Sharif Digital Repository

Achieving dense off-chip interconnection with satisfactory electrical performance is emerging as a major challenge in advanced system engineering. Graphene nanoribbons (GNRs) have been recently proposed as one of the potential candidate materials for both transistors and interconnect. In addition, development is still underway for alternative materials and processes for high aspect ratio (AR) contacts. Studding the effect of varying aspect ratio on relative stability of graphene nanoribbon interconnects is an important viewpoint in performance evaluation of system. In this paper, Nyquist stability analysis based on transmission line modeling (TLM) for GNR interconnects is investigated. In... 

Purpose - The purpose of this paper is to comprehensively review most of the significant works ever done worldwide to study the effects of essential parameters on pulsed plasma thruster (PPT) performance and to analyze the effects of each parameter on PPT performance. Design/methodology/approach - All the important works studying PPT performance are categorized by the parameter they have studied and its effect on the thruster performance, and their works have been reviewed to analyze the influence of each parameter. Findings - The analysis leads to elucidation of the effects of different geometrical parameters including aspect ratio, electrode width, electrode spacing, electrode shape,... 

Electroosmosis is the predominant mechanism for flow generation in lab-on-chip devices. Since most biofluids encountered in these devices are considered to be non-Newtonian, it is vital to study the flow characteristics of common non-Newtonian models under electroosmotic body force. In this paper, the hydrodynamically fully developed electroosmotic flow of power-law fluids in rectangular microchannels is analyzed. The electrical potential and momentum equations are numerically solved through a finite difference procedure for a non-uniform grid. A thoroughgoing parametric study reveals that the Poiseuille number is an increasing function of the channel aspect ratio, the zeta potential, the... 

A phenomenological discrete bubble model has been developed for freely bubbling dense gas-solid fluidized beds and validated for a pseudo-two-dimensional fluidized bed. In this model, bubbles are treated as distinct elements and their trajectories are tracked by integrating Newton's equation of motion. The effect of bubble-bubble interactions was taken into account via a modification of the bubble velocity. The emulsion phase velocity was obtained as a superposition of the motion induced by individual bubbles, taking into account bubble-bubble interaction. This novel model predicts the bubble size evolution and the pattern of emulsion phase circulation satisfactorily. Moreover, the effects... 

Particle transport and deposition in a channel flow with elliptic obstruction is studied. Numerical simulation of fluid flow is performed using two-dimensional lattice Boltzmann method, while one-way coupling Lagrangian method for particle tracking is used. Standard particles are injected in the inlet of the channel. Gravity, Drag force, Brownian forces, and the Saffman lift are considered in equation of particle motion. The influence of geometrical parameter, ellipse aspect ratio, is studied on dispersion and deposition of particles as well as the flow parameters, such as Reynolds number. In addition, the effect of particles size -particles of 0.01-10μm in diameter- on dispersion and... 

The network structure of styrene-butadiene rubber (SBR) in the presence of carbon black (CB) with two different structures and multi-walled carbon nanotubes (MWCNTs) was investigated. Swelling behaviour, tensile properties at various strain rates and cure kinetics were characterized. Experimental data were analysed using the Flory-Rehner model as well as the tube model theory. It is found that the network structure of CB-filled SBR follows a three-phase composite model including rigid particles, semi-rigid bound rubber and matrix rubber. This bound rubber is postulated to be critical for the mechanical and deformational properties, development of crosslinking density in matrix rubber and... 

The finite number of toroidal field coils of a tokamak destroys the perfect axisymmetry of the device. The coils produce a short wavelength ripple in the toroidal magnetic field strength as a field line follows round the torus, which becomes important in transport and confinement properties of plasma. Hence, a quick and accurate estimation of ripple becomes important. We have noticed that a previously reported analytical formulation by Princeton Plasma Physics Laboratory team is not applicable to our large aspect ratio tokamak, and have devised a slightly modified form which has greatly improved the accuracy of the analytical fit  

The sliding frictional contact problem for a laterally graded half-plane has been considered. Two finite element (FE) models, in macro and micro scales have been developed to investigate the effective parameters in contact mechanics of laterally graded materials loaded by flat and triangular rigid stamps. In macro scale model, the laterally graded half-plane is discretized by piecewise homogeneous layers for which the material properties are specified at the centroids by Mori-Tanaka method. In micro scale model, functionally graded material (FGM) structure has been modeled as ideal solid quadrant particles which are spatially distributed in a homogeneous matrix. Boundary conditions and... 

The properties of metallic nanorods vary due to changes in their composition, size and shape, which all depend on the aspect ratio of the nanorods. This work focuses on the optimization of the aspect ratio of silver nanorods using response surface methodology (RSM). Seed-mediated approach, which is the newest method with less difficulty, has been used for the synthesis of silver nanorods. First, silver ions were reduced with sodium borohydride in the presence of sodium citrate dehydrate, as stabilizer. Then, the prepared seeds were added to a solution containing more metal salts, a weak reducing agent (ascorbic acid) and a rod-like micellar template (cetyltrimethylammonium bromide, CTAB).... 

This paper aims the nonlinear aeroelastic analysis of slender wings using a nonlinear structural model coupled with the linear unsteady aerodynamic model. High aspect ratio and flexibility are the specific characteristic of this type of wings. Wing flexibility, coupled with long wingspan can lead to large deflections during normal flight operation of an aircraft; therefore, a wing in vertical/forward-afterward/torsional motion using a third-order form of nonlinear general flexible Euler-Bernoulli beam equations is used for structural modeling. Unsteady linear aerodynamic strip theory based on the Wagner function is used for determination of aerodynamic loading on the wing. Combining these... 

