Sharif Digital Repository

BACKGROUND: The clay treatment widely utilized to reduce unsaturated components in aromatic stream has a detrimental effect on catalyst lifetime. Due to the short lifetime of commercial clay, a huge number of studies have been carried out to address this problem over the last decade. This study aims to optimize the temperature for longer serviceability of clay by removal of unsaturated aliphatic components from aromatic streams through the adsorption and catalytic properties of clay. A novel process arrangement is introduced by scheduling the reuse of deactivated clay that is discarded after deactivation. RESULTS: Results showed that the suitable range of temperature for olefin removal is... 

Herein, we demonstrated a facile method for the fabrication of magnetic and superhydrophobic polyurethane sponge with water contact angle of 159° as an adsorbent for cleanup the marine oil spill pollution. For this aim, a polyurethane sponge was coated with carbon black (CB), hexagonal boron nitride (h-BN)@Fe3O4, and acrylic resin and then characterized by different techniques. Owing to the chemical and thermal stability of h-BN and CB, the modified sponge was stable under corrosive conditions (pH = 1–14 and salt solutions) and at different temperatures (−12 °C–105 °C). In addition to common oils and organic solvents, we also used the real spilled oils containing monoaromatics and... 

Herbal medicine wastes (HMWs) are byproducts of medicine factories, which are mainly landfilled for their environmental problems. Only bearing in mind the contamination and concerns caused by the COVID-19 pandemic and environmental emissions, the worth of herbal medicine wastes management and conversion to green products can be understood. In this work, subcritical water treatment was carried out batch-wise in a stainless tube reactor in the pressure range of 0.792–30.0 MPa, varying the temperature (127–327 °C) and time (1–60 min) of extraction. This resulted in new and green material sources, including organic acids, amino acids, and sugars. Amazingly, at very low extraction times (below 5... 

Separating produced water is a key part of production processing for most crude oils. It is required for quality reasons, and to avoid unnecessary transportation costs and prevent pipework corrosion rates caused by soluble salts present in the water. A complicating factor is that water is often present in crude oil in the form of emulsions. Experiments were performed to evaluate the performance of ultrasonic fields in demulsifying crude oil emulsions using novel pipe-form equipment. A horn-type piezoelectric ultrasonic transducer with a frequency of 20 kHz and power ranging from 80 W to 1000 W was used for experimental purposes. The influences of the intensity of ultrasonic fields,... 

Irrigation is not well represented in land surface, hydrological, and climate models. One way to account for irrigation is by assimilating satellite soil moisture data that contains irrigation signal with land surface models. In this study, the irrigation detection ability of SMAP enhanced 9 km and SMAP-Sentinel 1 (SMAP-S1), 3 km and 1 km soil moisture products are evaluated using the first moment (mean) and the second moment (variability) of soil moisture data. The SMAP enhanced 9 km soil moisture product lacks irrigation signals in an irrigated plain south of Urmia Lake, whereas SMAP-S1 products record irrigation signal in soil moisture variability. Despite observing higher variability... 

Bacterial cellulose (BC) is an extracellular natural polymer produced by many microorganisms and its properties could be tailored via specific fabrication methods and culture conditions. There is a growing interest in BC derived materials due to the main features of BC such as porous fibrous structure, high crystallinity, impressive physico-mechanical properties, and high water content. However, pristine BC lacks some features, limiting its practical use in varied applications. Thus, fabrication of BC composites has been attempted to overcome these constraints. This review article overviews most recent advance in the development of BC composites and their potential in biomedicine including... 

Abstract: 3D bioprinting technology is a promising approach for corneal stromal tissue regeneration. In this study, gelatin methacrylate (GelMA) mixed with corneal stromal cells was used as a bioink. The visible light-based stereolithography (SLA) 3D bioprinting method was utilized to print the anatomically similar dome-shaped structure of the human corneal stroma. Two different concentrations of GelMA macromer (7.5 and 12.5%) were tested for corneal stroma bioprinting. Due to high macromer concentrations, 12.5% GelMA was stiffer than 7.5% GelMA, which made it easier to handle. In terms of water content and optical transmittance of the bioprinted scaffolds, we observed that scaffold with... 

As a non-invasive method, photographic imaging techniques offer some interesting potentials for characterization of soil moisture content in unsaturated porous media, enabling mapping at very fine resolutions in both space and time. Although less explored, the wealth of soil moisture data provided by photographic imaging is also appealing for the estimation of unsaturated soil hydraulic parameters through inverse modeling. However, imaging data have some unique characteristics, including high susceptibility to noise, which can negatively affect the parameter estimation process. In this study a sequential data assimilation approach is developed to simultaneously update soil moisture content... 

A cyclic simple shear device was modified for testing coarse-grained soils at unsaturated conditions. A combined methodology of controlling suction for the practical range of coarse-grained soil water retention curves was adopted. Water head control method was used to accurately control suction within capillary and transition zones of such soils. The axis translation technique, on the other hand, was employed as a complementary approach to reach higher suction values within residual zone. In order to evaluate the performance of the new setup, independent cyclic tests were carried out at various initial suctions including all key points and zones along the primary drying path. The analyses of... 

In this study, a novel biodegradable hyaluronic acid (HA) based microgel were prepared via enzymatic crosslinking of tyramine conjugated HA (HA-TA) in an inverse microemulsion. HA-TA microdroplets were crosslinked within a few seconds in the presence of horseradish peroxidase (HRP) and hydrogen peroxide (H 2 O 2 ). The high water content of the polymeric network and the inherent negative charge of the HA-TA microgels provided a suitable platform for encapsulation of cationic proteins like lysozyme and TGF-β1 growth factor. The results demonstrated that lysozyme was released, after an initial burst release, in a suitable sustained manner over a period of four weeks. Both diffusion and... 

