Sharif Digital Repository

In this article, droplet size and its distribution along a pulsed liquid-liquid extraction column, is studied where SiO2 nanoparticles with concentrations of 0.01, 0.05 and 0.1vol.% and different hydrophobicities are applied to the dispersed phase. Using ultrasonication, nanoparticles were dispersed in kerosene as the base fluid. Nanofluids' stability was ensured using a UV-vis spectrophotometer. Some 22,000 droplets were measured by photographic technique and results were compared with systems containing no-nanoparticles (Water-Acetic acid-Kerosene). Addition of nanoparticles changed the droplet shape from ellipsoidal to spherical. Also, there was a marked influence on droplet breakage and... 

Wastewater of purified terephthalic acid (PTA) from a petrochemical plant was examined in a membrane-less single chamber microbial fuel cell for the first time. Time course of voltage during the cell operation cycle had two steady phases, which refers to the fact that metabolism of microorganisms was shifted from highly to less biodegradable carbon sources. The produced power density was 31.8 mW m-2 (normalized per cathode area) and the calculated coulombic efficiency was 2.05 % for a COD removal of 74 % during 21 days. The total removal rate of different pollutants in the PTA wastewater was observed in the following order: (acetic acid) > (benzoic acid) > (phthalic acid) > (terephthalic... 

Objective: Crohn's disease (CD) is one the important illnesses can affect any part of the gastrointestinal tract. CD is not easily diagnosed using the clinical tests. Thus, the discovery of proper methods would be a major step towards CD diagnosis. The aim of this study was to seek the metabolic biomarkers causes of CD compare to control group. Materials and Methods: In present study, we employed metabolic profiling using proton nuclear magnetic resonance spectroscopy (1HNMR) to find metabolites in serum which are helpful for the diagnosis of CD. Classification of CD and healthy subject was done using classification and regression trees (CART). The metabolites that caused changes in people... 

Acetic acid is one of the most important petrochemical products. Carbonylation of methanol in homogenous phase is one of the major routes for production of acetic acid. Amongst group VIII metal catalysts used in this process iridium has displayed the best capabilities. To investigate effect of operating parameters like: temperature, pressure, methyl iodide, methyl acetate, iridium, ruthenium, and water concentrations on the carbon dioxide formation, experimental design for this system based upon central composite design (CCD) was utilized. Statistical carbon dioxide formation equation developed by this method contained individual, interactions and curvature effects of parameters on the... 

The pK a of an acyclic aliphatic heptaol ((HOCH 2CH 2CH(OH)CH 2) 3COH) was measured in DMSO, and its gas-phase acidity is reported as well. This tertiary alcohol was found to be 10 21 times more acidic than tert-butyl alcohol in DMSO and an order of magnitude more acidic than acetic acid (i.e., pK a = 11.4 vs 12.3). This can be attributed to a 21.9 kcal mol -1 stabilization of the charged oxygen center in the conjugate base by three hydrogen bonds and another 6.3 kcal mol -1 stabilization resulting from an additional three hydrogen bonds between the uncharged primary and secondary hydroxyl groups. Charge delocalization by both the first and second solvation shells may be used to facilitate... 

The water-gas shift reaction occurs competitively to the main reaction of the Ir-catalysed methanol carbonylation process. To study the effect of seven factors including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations on the formation of hydrogen and carbon dioxide as a result of the water-gas shift reaction and other side reactions in the carbonylation of methanol to acetic acid, the experimental design method combined with response surface methodology (RSM) was utilised. Central composite design at five levels (with α=1.63) was used to design experiments. A quadratic model that included the main and interaction effects of variables for H 2... 

The electrochemical oxidation of sumatriptan on the surface of carbon paste electrode modified with multi-walled carbon nanotube and cobalt methyl-salophen complex is studied by using cyclic voltammetry and polarization studies. The results indicate that the drug is irreversibly oxidized in a one electron oxidation mechanism. It was found that the peak potential shifted negatively with increasing pH, confirms that H + participate in the oxidation process. The electrode is shown to be very effective for the detection of sumatriptan in the presence of other biological reductant compounds. The prepared modified electrode exhibits a very good resolution between the voltammetric peaks of... 

The granular activated carbon (GAC) was used as an adsorbent for its ability to remove haloacetic acids (HAAs) from drinking water by batch and column experiments. Various thermodynamic parameters, such as ΔG°, ΔH° and ΔS° have been calculated. The thermodynamics of HAAs onto GAC system indicates spontaneous and exothermic nature of the process. The ability of GAC to adsorb HAAs in a fixed bed column was investigated as well. The effect of operating parameters such as flow rate and inlet HAAs concentration on the sorption characteristics of GAC was investigated. The total adsorbed quantities, equilibrium uptakes and total removal percents of HAAs related to the effluent volumes were... 

