Sharif Digital Repository

Mesoscopic hydrodynamic equations are solved employing a VOF based method to investigate the equilibrium shape of nanodroplets positioned over various topographic geometries of the supporting substrate for three-dimensional systems. By taking into account liquid-liquid and liquid-solid interactions a complex distribution for inter-molecular forces over the substrates (the disjoining pressure) is observed. In this research we show that motion of nanodroplets not only caused by contact angle difference in drplets two sides, but also depend on disjoining pressure parameters.Geometries with increasing complexities, from wedges to three dimensional edges and wedges, were explored with the main... 

Drop penetration into the capillary tube, as a classical problem, has been studied over 100 years. But there are a few studies that investigate forced impregnation of capillary tubes, which has major application in coating, inkjet printing and rain drop penetration into the soil, have been made. A comprehensive numerical investigation on millimeter droplet impact dynamics on a thick capillary tube with micrometer sized pore is conducted and validated against experimental data. This work is extended to oblique impact of drops into pores and normal impact on nanoscaled pores. We apply the finite volume numerical method to solve the time-dependent governing equations of continuity, momentum in... 

In this work, the cone-jet mode of electrospray is simulated by a two phase solver in OpenFoam software. For this aim firstly, breakup of a liquid jet is examined without applying any electric potential to the injecting capillary and results are compared with other works to evaluate the two phase solver. Next with applying electric potential, the whole evolution of cone-jet in time is simulated. One of the most important issues in this mode is the minimum potential that needs to form a stable cone-jet in different flow rates. These minimum voltages are obtained in various flow rates and compared with other experimental and computational works. Result shows that with increasing flow rate the... 

Continuous separation processes in microfluidic devices experienced a steep rise in attention during the last two decades. Among the different separation processes, liquid-liquid extraction especially benefits from the short molecular diffusion distance and large specific interfacial area, as these are advantageous for effective mass transport. In the present study, glass-based microfluidic devices have been fabricated utilizing laser ablation and wet chemical etching methods then experiments and numerical simulation were carried out to investigate hydrodynamic behavior of fluid flow in Y-junction microfluidic. In order to achieve phase separation at the end of the microchannel, a phase... 

This study is aimed at simulation of double emulsion formation in a microfluidic double flow focusing device which consists of two cross-junctions connected serially. The water in oil (w/o) emulsions are produced in the first junction. In the second junction, water in oil emulsions are encapsulated by an outer aqueous phase to generate water in oil in water (w/o/w) double emulsions. Water in oil emulsions are formed in hydrophobic channels and water in oil in water double emulsions are formed in hydrophilic channels. A three phase numerical model, based on the VOF-CSF method, is developed for simulating the process of double emulsion formation. An adaptive mesh refinement technique is... 

Entrance of air to close water conduits occurs in many ways. This phenomenon makes displeasing effects on water transport structures. Two-phase flows in closed conduits are studied experimentally, numerically and theoretically. Even after decades, due to the complexity of the subject, these studies still require development and reformation. Numerical and theoretical two-phase models are often limited to a special regime of flow."Volume Of Fluid"(VOF) is a model for non-mixing two-phase flows. "Fluent" software uses this model in this field of flows. Volume of fluid is used successfully in some problems like dam break or rising bubbles. Main disadvantage of this model is distribution of the... 

Airlift pumps are devices for lifting liquid phase incorporating the gas phase to be injected in the bottom of the liquid column. Gas-liquid two-phase flow being the main part of the flow through these systems, flowing in vertical pipes of airlift pumps has different regimes namely bubbly, slug, churn and annular. Generally these regimes appear starting from bubbly to annular from bottom to top of the upriser pipe. Gas/liquid multiphase flows occur in a wide range of natural and man-made situations such as boiling heat transfer, cloud cavitation, bubble columns and reactors in the chemical industry, cooling circuits of power plants, spraying of liquid fuel and paint, emulsions, rain, bubbles... 

In the present work, the deformation and collapse of a single cavitating bubble near solid boundaries is simulated by solving the preconditioned, homogenous, multiphaseNavier-Stokes equations. Up to now, all studies in the literature performed by the volume of fluid (VOF)approach to capture the bubble surface have been based on the pressure-based category in which the flow variables are calculated through solving the Poisson equation. Here, the density-based category is applied and the solution methodology is based on the artificial compressibility approach. The compressible form of the Navier-Stokes equations is applied inside the bubble and the liquid phase is assumed to be incompressible.... 

In the present study a through comparison has been made between different free surface modeling methods. Methods for improving the current schemes are analyzed and studied. Among different proposed methods and based on the current in-house CFD solver’s limitations and capabilities, the Flux-Blending Strategy has been used for interface capturing in the framework of the Finite Volume Method (FVM). The proposed scheme has been coupled with other algorithms for improving the capabilities and functionality of the general computational fluid dynamic software, NUMELS, in order to simulate fluid flows with sharp interface.
The improved interface capturing scheme uses the continuous switching... 

In this research, droplet motion in symmetric and asymmetric junctions in micro and nano scales was investigated. Droplets motion in symmetric and asymmetric junctions have many applications in many industries such as chemical and pharmacy. In this research symmetric T-junction in micro and nano sizes was simulated numerically in 2D and 3D formes. Also asymmetric T-junction (with unequal width branches) was simulated numerically in two cases, 2D and 3D. In the asymmetric T-junction, also an analyrical theory was developed. Numerical simulation was performed by using VOF techniqe and analytical theory was developed by thin film theory. For verifying the accuracy of numerical solution, grid... 

Drop formation from the tip of a nozzle and its motion in bulk fluid is an interesting and practical process which has widely turned researchers’ attention. Investigation into the governing physics and effective parameters on formation, deformation and motion of a drop increases the efficiency of the related industrial processes. Thus in the present study, in order to simulate this process, full Navier-Stokes equations solved by the Volume of Fluid (VOF) method in an axisymmetric domain using Fluent software as the solver. In this research, the effects of Weber number (the proportion of inertial force to surface tension force) and Ohnesorge number (which refers to the proportion of viscous... 

A bioreactor can refer to any device or system constructed on engineering basis and has an active biological medium. This medium includes aerobic and non-aerobic reactions in which organisms and the theire produced substances have the main role. One of the applications of bioreactors is to provide an appropriate medium for animal and plant cell culture and growth. Nowadays many biological processes in high volume scales are carried out in stirred tank bioreactors. In these bioreactors oxygen transfer is usually increased by increasing turbulence which is necessary for mixing nutrients and keeping the homogeneity of the medium. However, there are some limitations for increasing the stirring...