Sharif Digital Repository

Dense underflows are continuous currents that move down-slope due to their density being heavier than that of the ambient water. This difference between the dense fluid and environment fluid can be due to temperature difference, chemical materials, solved materials or suspend solid particles. In these currents, the effect of buoyancy force is produced by this difference density. In this research, many experiments performed in different flow rates, slopes and concentrations to understand the current structure and turbulence specification of the salt solution density currents and particle-laden density currents. Acoustic Doppler Velocimeter is used to measure the velocity fluctuations. The... 

Entrance of air to close water conduits occurs in many ways. This phenomenon makes displeasing effects on water transport structures. Two-phase flows in closed conduits are studied experimentally, numerically and theoretically. Even after decades, due to the complexity of the subject, these studies still require development and reformation. Numerical and theoretical two-phase models are often limited to a special regime of flow."Volume Of Fluid"(VOF) is a model for non-mixing two-phase flows. "Fluent" software uses this model in this field of flows. Volume of fluid is used successfully in some problems like dam break or rising bubbles. Main disadvantage of this model is distribution of the... 

In the present study a through comparison has been made between different free surface modeling methods. Methods for improving the current schemes are analyzed and studied. Among different proposed methods and based on the current in-house CFD solver’s limitations and capabilities, the Flux-Blending Strategy has been used for interface capturing in the framework of the Finite Volume Method (FVM). The proposed scheme has been coupled with other algorithms for improving the capabilities and functionality of the general computational fluid dynamic software, NUMELS, in order to simulate fluid flows with sharp interface.
The improved interface capturing scheme uses the continuous switching... 

Airlift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of the liquid column. Gas-liquid two-phase flow being the main part of the flow through these systems, flowing in vertical pipes of airlift pumps has different regimes namely bubbly, slug, churn and annular. Generally these regimes appear starting from bubbly to annular from bottom to top of the upriser pipe. Gas/liquid multiphase flows occur in a wide range of natural and man-made situations such as boiling heat transfer, cloud cavitation, bubble columns and reactors in the chemical industry, cooling circuits of power plants, spraying of liquid fuel and paint, emulsions, rain, bubbles... 

In this research, droplet motion in symmetric and asymmetric junctions in micro and nano scales was investigated. Droplets motion in symmetric and asymmetric junctions have many applications in many industries such as chemical and pharmacy. In this research symmetric T-junction in micro and nano sizes was simulated numerically in 2D and 3D formes. Also asymmetric T-junction (with unequal width branches) was simulated numerically in two cases, 2D and 3D. In the asymmetric T-junction, also an analyrical theory was developed. Numerical simulation was performed by using VOF techniqe and analytical theory was developed by thin film theory. For verifying the accuracy of numerical solution, grid... 

Mesoscopic hydrodynamic equations are solved employing a VOF based method to investigate the equilibrium shape of nanodroplets positioned over various topographic geometries of the supporting substrate for three-dimensional systems. By taking into account liquid-liquid and liquid-solid interactions a complex distribution for inter-molecular forces over the substrates (the disjoining pressure) is observed. In this research we show that motion of nanodroplets not only caused by contact angle difference in drplets two sides, but also depend on disjoining pressure parameters.Geometries with increasing complexities, from wedges to three dimensional edges and wedges, were explored with the main... 

Drop formation from the tip of a nozzle and its motion in bulk fluid is an interesting and practical process which has widely turned researchers’ attention. Investigation into the governing physics and effective parameters on formation, deformation and motion of a drop increases the efficiency of the related industrial processes. Thus in the present study, in order to simulate this process, full Navier-Stokes equations solved by the Volume of Fluid (VOF) method in an axisymmetric domain using Fluent software as the solver. In this research, the effects of Weber number (the proportion of inertial force to surface tension force) and Ohnesorge number (which refers to the proportion of viscous... 

Drop penetration into the capillary tube, as a classical problem, has been studied over 100 years. But there are a few studies that investigate forced impregnation of capillary tubes, which has major application in coating, inkjet printing and rain drop penetration into the soil, have been made. A comprehensive numerical investigation on millimeter droplet impact dynamics on a thick capillary tube with micrometer sized pore is conducted and validated against experimental data. This work is extended to oblique impact of drops into pores and normal impact on nanoscaled pores. We apply the finite volume numerical method to solve the time-dependent governing equations of continuity, momentum in... 

