Sharif Digital Repository

In optimum designing of wireless power transfer(WPT) coils, maximum efficiency and maximum power transfer capability of coils should be considered. In this paper, a novel technique for optimum design of WPT coils based on maximum efficiency with considering required power transfer capability has been given. Optimum selection of system parameters including coil and wire dimensions, number of turns of coils and compensation capacitor selection based on minimum weight of copper mass is also given. For evaluation purpose a 100W experimental sample is designed and tested in 20cm range  

In this study, a thermal method was used to synthesize spinel NiCo2O4 and carbon nanotubes (CNTs)@NiCo2O4 with an average size 50 nm and 20 nm, respectively. Addition of CNTs into NiCo2O4 noticeably increases the active surface area compared to pure spinel NiCo2O4. SEM analyses showed that the morphologies are spherical in both pure and composite samples. Uniform CNTs@NiCo2O4 nanoparticles exhibit high specific capacitance of 210 F g−1 at 2 A g−1 and a good retention capacity of 92.70% after 2500 cycles, which shows a considerable improvement compared to NiCo2O4. Additionally, an exceptional rate capability of about 73.2% was obtained at 50 A g−1. Such remarkable electrochemical performance... 

In this paper, conditions for checking the realizability of fractional-order impedance functions by passive networks composed of a fractional element (either a fractional capacitor or a fractional inductor) and some RLC components are derived. To this end, at first the newly obtained conditions for realizability of fractional-order impedance functions by a passive network composed of a fractional capacitor and some RLC components are extended to include the case that the polynomials involving in the impedance function can have roots on the imaginary axis. Then, the necessary and sufficient conditions are found on a fractional-order impedance function to be realized by a passive network... 

Due to unique advantages, the development of high-performance supercapacitors has stimulated a great deal of scientific research over the past decade. The electrochemical performance of a supercapacitor is strongly affected by the surface and structural properties of its electrode materials. Herein, we report a facile synthesis of high-performance supercapacitor electrode material based on CuS nano-hollow spheres with nanoporous structures, large specific surface area (97 m2 g−1) and nanoscale shell thickness (<20 nm). This interesting electrode structure plays a key role in providing more active sites for electrochemical reactions, short ion and electron diffusion pathways and facilitated... 

This paper proposes a new method to detect and classify all kinds of faults, capacitor switching, and load switching in a power system network based on wavelet transform and support vector machines (SVMs). In this regard, a sample of a power system is simulated via MATLAB/Simulink, and by reading the voltage of the point of common coupling and using the wavelet transform, the differences of the outputs of the wavelet transform are investigated. The SVM approach is employed to distinguish the type of the transient (capacitor switching, fault, and/or load switching) in use for the high level outputs of the wavelet transform. Similar to neural networks, this method, which is based on learning,... 

Electric field enhanced approach has been used to synthesize different copper hydroxide morphologies as high-performance supercapacitors electrode materials. Employing this efficient, simple and low cost method, various shapes such as rod, flower and cube with an average grain size of 30nm to 1μm were obtained on the copper substrate. The results revealed that applied electric field considerably accelerates the formation time of nanostructures from several days to close to 1min, where some of the desired nanostructures were obtained even in 1s. The electrochemical properties of different morphologies were compared using cyclic voltammograms and charge/discharge tests and electrochemical... 

Nonlinear transmission lines (NLTLs) are one of the most prominent solid-state sources of high-power RF pulses. However, there is no integrated mathematical basis, which predicts adequately the generated waveforms on an NLTL and those delivered to the load. This analysis is required for designing and optimizing these transmission lines. Most works in this area are related to experimental studies and results. In this paper, we have developed a theoretical basis, which predicts all the required characteristics of the generated RF pulses on a lossy NLTL. The RF amplitude, the maximum voltage, and the central frequency of the generated pulses at each node of an NLTL are formulated. All the... 

In new 400 volt energy distribution systems for telecommunication sites and data centers power density is an influential factor which is commonly desired to be provided such that the systems occupy a small space. On top of that in 400 volt energy distribution systems galvanic isolation is investigated to be inevitable. In this paper a new method is presented that makes it possible to interleave the topology of an isolated low-cost low-size rectifier in which the DC link capacitor of power factor correction stage and DC-DC stage inductor are eliminated and as result it is shown that all the benefits of interleaving such as low current ripple and higher power density are combined with the... 

A megawatt-range short pulse generator based on the diode step recovery phenomenon and the Marx generator idea is presented. This generator utilizes both opening and closing switches in one circuit. The proposed circuit is compact, light, and low cost and is driven by a low-power source. By using a three-stage Marx generator, the output peak power of 0.6 MW was obtained. The dimensions of the generator are 8 cm $ imes8$ cm. Experimental measurements of the output pulse characteristics showed a rise time of 100 ns for a 16- $Omega $ load. The input peak power was 4 W which showed more than 105 times increase in the pulse peak power. © 1973-2012 IEEE  

This paper presents a quadrature-clock generator based on a novel low-power ring oscillator with a wide frequency tuning range and low temperature variations. The proposed ring oscillator consists of two differential delay cells with a new controllable capacitive load of an MOS transistor. The wide tuning range is achieved due to transistor utilization in different regions and considering its resistance not to narrow down the frequency range. Delay cells are biased with a minimum possible value of a proportion to absolute temperature current to decrease frequency variations to temperature while the power consumption is kept low. The validation of the proposed methods is proved by circuit... 

