Sharif Digital Repository

A novel voltammetric biosensor based on nano-TiO2/nafion/carbon nanoparticles modified glassy carbon electrode (TiO2/N/CNP/GCE) was developed for the determination of dobutamine (DBA). Characterization of the surface morphology and property of TiO2/N/CNP layer was carried out by the scanning electron microscopy and atomic force microscopy. The electrochemical performance of the modified electrode was investigated by means of the cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy techniques. Effective experimental variables, such as the scan rate, pH of the supporting electrolyte, drop size of the casted modifier suspension and accumulation... 

Interfacial studies and band alignment engineering on the electron transport layer (ETL) play a key role for fabrication of high-performance perovskite solar cells (PSCs). Here, an amorphous layer of SnO2 (a-SnO2) between the TiO2 ETL and the perovskite absorber is inserted and the charge transport properties of the device are studied. The double-layer structure of TiO2 compact layer (c-TiO2) and a-SnO2 ETL leads to modification of interface energetics, resulting in improved charge collection and decreased carrier recombination in PSCs. The optimized device based on a-SnO2/c-TiO2 ETL shows a maximum power conversion efficiency (PCE) of 21.4% as compared to 19.33% for c-TiO2 based device.... 

Triboelectric nanogenerators (TENGs) can harvest mechanical energy through coupling triboelectric effect and electrostatic induction. Typically, TENGs consist of organic materials, however on account of the potentially wide range of applications of TENGs as the self-powered portable/wearable electronics, biomedical devices, and sensors; semiconductor metal oxide materials can be promising candidates to be incorporating in TENG structure. Here, flexible TENG based on self-organized TiO2 nanotube arrays (TNTAs) is fabricated via anodization method. The introduced flexible large area nanotubular electrode is employed as the moving electrode in contact with Kapton film in vertical contact... 

Titanium dioxide (TiO2) is an extensively used electron transporting layer (ETL) in n–i–p perovskite solar cells (PSCs). Although, TiO2 ETL experiences the high surface defect together with low electron extraction ability, which causes severe energy loss and poor stability in the PSC. In this study, a new intermediate layer consisting of gold nanoparticles functionalized with fully conjugated fullerene C60 derivative (C60-BCT@Au NPs) that enhances the interfacial contact at ETL/perovskite interface leading to a perovskite film with improved crystallinity and morphology is reported. Moreover, the studies demonstrate that the interface modification of the TiO2 ETL with C60-BCT@Au NPs... 

In this research, we investigate the effect of alkali metal cations including Li, Na and Cs in hydrothermal solution on the morphology, stability, and photoactivity of nanostructured TiO2 nanoflakes as a photoanode. The TiO2 nanoflakes are formed through hydrothermal treatment of Ti foil in 1.0 M LiOH, NaOH or CsOH at 100 °C for 3 h. By subsequent thermal reduction of the structure in an optimized Ar/H2 environment, conductive TiO2 nanoflakes were formed. The reduction treatment remarkably improves the photocurrent density of the TiO2 nanoflakes and has the highest impact on the sample treated in the NaOH alkali solution. For the nanoflakes produced in NaOH alkali solution, the bandgap is... 

To compensate for drag increment due to the addition of nanoparticles to heat-transfer fluids, it seems that one could add drag reducer polymeric agents to these fluids. So, in this work, experiments were carried out for solutions of two types of polyacrylamide (FLOPAAM 3330S and FLOPAAM 3630S) at three distinct concentrations (25, 40, and 55 ppm), and TiO2-water nanofluid at concentrations of 0.015, 0.02, 0.025, and 0.03 L/L. The steady state turbulent convective heat transfer and the friction factor of the suspension of TiO2 in a dilute solution of very high molecular weight, polyacrylamide (hybrid fluid), in a coiled tube were analyzed. Experimental measurements were carried out from a... 

In this work, the combination of H2O2 and an active visible-light-driven photocatalyst (Ag-S/PEG/TiO2) was utilized under natural solar radiation for the degradation of 2-nitrophenol (2-NP), and interaction effects between the photocatalyst and hydrogen peroxide were analyzed. For this purpose, experiments were designed using the response surface methodology based on the central composite design. The resulting data was utilized to obtain a model for the prediction of response (the degradation efficiency) as a function of two independent factors (H2O2 concentration and the photocatalyst loading). The statistical analysis indicated that optimum values of each of the two independent factors... 

