Sharif Digital Repository

Hydrodynamically fully developed flow of power-law fluids under combined action of electroosmotic and pressure gradient forces in rectangular microreactors is analyzed considering heterogeneous catalytic reactions. The Poisson-Boltzmann, Cauchy momentum, and concentration equations are considered in two dimensions and after being dimensionless are numerically solved applying a finite difference algorithm. Variation of axial concentration gradient, and axial and horizontal mass diffusions are taken into account as well. To accomplish a more general analysis, the velocity distribution is obtained by solving continuity and Cauchy momentum equations and is not considered as an average axial... 

A practical mathematical model with low computational time and good accuracy is applied to investigate theaerodynamic characteristics and static height stability of the compound wing-in-ground effect (WIG). The compound WIG consists of a main wing with low aspect ratio and an endplate, and anouter wing with high aspect ratio. To validate the present mathematical model, a numerical simulation is performed so thatnumerical results had a good agreement with the experimental data. The analysis shows that the main wing is useful in the extreme ground effect zone and the outer wing enhances performance of the compound WIG in the weak ground effect zone. In order to satisfy the static height... 

Fluid flow and heat transfer at microscale have attracted an important research interest in recent years due to the rapid development of microelectromechanical systems (MEMS). Fluid flow in microdevices has some characteristics which one of them is rarefaction effect related with gas flow. In this research, hydrodynamically and thermally fully developed laminar rarefied gas flow in annular microducts is studied using slip flow boundary conditions. Two different cases of the thermal boundary conditions are considered, namely: uniform temperature at the outer wall and adiabatic inner wall (Case A) and uniform temperature at the inner wall and adiabatic outer wall (Case B). Using the previously... 

In the present work, the second law of thermodynamics analysis has been carried out for steady state hydrodynamically and thermally fully developed laminar gas flow in annulus microchannels with asymmetrically heated walls. The rarefaction effects are taken into consideration using first order slip velocity and temperature jump boundary conditions. Viscous heating is also included for both the hot wall and the cold wall cases. Using the velocity distribution obtained in earlier works, the energy equation is solved to get analytically the temperature distribution and consequently to compute the entropy generation rate. The effects of rarefaction and the annulus geometrical aspect ratio on... 

The performance of Co-flow fluidic thrust vectoring is a function of secondary flow characteristics and the fluidic nozzle geometry. In terms of nozzle geometry, wall shape and the secondary slot aspect ratio are the main parameters that control the vector angle. The present study aims to find a high quality wall shape to achieve the best thrust vectoring performance, which is characterized by the maximum thrust deflection angle with respect to the injected secondary air. A 3D computational fluid dynamics (CFD) model is employed to investigate the flow characteristics in thrust vectoring system. This model is validated using experimental data collected from the deflection of exhaust gases of... 

Two-phase flow simulations around a body were not studied before and considering these flows can play a significant role in long-term reliability and safety of industrial systems. In this paper, flow regimes, drag coefficient and void fraction around different cross-section prisms were considered. To achieve this aim, main equations of flow have been developed for investigation of drag coefficient in air-water two phase. Our numerical analyses were performed by a designed and written CFD package which is based on Eulerian-Eulerian approach. Geometries, which have been studied in this article, are: circle, rectangle and triangle, for different aspect ratio (length over width) and leading edge... 

Fin stabilizers are very important device for controlling the ship roll motion against the external moments due to wave. This paper presents numerical results for flow field simulation and the hydrodynamic performance of fin stabilizer attached to a ship hull with free surface effects. Combination of CFD and RANS method has been used for this study. The fin is nonrectangular NACA0015 profile section with a finite aspect ratio. The numerical results include pressure distributions and flow field around the fin which are used to calculate lift coefficients and free surface elevation as the main interest. Some results are compared with available experimental and numerical data in literature and... 

Semi-analytical solutions are obtained for the electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties associated with long pH-regulated nanochannels of arbitrary but constant cross-sectional area. The effects of electric double layer overlap, multiple ionic species, and surface association/dissociation reactions are all taken into account, assuming low surface potentials. The method of analysis includes series solutions which the pertinent coefficients are obtained by applying the wall boundary conditions using either of the least-squares or point matching techniques. Although the procedure is general enough to be applied to almost any... 

The viscoelasticity effects on the reaction-diffusion rates in a Y-shaped microreactor are studied utilizing the PTT rheological model. The flow is assumed to be fully developed and considered to be created under a combined action of electroosmotic and pressure forces. In general, finite-volume-based numerical simulations are conducted to handle the problem; however, analytical solutions based on the depthwise averaging approach are also obtained for the case for which there is no reaction between the inlet components. The analytical solutions are found to predict accurate results when the width to height ratio is at least 10 and acceptable results for lower aspect ratios. An investigation... 

