Sharif Digital Repository

The present work developed a mixed-mode cohesive zone model (CZM) with a mode I failure criterion to predict the delamination bending loads of multilayer, composite printed circuit boards (PCBs) assembled with soldered ball grid array (BGA) components that were reinforced with an underfill epoxy adhesive. Two different delamination modes were observed in these microelectronic assemblies: delamination at the interface between the solder mask and the first conducting layer of the PCB, and PCB subsurface delamination at the interface between the epoxy and glass fibers of one of the prepreg layers. The cohesive parameters for each of the two crack paths were obtained from fracture tests of... 

This paper investigated the combined utilization of recycled waste ceramic aggregate (RWCA) and waste carpet fibers (WCFs) in high strength concrete (HSC). Concrete mixes containing different percentages of RWCA including 20%, 40%, 60% (by weight) as partial replacement of natural coarse aggregate (NCA) were prepared. To enhance the tensile and flexural strength of concrete, 1.0% (by volume) WCF was added to the mixes. The slump and density of the fresh concrete were evaluated, both of which demonstrated a decreasing trend with incorporation of RWCA and WCF. With regard to the hardened concrete, replacing 40% of NCA with RWCA led to the optimum mechanical properties and increased the... 

The relation between process parameters and properties of polycarbonate (PC) sheet after friction stir welding (FSW) was investigated. Effects of FSW tool rotation speed (ω), travelling speed (V), tilt angle (α) and plunge depth on material flow, joint tensile strength, flexural strength, impact energy and hardness were investigated. It is shown that at low and high levels of heat input sound joints cannot be attained. At low heat inputs, the local temperature is not high enough to decrease the viscosity of the polymer to fill the interface, and thus voids and large planar cracks are formed in the joint root and stir zone. At high heat inputs, expelling of materials due to high peak... 

We present a new semi-solid state procedure for efficient joining of dissimilar materials. The process called fed friction stir processing (FFSP) and works based on in-situ injection of colloidal nanoparticles in the welding line during processing. To present the efficiency of the process, friction stir welding of AA6062 aluminum alloy and poly(methyl methacrylate) (PMMA) through injection of alumina nanoparticles is presented. Microstructural features and mechanical characteristics of the weldments are elaborated. It is shown that in-situ feeding of the alumina nanoparticles during FFSP changes the thermo-mechanical regimes of the bonding zone and decreases the thickness of interaction... 

Yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) have been widely applied in fixed partial prostheses as well as dental uses i.e. a substructure for crowns. However, Y-TZP has limited applications, which is due to the presence of defects in its microstructure introduced during the manufacturing process. Accordingly, due to Y-TZP limitations, the novel (X)Y-TZP- 20Al2O3-(80-X) SiO2 (X = 65, 70 and 75) ceramic nanocomposites were successfully fabricated via the powder metallurgy method. X-ray diffraction (XRD) patterns of commercial powders showed the stabilization of monoclinic zirconia (ZM) by increasing the silica content. In order to determine the fracture load and micro-bending... 

Every year, about a thousand million tires reach the end of their service life, more than half of which are disposed of in landfills. The waste tire rubber has a great potential for application as aggregate phase in production of lightweight concrete/mortar. This study is aimed at evaluating the effects of using crumb rubber (CR) as fine aggregate at replacement ratios of 0–60% (by volume) in alkali-activated slag mortars. Furthermore, polypropylene fibre (PPF) was used at 0.5% and 1% of volume of the mix to enhance the properties of mortar mixes such as flexural strength and shrinkage behaviour. The compressive strength, flexural strength, water absorption, thermal conductivity, drying... 

