Sharif Digital Repository

This paper deals with the issue of economic batch quantity (EBQ) in a single machine system in which defective items are produced in each cycle of production. The defective items produced in the first N cycles are accumulated at the end of the Nth cycle and are all reworked in a separate cycle called the rework cycle which has the same length as the other cycles and begins just at the end of the Nth cycle. At the end of the rework cycle the whole process will start all over again. For this system, assuming no shortages are permitted we obtain the economic batch quantity which minimizes the total cost  

A batch extraction of an essential amino acid, Phenylalanine, from an aqueous solution of different concentrations by an Emulsion Liquid Membrane (ELM) was developed using D2EHPA as a cationic carrier, Span 80 as the surfactant, paraffin and kerosene as the diluents, and HCl as the internal electrolyte. All effective parameters such as pH of initial aqueous external phase, electrolyte concentration in aqueous internal phase, carrier and surfactant concentration in emulsion, volume ratio of the organic to aqueous internal phase (Roi), volume ratio of the W/O emulsion to aqueous external phase (Rew) and time were examined and optimized using Taguchi method which was the first time of... 

In this research, the separation of tellurium from selenium was studied from chloride solution by TBP extractant. In the batch experiments, the experimental findings indicated that the feed acidity, TBP concentration, and contact time were optimized to achieve the high separation factor. In continuous mode of pulsed disc and doughnut column, the impacts of operating parameters have been discussed on the distribution coefficients of selenium and tellurium, and mass transfer enhancement. A new model for predicting Koca was proposed in terms of holdup values, Sherwood, Reynolds, and Schmidt numbers, which has an acceptable agreement with the mass transfer data. © 2020 Taylor & Francis Group,... 

The effects of temperature, seed mass and agitation rate on agglomeration kinetics of aluminum hydroxide in Bayer process have been studied in a batch system. Collected raw data were analyzed and the kinetics data of agglomeration were derived through simulation of the process using a pre-developed software. The results showed that agglomeration kinetics constant (agglomeration kernel) increases with increase in temperature and agitation rate. Moreover a maximum value of agglomeration rate versus added seed mass was observed. Furthermore the magnitude of calculated activation energy of agglomeration was close to that of growth  

This study proposes a multi-objective control algorithm for simultaneous process and quality control in non-Gaussian stochastic batch processes. The objective is to control a non-Gaussian process so that each batch is delivered within a pre-specified time. During each batch, the process is controlled by a fixed-parameter PI controller. Between any two adjacent batches the controller parameters are updated by a differential evolution algorithm so that the integral squared of tracking error, entropy of tracking error, integral of absolute processing time error and entropy of processing time error are minimised. the proposed algorithm is applied to a batch continuously stirred tank reactor... 

In this work the application of a modified surface nano zero valent iron (NZVI) as bimetallic Fe/Cu particles to remove high concentration of NO3--N through packed sand column has been studied. Dispersed nano-Fe/Cu particles has been synthesized in water mixed ethanol solvent system (1:4v/v) and described by XRD pattern, TEM and SEM images and BET analyze. Batch experiments have been conducted to investigate the effect of percentage coating of Fe0 by Cu on the nitrate removal. Research on packed sand column (120cm length, 6.5cm inner diameter) has been done under conditions of Nano-Fe/Cu concentration (2, 5, and 8gl-1 of solution), high initial NO3--N concentration (100, 200, and 300mgl-1)... 

In this study, the ability of Aspergillus niger and Penicillium simplicissimum to extract heavy metals from a spent refinery catalyst was investigated. For the first step, a spent processing catalyst from one of the oil refineries in Iran was physically and chemically characterized. Aspergillus niger and Penicillium simplicissimum were used to mobilize Al/Co/Mo/Ni from hazardous spent catalysts. The fungi were adapted to the mixture of metals at 100-800 mg L -1 with increments in concentration of 100 mg L -1. Bioleaching experiments were carried out in batch cultures. To investigate the production of organic acids in sucrose medium, analyses of the culture medium by HPLC were performed at... 

A spent processing catalyst from an Iranian oil refinery was initially characterized physically and chemically. Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were used to mobilize Al, Co, Mo and Ni from the spent catalysts under optimized conditions in batch cultures. The characteristics of the bioleach solution (pH, Eh, cell concentration and Fe(II)/Fe(III) concentration) were determined along with the concentration of metal values extracted from the catalyst. The results showed that after bioleaching using A. ferrooxidans in the presence of ferrous sulfate, maximum extractions of 63% Al, 96% Co, 84% Mo and 99% Ni were achieved after 30 days at pH 1.8-2.0. However, the... 

In this investigation, a spent processing catalyst from one of the oil refineries in Iran was initially characterized physically and chemically. Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were used to mobilize aluminum, cobalt, molybdenum and nickel from hazardous spent catalysts. Bioleaching experiments were performed in batch cultures. The growth characteristics of the bacteria (pH, Eh, cell concentration and ferrous and ferric iron concentration) were determined during bioleaching along with the concentration of metal values extracted from the catalyst. The results obtained from Inductive coupled plasma-optical emission spectrometry (ICP-OES) showed that after the... 

The feasibility of employing the biological activated carbon (BAC) process to debilitate azo dye Carmoisine by Klebsiella spp. was investigated. Plate assay revealed the capability of Klebsiella spp. for removal of Carmoisine via degradation. Kinetic parameters were measured for Carmoisine debilitation by Klebsiella spp. using the suspended anaerobic process. Two types of granular and rod-shaped activated carbon were used to form the biological beds in order to study the Carmoisine debilitation in batch processes. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to indicate the colonization and biofilm formation of bacteria grown on activated carbon... 

Chinese hamster ovary cells are the main cellular factories for production of a wide range of recombinant proteins in biopharmaceutical industry. Recombinant human Interferon beta-1a (rh-IFN β-1a), as a cytokine is broadly used to treat multiple sclerosis. In this work, the cell line producing rh-IFN β-1a was studied to improve cell density along with the specific expression. For this reason different cell culture experiments were done using different commercial serum-free media to find the appropriate media providing higher cell density. It was shown DMEMF12, DMEM:ProCHO5, and CHO-S-SFM II led to higher cell density and shorter doubling time. Next, using these media, fed-batch, and...