Developing low-cost, scalable and reproducible synthesis methods for water oxidation reaction (WOR) catalysts is highly desirable and also challenging in energy, environmental and industrial applications. In this context, electrochemical deposition is known as an easy and cost-effective technique in nanomaterial growth. Herein, cobalt-based nanoflakes were grown on a flexible and commercially available steel mesh substrate by electrodeposition approach with a crystalline structure as a mixture of oxide, hydroxide and oxyhydroxide phases. For the first time, the correlation between electrodeposition parameters, time and current density, and morphological characteristics of the grown... 

A nonlocal continuum-based model is derived to simulate the dynamic behavior of bridged carbon nanotube-based nano-scale mass detectors. The carbon nanotube (CNT) is modeled as an elastic Euler-Bernoulli beam considering von-Kármán type geometric nonlinearity. In order to achieve better accuracy in characterization of the CNTs, the geometrical properties of an attached nano-scale particle are introduced into the model by its moment of inertia with respect to the central axis of the beam. The inter-atomic long-range interactions within the structure of the CNT are incorporated into the model using Eringen's nonlocal elastic field theory. In this model, the mass can be deposited along an... 

This paper reveals the consequences of practicing the 2015 National Earthquake Hazards Reduction Program (NEHRP) soilstructure interaction (SSI) provisions, which form the basis of the 2016 edition of the seismic design standard provided by the ASCE. For this purpose, the probability that the practice of SSI provisions, in lieu of fixed-base provisions, increases the ductility demand of the structure computed. It is subsequently investigated whether the NEHRP provisions are indeed an improvement upon the SSI provisions of the current ASCE seismic design standard. To this end, 720 soil-structure systems with different numbers of stories, structural systems, aspect ratios, and foundation... 

This study aims at introduction of a novel method for evaluating the effect of viscous damping on the aeroelastic stability boundaries. The K-method is well-known for being one of the fastest methods in determining the instability conditions (i.e. critical speed and its corresponding frequency). However, formulation of the K-method is developed for aeroelastic systems without viscous damping and solution is valid where the introduced artificial damping is zero. Taking into account the framework of the K-method in general, this study has tried to remove the major shortcoming of the K-method, i.e. investigation of the effect of viscous damping on the aeroelastic stability boundaries. The... 

In this article, the vibration frequency of an orthotropic nanoplate under the effect of temperature change is investigated. Using nonlocal elasticity theory, governing equations are derived. Based on the generalized differential quadrature method for cantilever and propped cantilever boundary conditions, the frequencies of orthotropic nanoplates are considered and the obtained results are compared with valid reported results in the literature. The effects of temperature variation, small scale, different boundary conditions, aspect ratio, and length on natural nondimensional frequencies are studied. The present analysis is applicable for the design of rotating and nonrotating nano-devices... 

Infinite series solutions are obtained for electrical potential, electroosmotic velocity, ionic conductance, and surface physicochemical properties of long pH-regulated rectangular nanochannels of low surface potential utilizing the double finite Fourier transform method. Closed form expressions are also obtained for channels of large height to width ratio for which the depthwise variations vanish. Neglecting the Stern layer impact, the effects of EDL (Electric Double Layer) overlap, multiple ionic species, and association/dissociation reactions on the surface are all taken into account. Moreover, finite-element-based numerical simulations are conducted to account for the end effects as well... 

This paper presents an analysis of the combined electro-osmotic and pressure-driven axial flows of viscoelastic fluids in a rectangular microchannel with arbitrary aspect ratios. The rheological behavior of the fluid is described by the complete form of Phan-Thien–Tanner (PTT) model with the Gordon–Schowalter convected derivative which covers the upper convected Maxwell, Johnson–Segalman and FENE-P models. Our numerical simulation is based on the computation of 2D Poisson–Boltzmann, Cauchy momentum and PTT constitutive equations. The solution of these governing nonlinear coupled set of equations is obtained by using the second-order central finite difference method in a non-uniform grid... 

This experimental work is an attempt to identify the most significant parameters influencing heat transfer enhancement in annular flow with outer grooved cylinder and rotating inner cylinder. This type of flow known as Taylor-Couette flow has many industrial applications such as electrical power generators and rotating machineries. A comprehensive review of the previous works on flow regimes, heat transfer and pressure drop in grooved channels is provided. The experiments are conducted based on four different factors including Taylor number, 0