Poly (vinyl alcohol) and nano-diamond, PVA/ND, hydrogels were prepared and assessed as prosthetic material suitable for replacement of the nucleus pulposus. The hydrogels were prepared by gamma irradiation at various doses (15 kGy, 25 kGy, 35 kGy, 45 kGy) and at various ND concentrations ranging from 0.25 wt.% to 3 wt.%. Extent of gelation, equilibrium water content, and viscoelastic properties of swelled hydrogels at definite water contents were measured and examined as a function of ND concentration as well as gamma dose. According to viscoelastic measurements, the strength of hydrogels increased considerably over that of pure PVA at a low concentration of ND. By increasing irradiation... 

The burning of fossil fuels such as gasoline, coal, oil, natural gas in combustion reactions results in the production of carbon dioxide. The phase behavior of the carbon dioxide + water system is complex topic. Unlike methane, CO2 exhibits a minimum in the water content. These minima cannot be predicted by existing methods accurately. In this communication, two mathematical-based procedures have been proposed for accurate computation of CO2 water content for tempe-ratures between 273.15 and 348.15 K and the pressure range between 0.5 and 21 MPa. The first is based on least squares support vector machine (LSSVM) algorithm and the second applies multilayer perceptron (MLP) artificial neural... 

In this research, direct conversion of wet algal biomass into biodiesel using supercritical methanol was studied. In this process, microalgal lipids simultaneously was extracted and converted to biodiesel under high pressure and temperature conditions without using any catalyst. Several experiments have been performed to optimize the methanol amount and it has been revealed that the best performance was achieved by using methanol/wet biomass ratio of 8:1. The effect of using various co-solvents in increasing the efficiency of the supercritical process was investigated. It has been shown that hexane was the most effective co-solvent and its optimal ratio respect to wet biomass was 6:1. The... 

Rheological behavior of two crude oils and their surfactant-stabilized emulsions with initial droplet sizes ranging from 0.5 to 75 μm were investigated at various temperatures under steady and dynamic shear testing conditions. In order to evaluate the morphology and Stability of emulsions, microscopic analysis was carried out over three months and average diameter and size distribution of dispersed droplets were determined. The water content and surfactant concentration ranged from 10 to 60% vol/vol and 0.1 to 10% wt/vol, respectively. The results indicated that the rheological properties and the physical structure and stability of emulsions were significantly influenced by the water content... 

An experimental study is conducted to measure small-strain shear modulus of clay-cement mixture using bender element apparatus setup in a triaxial cell. Bender element tests were conducted on cement-treated soils and the results were analyzed to study the variation of shear modulus properties of soil specimens at different cement contents, confining pressures, curing times, and compaction moisture contents. Based on the obtained results increasing the cement ratio has a significant effect on the small-strain shear modulus of the treated soils, and this effect signifies with increasing the moisture content and curing time. Rates of shear modulus enhancements due to cement content, curing... 

The preparation of MCM-41 nanoparticles was made using tetraethylorthosilicate as silica source and cetyltrimethylammonium bromide as surfactant. The X-ray diffraction, transmission electron microscopy, laser particle size analysis and N2 adsorption techniques were used for characterization of nanoparticles. The dimethyldichlorosilan (DMDCS) was applied to improve the dispersion of MCM-41 nanoparticles into the polysulfone (PSF) matrix. The investigation on the thermal stability with thermogravimetric analysis showed the enhanced stability of membranes possessing higher loading of MCM-41 nanaoparticles. The scanning electron microscopy was used to evaluate the quality of particles dispersion... 

Models play an important role in fuel cell design and development. One of the critical problems to overcome in the proton exchange membrane (PEM) fuel cells is the water management. In this work a steady state, two-dimensional, isothermal model in a single PEM fuel cell using individual computational fluid dynamics code was presented. Special attention was devoted to the water transport through the membrane which is assumed to be combined effect of diffusion, electro-osmotic drag and convection. The effect of current density variation distribution on the water content (λ) in membrane/electrode assembly (MEA) was determined. In this work the membrane heat conductivity is considered as a... 

The water-gas shift reaction occurs competitively to the main reaction of the Ir-catalysed methanol carbonylation process. To study the effect of seven factors including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations on the formation of hydrogen and carbon dioxide as a result of the water-gas shift reaction and other side reactions in the carbonylation of methanol to acetic acid, the experimental design method combined with response surface methodology (RSM) was utilised. Central composite design at five levels (with α=1.63) was used to design experiments. A quadratic model that included the main and interaction effects of variables for H 2... 

In this study, central composite design (CCD) at five levels (-1.63, -1, 0, +1, +1.63) combined with response surface methodology (RSM) have been applied to optimise methanol carbonylation using a ruthenium-promoted iridium catalyst in a homogenous phase. The effect of seven process variables, including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations, as well as their binary interactions, were modelled. The determined R 2 values greater than 0.9 for the rate and methane formation data confirmed that the quadratic equation properly fitted the obtained experimental data. The optimum conditions for maximum rate and minimum methane formation were... 

Estimating the feasibility of acid gas geological disposal requires the knowledge of the water content of the gas phase at moderate pressures and temperatures (typically below 50MPa, below 380K) and up to 6mol NaCl. In this paper, a non-iterative model is developed to predict the water content of sour and acid gases at equilibrium with pure water and brine. This model is based on equating the chemical potential of water and using the modified Redlich-Kwong equation of state to calculate the fugacity of the gas phase. The water content of pure CH4, CO2 and H2S are represented with average absolute deviations of less than 3.36, 7.04 and 8.4%, respectively. Experimental data of the water...