An Al-5 wt% Ti composite was fabricated via powder metallurgy technique and hot extrusion. The produced composite samples were heat-treated subsequently at 600 °C for various time durations of 0, 4 and 10 h to achieve different volume fractions of the intermetallic Al3Ti phase. Pure aluminum sample was produced as a benchmark specimen to be compared to the composite samples. SEM studies were used to investigate the microstructure of the composite samples, and it was revealed that core-shell structured particles were formed in the composite heat-treated for 4 h. Triple point bending test was performed on the single edge notched beam specimens of the heat-treated Al-5 wt% Ti composite and the... 

In this study the influence of the molar ratios such as SiO2:Al2O3:Na2O:H2O, as well as the sand particles on the mechanical performance, shrinkage and microstructure of metakaolin based geopolymers was studied. Considering different content of the reactive silica and alumina in metakaolin, forty eight different compositions were prepared. The proper condition for achieving the highest mechanical performance as well as less structural defects by tailoring the curing condition, molar ratios and addition of sand particles are presented. Special attention was paid to the incorporation of sand particles up to 70 wt% on the microstructure, shrinkage and mechanical properties of metakaolin based... 

Every year, about a thousand million tires reach the end of their service life, more than half of which are disposed of in landfills. The waste tire rubber has a great potential for application as aggregate phase in production of lightweight concrete/mortar. This study is aimed at evaluating the effects of using crumb rubber (CR) as fine aggregate at replacement ratios of 0–60% (by volume) in alkali-activated slag mortars. Furthermore, polypropylene fibre (PPF) was used at 0.5% and 1% of volume of the mix to enhance the properties of mortar mixes such as flexural strength and shrinkage behaviour. The compressive strength, flexural strength, water absorption, thermal conductivity, drying... 

Alkali-activated slag (AAS) binder has been recognized as a suitable material for construction applications owing to its low carbon footprint and good mechanical and durability performance. As a promising alternative to the conventional Portland cement binder, it is important to maximize the performance of AAS composites under normal and harsh environmental conditions such as exposure to fire. The use of fibers in a brittle matrix is a well-known approach to enhance the mechanical strength and cracking behavior under thermal loading. In this study, polypropylene fiber (PPF), glass fiber (GF), and basalt fiber (BF) are used at volume fractions of 0.5%, 1%, and 1.5% in AAS mortar mixes. First,... 

This paper deals with an experimental investigation into the mechanical performance and microstructure characteristics of the cementitious mortars containing recycled waste materials subjected to acidic, neutral and alkaline environments. The recycled waste materials include glass, eggshell, iron and rubber powder in various amounts, namely 7, 14 and 21% by volume, as the replacement for ordinary Portland cement (OPC). In this respect, to examine the mechanical performance of the specimens, the compressive, tensile and bending strength tests as well as water absorption test were carried out at the ages of 7, 28 and 90 days. Moreover, to study the microstructure of the specimens, the scanning... 

Up to 8wt. % of Nano-iron oxide was added to CaO refractory matrix. The crystalline phases and microstructure characteristics of specimens sintered at 1650°C for 5h in an electric furnace were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The physical properties are reported in terms of bulk density, apparent porosity and hydration resistance. The mechanical behavior was studied by a cold crushing strength (CCS) and flexural strength at 1200°C test. As a result, it was found that the presence of Nano-iron oxide in the CaO refractory matrix induced 2CaO.Fe2O3 (C2F), CaO.Fe2O3 (CF) and 3CaO.Al2O3 (C3A) phase's formation, which improved the sintering... 

In the seismic design of steel special moment frames, it is necessary to ensure that columns are generally stronger than beams. This reduces the probability of a weak story failure mechanism of the frame and ensures the formation of beams' plastic hinges earlier than the columns'. This criterion is known as strong column-weak beam (SCWB) in seismic design codes and is checked by a formula in the form of a ratio of total flexural strengths of columns to beams framing at each joint. It is common practice to ignore the column section change at the splice location and to use the flexural strength of the larger column section in evaluating this ratio. In this paper, several steel special moment... 

