selective laser sintering (SLS) method, layers of powder are scanned by a laser beam and sintered. The thermal gradients created by laser heating and the subsequent cooling of the sintered sections results in thermal stresses and part warping in the final part. Thermal gradients are dependent on the scanning algorithm, in particular, the scan vector length. In this work, an efficient scanning algorithm for the SLS process is presented with the aim to minimise the part warping in the final part due to thermally induced residual stresses, while maintaining the production time at a minimum. The proposed algorithm is implemented in a finite element simulation and scanning parameters... 

Bonding was carried out at 1150 °C for holding times of 60 and 90 min followed by water quenching. At the bonding time of 60 min, Cu remained at the bond region resulting in an unstable liquid/solid interface with a sinusoidal microstructure. Isothermal solidification completed at the holding time of 90 min. Unidirectional solidification was observed from the stainless steel side toward the low carbon manganese steel and abnormal grain growth of stainless steel was seen at the bond region due to temperature gradient which originated from different electrical properties of the parent alloys. Joints made at the bonding time of 90 min were homogenized at 730 °C for 75 min and quenched in water... 

This is the first research on the free vibration analysis of functionally graded graphene platelets reinforced composite (FG-GPLRC) viscoelastic annular plate resting on the visco-Pasternak foundation and subjected to the nonlinear temperature gradient and mechanical loading within the framework of higher-order shear deformation theory (HSDT). Hamilton's principle is employed to establish governing equations within the framework of HSDT. In this paper, viscoelastic properties are modeled according to Kelvin-Voigt viscoelasticity. The deflection as the function of time can be solved by the fourth-order Runge-Kutta numerical method. Generalized differential quadrature method (GDQM) is applied... 

This is the first research on the nonlinear frequency analysis of a multi-scale hybrid nanocomposite (MHC) disk (MHCD) resting on an elastic foundation subjected to nonlinear temperature gradient and mechanical loading is investigated. The matrix material is reinforced with carbon nanotubes (CNTs) or carbon fibers (CF) at the nano- or macroscale, respectively. We present a modified Halpin–Tsai model to predict the effective properties of the MHCD. The displacement–strain of nonlinear vibration of multi-scale laminated disk via third-order shear deformation theory (TSDT) and using Von Karman nonlinear shell theory is obtained. Hamilton’s principle is employed to establish the governing... 

A mathematical model is developed to assess the solidification behaviour of the weld pools. To do so, during gas tungsten arc welding of commercial pure aluminium, equations of conversation of mass, energy and momentum are numerically solved considering three-dimensional steady state heat transfer and fluid flow conditions. The weld pool geometry, weld thermal cycles and various solidification parameters are calculated using temperature and velocity fields acquiring from the utilised model. The solidification behaviour of the weld pool at the weld centreline and the fusion line is then studied using the solidification parameters including temperature gradient G, solidification rate R and the...