Titanium type lithium ion-sieve nanotubes synthesized by the hydrothermal method were extensively explored over recent years due to its promising properties. However, on account of nanotubes′ tangled structure impeding the lithium adsorption in the interior nanotube walls, unalterable dimensions of the synthesized nanotubes, and a long period of annealing, the anodizing technique was proposed. It is shown that lithium uptake and adsorption capacity is improved because of easier mass transfer during the ion exchange process. This work focuses on a novel anodizing method for nanotube ion-sieve synthesis. The optimum anodizing condition was discovered by altering anodizing voltage, time, and... 

Lithium-Sulfur (Li-S) batteries are considered as one of the promising candidates for next-generation Li batteries in near future. Although, these batteries are suffering from certain drawbacks such as rapid capacity fading during the charge and discharge process due to the dissolution of polysulfides. In this paper, Sulfur/metal oxide (TiO2 and SiO2) yolk-shell structures have been successfully synthesized and utilized to overcome this problem and improve the electrochemical performance of sulfur cahtode material. Prepared materials have been characterized using Scanning Electron Microscopy(SEM), Transmission Electron Microscopy(TEM) and X-ray diffraction (XRD) techniques. The results show... 

Eight eco-friendly, and magnetically-separable heterogeneous photocatalysts including five Au nanoparticles (NPs) modified magnetic TiO2@Fe3O4 NPs and three Ag-Au bi-plasmonic NPs-decorated TiO2@Fe3O4 NPs with enhanced photocatalytic performance under visible light were synthesized and used for photodegradation of methyl orange (MO) as a model pollutant in textile wastewater samples. The photocatalytic activity was assessed using two radiation sources namely, an intense linear 532-nm laser and a continuous solar-simulated xenon lamp. Compared to the TiO2 alone, the prepared photocatalysts revealed efficient photocatalytic activity in visible region due to the presence of two localized... 

In this research, anatase TiO2 nano-particles were electrophoretically deposited on the FTO glass. This investigation was focused on the self-cleaning property of TiO2 coatings and the effects of different parameters on this characteristic such as: applied voltages during electrophoretic depositions and durations of UV irradiation. Electrophoretic depositions of suspensions were performed in different voltages of 10, 30 and 60 V (for 10 s) at room temperature. TiO2 coatings were sintered in 450oC for 1 hr. The phase transformation of TiO2 films was considered using XRD. Morphology, average particle size and the thickness of TiO2 films was analyzed using FESEM microscope. The photocatalytic... 

Titanium dioxide is prepared by sol gel method from titanium tetraisopropoxide (TTIP) as precursor and likewise zinc oxide is prepared by sol gel method from zinc acetate dehydrate (ZAD) as precursor. The composite sols are prepared in three different molar ratios 90TiO2:10ZnO, 70TiO2:30ZnO and 50TiO2:50ZnO. Thin film deposition is carried out by dip coating technique. Crystal structure, surface morphology and photocatalytic activity of the prepared nanocomposite thin films are investigated. The antibacterial activity of the prepared nanocomposite thin film against E-coli ATCC 25922 bacteria is examined by placing the thin film in standard aqueous E-coli medium under UV light for 1, 2, 3 and... 

A systematic comparison of single and binary metal oxide T1O2, TiO2-Ga2O3, TiO2-Er 2O3 and TiO2-Ta2O5 gas sensors with nanocrystalline and mesoporous microstructure, prepared by sol-gel route, was conducted. The gas sensitivity was increased by secondary phase introduction into TiO2 film via two mechanisms, firstly through the inhibition of anatase-to-rutile transformation, since the anatase phase accommodates larger amounts of adsorbed oxygen, and secondly through the retardation of grain growth, since the higher surface area provides more active sites for gas molecule adsorption. The binary metal oxides exhibited a remarkable response towards low concentrations of CO and NO2 gases at low... 