This research studies the effect of glass fiber-reinforced polymer (GFRP) bars as compressive reinforcement in reinforced concrete (RC) beam members. Three singly and six doubly reinforced GFRP-RC beams were tested under a four-point loading configuration. The effect of compressive reinforcement on the load-bearing capacity, ductility, stiffness, and failure mode is determined. Also, the compressive performance of GFRP bars is evaluated by testing GFRP-RC cylinders. According to the results, GFRP bars in compression had a limited contribution to enhancing flexural strength, and the maximum increment in the flexural capacity of doubly reinforced beams compared to singly reinforced specimens... 

The initial and subsequent yield surfaces for architected pyramidal lattice materials are investigated analytically. Considering lattice struts as elastic-perfectly plastic thin beams subjected to both axial force and bending moment, a set of nonlinear elastic-plastic constitutive relations for a strut is proposed. Moreover, we phenomenologically present anisotropic pressure-dependent yield functions for pyramidal lattices. Comparison of planar yield surfaces of pyramidal lattices predicted by analytical approach to the ones obtained from phenomenological models shows a good agreement for the type of external loads and range of strains investigated in this study. Investigating the normality... 

Self-compacting concrete (SCC) is a highly-workable concrete that without any vibration or impact and under its own weight fills the formwork, and it also passes easily through small spaces between rebars. In this paper, the effect of steel fibers on rheological properties, compressive strength, splitting tensile strength, flexural strength, and flexural toughness of SCC specimens, using four different steel fiber volume fractions (0.5%, 1%, 1.5%, and 2%), were investigated. Two mix designs with strengths of 40 MPa (medium strength) and 60 MPa (high strength) were considered. Rheological properties were determined through slump flow time and diameter, L-box, and V-funnel flow time tests.... 

In this work, cristobalite crystallization and its effects on mechanical and chemical behaviour of injection moulded silica-based ceramic cores were investigated. In order to simulate casting process condition, the sintered samples at 1220 °C were also heated up to 1430 °C. Flexural strength test was carried out on both sintered and heat treated samples. Chemical resistance of the cores was evaluated by leaching the samples inside 43. wt% KOH solution at its boiling point. Phase evolution and microstructure were investigated by thermal analyses (DTA and DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical microscopy (OM). Results showed that cristobalite was... 

Addition of fine zirconia particles in the alumina matrix in order to produce ZTA composite is a well-known method for improving the mechanical properties of alumina ceramics such as flexural strength and fracture toughness. Increasing homogeneity and reducing alumina grain size are two key factors for achieving proper mechanical properties in this ceramic matrix composite. In this work two batches of ZTA powder precursor were prepared through mixing of alumina and zirconia by ball milling and in situ synthesis of ZTA composite via solution combustion method. The bending strength testing samples were fabricated through gel-casting process. The effects of different powder processing methods... 

This paper presents the results of an experimental study on the flexural behavior of ten 10 × 15 × 120 (cm) steel reinforced high strength concrete beams under deflection control loading conditions. Test variable includes volumetric percentage of steel fibers (0%, 1.5%, 3%, 4%, 5%). The plain concrete strength was 30MPa. The monotonic concentrated load was applied at the center of the beam, the relative deflection was measured, and demec points were used to determine curvature of the beam. Load-deflection and moment-curvature diagrams have been obtained and plotted for each beam individually. Test results indicate that higher fiber content considerably improves flexural behavior and provides... 

Foamy Al alloy SiCp composites of different densities ranging from 0.4 to 0.7g/cm3 were manufactured by melt-foaming process, which consisted of direct CaCO3 addition into the molten A356 aluminum bath. Mechanical properties and morphological observations indicated that the three-stage deformation mechanism of typical cellular foams is dominant in the produced A356 aluminum foams. Middle-stage stress plateau shrinkage plus compressive strength and bending stress enhancements were observed in denser foams. With the same Al/SiCp ratio, energy absorption ability and plastic collapse strength of the closed-cell foams were increased with the foam density. Doubling cell-face bending effects...