In the present work, the deformation and collapse of a single cavitating bubble near solid boundaries is simulated by solving the preconditioned, homogenous, multiphaseNavier-Stokes equations. Up to now, all studies in the literature performed by the volume of fluid (VOF)approach to capture the bubble surface have been based on the pressure-based category in which the flow variables are calculated through solving the Poisson equation. Here, the density-based category is applied and the solution methodology is based on the artificial compressibility approach. The compressible form of the Navier-Stokes equations is applied inside the bubble and the liquid phase is assumed to be incompressible.... 

A bioreactor can refer to any device or system constructed on engineering basis and has an active biological medium. This medium includes aerobic and non-aerobic reactions in which organisms and the theire produced substances have the main role. One of the applications of bioreactors is to provide an appropriate medium for animal and plant cell culture and growth. Nowadays many biological processes in high volume scales are carried out in stirred tank bioreactors. In these bioreactors oxygen transfer is usually increased by increasing turbulence which is necessary for mixing nutrients and keeping the homogeneity of the medium. However, there are some limitations for increasing the stirring... 

In this investigation Magneto Mercury Reciprocating Micrpump (MMRM) the combination of Magneto-Hydrodynamic and Reciprocating micropumps has been analyzed. To achieve the analytical and numerical solution of one-tank and three-tank MMRM, the momentum, continuity, volume fraction and magnetohydrodynamic equations have been presented. The dimensionless analytical solution of one-phase and two-phase three dimensional MHD flow in the condition of using constant current and potential electrical source, has been offered.
The boundary between mercury and air has been tracked via VOF method in OpenFOAM software. VOF equation has been solved by explicit method with variable time step and maximum... 

Mass transfer of a drop moving in a bulk fluid is an interesting subject which has attracted a lot of attention. Understanding effective parameters in this process would be helpful in order to increase the efficiency of the industrial processes related to mass transfer. In this research, the deformation and mas transfer of a moving drop was studied numerically. Navier-Stokes equations and concentration equation were solved separately with a VOF method in an axisymmetric domain using Fluent software. Comparision between numerical results and former experimental results proves the accuracy of the modelling in both fields of deformation and mass transfer. Moreover, effects of the physical... 

In this work, the cone-jet mode of electrospray is simulated by a two phase solver in OpenFoam software. For this aim firstly, breakup of a liquid jet is examined without applying any electric potential to the injecting capillary and results are compared with other works to evaluate the two phase solver. Next with applying electric potential, the whole evolution of cone-jet in time is simulated. One of the most important issues in this mode is the minimum potential that needs to form a stable cone-jet in different flow rates. These minimum voltages are obtained in various flow rates and compared with other experimental and computational works. Result shows that with increasing flow rate the... 

The stirred tank is one of the oldest device that widely used in different industrial. a special kind of stirred tank that clled bioreactor refer to any device which supplies required biological, biochemical and biomechanical engineered product. Since the aim of bioreactor is produce of desired biological product, it is essential to accurate monitoring internal and external transfer of nutrient, heat transfer, fluid velocity, Strain stress and medium PH. good design and application of bioreactor depend on product, organism, conditions for produce desired product and scale of produce. also cost of capital and function cost are important in bioreactor design. one of the most important... 

Continuous separation processes in microfluidic devices experienced a steep rise in attention during the last two decades. Among the different separation processes, liquid-liquid extraction especially benefits from the short molecular diffusion distance and large specific interfacial area, as these are advantageous for effective mass transport. In the present study, glass-based microfluidic devices have been fabricated utilizing laser ablation and wet chemical etching methods then experiments and numerical simulation were carried out to investigate hydrodynamic behavior of fluid flow in Y-junction microfluidic. In order to achieve phase separation at the end of the microchannel, a phase... 

Sedimentation tanks are one of the important and costly stages of water treatment process in which remained particles from previous stages settle down due to gravity force. In this research, the hydrodynamics of secondary settling tanks without and in the presence of particles is numerically investigated using VOF method in order to simulate the interphase using RNG k-ε for turbulence modelling. The simulations are performed by means of open-source code OpenFoam, and the code is developed to model particles in the flow. The calculated velocity profiles using VOF method show a reasonable agreement with the experimental data. Comparing the concentration profiles with experiments shows the...