In this study, central composite design (CCD) at five levels (-1.63, -1, 0, +1, +1.63) combined with response surface methodology (RSM) have been applied to optimise methanol carbonylation using a ruthenium-promoted iridium catalyst in a homogenous phase. The effect of seven process variables, including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations, as well as their binary interactions, were modelled. The determined R 2 values greater than 0.9 for the rate and methane formation data confirmed that the quadratic equation properly fitted the obtained experimental data. The optimum conditions for maximum rate and minimum methane formation were... 

Introduction - Recently, there have been growing attention on the modification and optimisation of new extraction and quantification methods, caused by the lack of environmentally friendly methodologies for the extraction of phytochemicals from complex matrices. In the case of pharmaceutical compounds, not only the extraction procedure but also the analysis method should be efficient, precise, fast and easy.Objectives - The essential pharmaceutical characteristics and trace concentration of withanolides led us to modify and optimise the previously reported extraction and quantification procedure for withaferin A (WA) as a candidate for withanolides.Matrial and methods - The WA from the... 

The oxidative desulfurization of a real refinery feedstock (i.e., non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied. The influences of various operating parameters including reaction temperature (T), acid to sulfur molar ratio (nacid/nS), and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated. The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal. Moreover, there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS8 and 23 for the reaction temperatures of 25... 

Self-assembled dandelion-like hydroxyapatite (HAp) nanostructures were successfully synthesized via a mild template-free hydrothermal process, using ethylenediaminetetraacetic acid (EDTA) as the surfactant. The obtained dandelion-like HAp nanostructures were between 5 and 8 μm in diameter and were composed of radially oriented nanorods with an average diameter of about 200 nm. The X-ray diffraction analysis and Fourier transform infrared spectroscopy were used to characterize the crystalline phase and purity of the synthesized nanostructures. The Brunauer-Emmett-Teller surface area of the dandelion-like nanostructures was measured to be about 39 m2/g. The results of thermal analysis revealed... 

A modified solvent microextraction with back extraction method (SME/BE) combined with high performance liquid chromatography and fluorescence detection (HPLC-FD) was developed for the determination of citalopram in human plasma. Extraction process was performed in a home-made total glass vial without using a teflon ring, usually employed in SME/BE. Citalopram was first extracted from 0.5 mL of plasma, modified with sodium hydroxide, into hexane. Back extraction step was then performed into 5.2 μL of 45 mM ammonium formate solution (pH 4) using a GC microsyringe. The extract was subsequently transferred into a liner-like vial and then injected into the HPLC system. An enrichment factor of 150... 

A linear and non-linear quantitative structure-activity relationship (QSAR) study is presented for modeling and predicting heparanase inhibitors' activity. A data set that consisted of 92 derivatives of 2,3-dihydro-1,3-dioxo-1H-isoindole-5-carboxylic acid, furanyl-1,3-thiazol-2-yl and benzoxazol-5-yl acetic acids is used in this study. Among a large number of descriptors, four parameters classified as physico-chemical, topological and electronic indices are chosen using stepwise multiple regression technique. The artificial neural networks (ANNs) model shows superiority over the multiple linear regressions (MLR) by accounting 87.9% of the variances of antiviral potency of the heparanase... 

The reaction kinetics and chemical equilibrium of the reversible catalytic hydrolysis reaction of a methyl acetate to acetic acid and methanol using a strongly acidic ion exchange resin catalyst named Amberlyst 15 were studied. To investigate the different behavior of Amberlyst 15 in the adsorption of reactants and product species, the equilibrium behavior of binary non-reactive liquid mixtures, consisting of one reactant and one product were studied experimentally. The Langmuir model was used to describe the equilibrium condition, quantitatively. Then the employed model was compared with the more complicated thermodynamic models to describe the equilibrium between the catalytic polymer... 

An immersed solvent microextraction (SME) method was successfully developed for the trace enrichment of s-triazine herbicides from aquatic media. A microdrop of butyl acetate was applied as the extraction solvent. After extraction, the microdrop was introduced directly into a gas chromatography-mass spectrometry (GC-MS) injection port. Some important extraction parameters such as type of solvent, extraction time, stirring rate, and temperature were investigated and optimized. The highest possible microdrop volume of 3 μl, a sampling temperature of 60°C, and use of butyl acetate are major parameters to obtain high enrichment factors. The enrichment factor and linearity was studied by... 

Acyclic and cyclic acetates of various alcohols and phenols were obtained in excellent yields under mild reaction conditions in the presence of a catalytic amount of sodium hydroxide under solvent-free conditions and microwave irradiation. Selective deprotection of acetate group from the corresponding phenolic compounds was carried out in the presence of LiClO4· 2H2O. Copyright © Taylor & Francis, Inc