The governing differential equation of motion of a thin rectangular plate excited by a moving mass is considered. The moving mass is traversing on the plate's surface at arbitrary trajectories. Eigenfunction expansion method is employed to solve the constitutive equation of motion for various boundary conditions. Approximate and exact expressions of the inertial effects are adopted for the problem formulation. In the approximate formulation, only the vertical acceleration component of the moving mass is considered while in the exact formulation all the convective acceleration components are included in the problem formulation as well. Parametric studies are carried out to investigate the... 

The nonlinear equation of motion for pre-stretched EulerBernoulli beams is derived. The effect of pre-tension and pre-compression in EulerBernoulli beams is studied. It is shown that compressive strain affects the bending stiffness much more than tensile strain. Based on the derived equation, the dynamic model of bimorph piezo-actuated beams, which is accurate, yet simple, is then developed. Afterwards, the critical voltage, which makes the piezo-actuated microbeam unstable, is numerically investigated. It is shown that the strain of the centerline is proportional to the beam's aspect ratio squared. Results show that the more the aspect ratio, the less the critical voltage. In addition, it... 

Simplicity of manufacturing and high reliability of airlift pumps have promoted these pumps to be used in different industries, such as petrochemical and oil industries, especially in oil recovery from dead wells. One of the main parameters affecting the performance of these pumps is two-phase flow regime in the main pipe of the pump. In this research, experimental data are utilized to investigate the influence of the flow regimes on the performance of an airlift pump. The data are obtained for air-water two-phase flow in a vertical pipe with a diameter of d = 50. mm and an aspect ratio of L/d = 120. In this study, the gas liquid upward two-phase flow regime in the upriser pipe is... 

Liquid storage tanks are essential structures that are often located in residential and industrial areas; thus an assessment of their seismic performance is an important engineering issue. In this paper, the seismic response of unanchored steel liquid storage tanks is investigated using the endurance time (ET) dynamic analysis procedure and compared to responses obtained for anchored tanks under actual ground motions and intensifying ET records. In most cases, the results from ground motions are properly obtained with negligible differences using ET records. It is observed that uplifting of the tank base, which is closely related to the tank aspect ratio, has the greatest significance in the... 

Reinforcement of styrene-butadiene-rubber (SBR) was investigated using two different carbon blacks (CBs) with similar particle sizes, including highly structured CB and conventional CB, as well as multi-walled carbon nanotube (MWCNT) prepared by mechanical mixing. The attempts were made to examine reinforcing mechanism of these two different classes of carbon nanoparticles. Scanning electron microscopy and electrical conductivity measurement were used to investigate morphology. Tensile, cyclic tensile and stress relaxation analyses were performed. A modified Halpin-Tsai model based on the concept of an equivalent composite particle, consisting of rubber bound, occluded rubber and... 

Cadmium sulfide (CdS) with different morphologies was successfully prepared by solvothermal process by controlling the processing parameters, including nature of precursor and solvent, reaction temperature and process time. X-ray diffraction patterns revealed that, in all cases highly pure and crystallized CdS with hexagonal structure were obtained. In addition, it was found that the processing parameters influence on preferable growth direction of CdS nanostructures. Field emission scanning electron microscope analysis showed that CdS nanowires with different aspect ratios were obtained (depending upon the reaction temperature and process time) in presence of sulfur powder and... 

Extensive wind tunnel tests were performed on several wing- body-tail combinations in subsonic flow to study the effects of wing geometric parameters on the flow field over the tail. For each configuration, tail surface pressure distribution, as well as the velocity contour at a plane perpendicular to the flow direction behind the wing was measured. The results show a strong effect of wing to tail span ratio, as well as wing aspect ratio, on the flowfield downstream of the wing. For low sweep wings, as those considered here, wing and body interference effects on the tail are associated with the wing tip vortex and nose-body vortex  

During the recent decade, high induction diffusers have become more appealing in applications which require relatively high ventilation airflow rates, such as clean rooms. In this research, the effect of geometric parameters on the performance of a specific type of swirling air diffuser is investigated numerically. The results show that although the diffuser slots geometry, namely their angle and aspect ratio, is impressive on the diffuser performance, it is not as important as the swirling blade angle and the performance is almost constant in a wide range of slots specifications. The results also demonstrate that the diffuser performance and the resultant indoor airflow distribution highly... 

Cadmium sulfide (CdS) nanowires and nanorods with different aspect ratios were successfully synthesized by the solvothermal method aided with various solvents, namely ethylenediamine, ethanolamine and triethylene tetraamine. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analyses revealed that, highly pure CdS nanostructures were crystallized with different structures and preferable growth orientations depending on solvent nature. Field emission electron microscope (FE-SEM) images showed that the aspect ratio of CdS nanostructures depends upon the dielectric constant and boiling temperature of solvents. CdS nanostructures with the highest aspect ratio in the form... 

Nanostructured AA6063 (NS-Al) powder with an average grain size of ~100. nm was synthesized by high-energy attrition milling of gas-atomized AA6063 powder followed by hot extrusion. The microstructural features of the consolidated specimen were studied by transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD) techniques and compared with those of coarse-grained AA6063 (CG-Al) produced by hot powder extrusion of gas-atomized powder (without using mechanical milling). The consolidated NS-Al alloy consisted of elongated ultrafine grains (aspect ratio of ~2.9) and equiaxed nanostructured grains. A high fraction (~78%) of high-angle grain boundaries with average...