In this work, the effect of addition of ZrO2 to TiO2 and catalyst geometry on photocatalytic properties of the nanocomposite TiO2/ZrO2 was investigated. The traditional use of powdery photocatalyst for the degradation of organic compounds has post-treatment problems which means much higher time and costs. A novel method to minimize these problems is immobilization by insertion onto an inert substrate. Several geometries of TiO2–10%ZrO2 (T-10Z) nano-photocatalysts (powder, fiber, film, and network-shaped) were produced using different templates. The products were characterized by X-ray diffraction, field emission scanning electron microscopy, Brunauer–Emmett–Teller, and diffuse reflectance... 

The influence of particle size and surface modification on sonocatalytic activity of TiO2 nanoparticles was investigated by measuring the degradation efficiency of methyl orange (MO) as a model pollutant. Crystalline TiO2 nanoparticles with different particles and aggregate size were prepared through solution-phase method with varying synthesis temperatures. Coating with polyvinyl alcohol was performed to enhance colloidal stability of the particles over a wide range of pH values (1.5–7.5). Characterization was carried out using X-ray diffraction, high-resolution transmission electron microscopy, dynamic light scattering, and Fourier-transformed infrared techniques. It was found that... 

In typical photocatalytic processes slurry reactors are used in which catalyst particles have to be separated from the solution after the process ends which means much higher time and costs. Hence, immobilizing process is carried out on the catalyst to overcome this problem. In this work, fiber and network geometries were produced by particle precipitation on substrates. The obtained structures were characterized by XRD, SEM, and Brunauer–Emmett–Teller analyses. Photocatalytic performance of the samples was investigated by methyl orange degradation and also by hydrogen generation from water/methanol splitting. From the SEM images, the size range of the TiO2 particles in the network... 

In this study, the effect of adding 5–12.5 wt% CuO to TiO2 on photocatalytic properties of the nano-composite TiO2/CuO was investigated. The products were characterized by X-ray diffractometer, SEM, Brunauer–Emmett–Teller (BET), and DRS. BET-specific surface area of the TiO2/CuO composites was lower than that of the pure TiO2. Incorporation of CuO into TiO2 shifted absorption spectra to the visible region. As the CuO content increased from 0 to 12.5%, a clear decrease in optical band gap from 2.95 to 2.30 eV was observed. The photocatalytic performance was determined by methyl orange degradation and cyanide photo-oxidation under ultraviolet irradiation. However, the excessive incorporation... 

The nanofibers prepared by electrospinning process have high potential for the removal of toxic matters from wastewaters. In the present study, the titanium dioxide and titanium dioxide/zinc oxide (TiO2/ZnO) nanofibers prepared by electrospinning technique were coated on the sewage sludge carbon (SSC) surface for adsorption of Ni(II), Cu(II), and COD from aqueous solutions and industrial wastewaters of Iran. The synthesized adsorbents were characterized using XRD, SEM and EDX analysis. The effect of adsorbent type, pH, adsorbent dosage, contact time and initial concentrations of Ni(II), Cu(II) and COD on the adsorption capacity of synthesized SSC/TiO2 and SSC/TiO2/ZnO nanofibrous adsorbents... 

Herein, we report the impact of light scattering mechanism on photovoltaic and photoelectrochemical performance of dye-sensitized solar cell (DSC) devices composed of TiO2 nanoparticles and hollow cubes. DSCs are designed by two different light scattering modes (i.e., mode I in form of single layer electrode containing nanoparticles and hollow cubes and mode II in the form of double layer electrode comprising active and scattering layers made of nanoparticles and mixtures of nanoparticles and hollow cubes, respectively). The synthesized anatase-TiO2 hollow cubes (200–400 nm) and nanoparticles (15–30 nm) are employed to enhance the optical length and light harvesting of photoanodes,... 

Incorporating titanium dioxide (TiO2) nanoparticles into the polymeric matrix offers an opportunity to obtain nanocomposites with improved functionality. In this study, the commercial TiO2 nanoparticles (TNP) were surface treated by different concentrations of aminopropyl triethoxy silane (APTS) as a coupling agent and triethylamine (Et3N) as a surface grafting catalyst by an aqueous process to prepare a nanocomposite with superior properties. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were performed to confirm the successful surface modification of TNP. The prepared modified TiO2 nanoparticles (mTNP) with different weight fractions were used as...