We present a nonlinear geometric approach to fault detection and isolation (FDI) in a grid-connected inverter system. Open-switch faults in inverter power transistors together with faults in grid voltages and source current sensors are detected and isolated in the presence of disturbance. The detection process is based on dynamic model of an inverter, including a dc-bus capacitor and an output RL filter. The proposed FDI system does not rely on balanced or zero-sum conditions in the grid point and is functional under nonsinusoidal voltages and currents. IEEE  

This article describes the development of an 18 kV, 30 kW power supply for a pulsed current load with the maximum current of 20 A and a di/dt equal to 100 A/μs. The achieved output ripple is less than 0.01%. In such a high level of precision, the most important issues are considerable difference between the instantaneous and average output powers, as well as insufficient reaction speed of the converter to the fast load change. Very low level of the voltage feedback and its sensitivity to the noise. The first issue necessitates a notable overdesign of the converter switches if the output voltage precision is dedicated to the converter. The second issue raises the problems relevant to... 

Limitations in operation of analog switches at very low voltages have caused many problems in design of these types of switched capacitor circuits and data converters. In this paper by modifying a recently proposed clock boosting circuit, we could obtain a new structure with better performance for very low voltage circuits. This method requires simpler digital circuits in comparison with previously reported structures, as well as less number of transistors and smaller chip area. This method can be used for sampling the full swing signals with supply voltages as low as 0.4 volt. © 2008 IEEE  

In this paper a general method for system level prediction of INL in pipeline analog to digital converters is presented. For each stage of the ADC, a new error model consisting of an input referred gain error and a nonlinear term is introduced. An analytic method to calculate INL from all error sources is presented. INL model for a switched-capacitor implementation is also presented. ©2006 IEEE  

Due to deregulation and restructuring in many countries, it is expected that the amount of small-scale generations connected to the distribution networks will increase. So, it is necessary that the impact of these kinds of generators on Volt/Var control should be investigated. This paper presents a new approach to Volt/Var control in distribution systems with Distributed Generation (DG). It has been shown that DG can improve the entire performance of a network system, by means of better control and decreasing losses. In this approach, the Genetic Algorithm (GA) has been used as the optimization method, where the amount of DG and its controlling parameters, the voltage regulators situation,... 

In this paper, we present a study on the contribution of silicon nanocrystals to the electrical transport characteristics of large (100 μm × 100 μm) and small (100 nm × 100 nm) metal-oxide-semiconductor (MOS) capacitors at room temperature. A layer of silicon nanocrystals is synthesized within the oxide of these capacitors by ultra-low energy ion implantation and annealing. Several features including negative differential resistance (NDR), sharp current peaks and random telegraph signal (RTS) are demonstrated in the current-voltage and current-time characteristics of these capacitors. These features have been associated to charge storage in silicon nanocrystals and to the resulting Coulomb... 

In this article, we present the room-temperature current-voltage characteristics of a nanometer scale (100×100 nm2) metal-oxide-semiconductor capacitor containing few (less than 100) silicon nanoparticles. The layer of silicon nanoparticles is synthesized within the oxide of this capacitor by ultra low-energy ion implantation and annealing. Current fluctuations in the form of discrete current steps and sharp peaks appeared in the static and dynamic I (V) characteristics of the capacitor. These features have been associated to quantized charging and discharging of the nanoparticles and the resulting Coulomb interaction to the tunneling current. © 2005 American Institute of Physics  

Capacitor placement/setting is one of the main means for loss reduction and voltage profile improvement in distribution systems. If capacitor placement is meant, the objective function will be the cost of energy losses besides the capacitors costs in a specified period of time. Here, reconfiguration can be used as a strategy to reform the base configuration of the distribution network in order to place the capacitors more efficiently with lower costs. On the other hand, if capacitors are already available in a network, optimum capacitors setting and network reconfiguration should be performed for power loss minimization. In this paper both power loss minimization and capacitor placement cost... 

A multi-band frequency synthesizer for In-phase and Quadrature (I/Q) LO signal generation in Digital TV tuners is presented. Using divisor numbers other than powers of 2 (2 n ) for quadrature generation, reduces the required frequency range of the VCO, hence the number of VCO circuits, in multi-band frequency synthesizers. In the proposed synthesizer, VHF, UHF and L-band frequencies are covered with only one VCO. This is achieved by using a novel divide-by-3 circuit which produces precise I/Q LO signals. The VCO tuning range in this design is 2,400-3,632 MHz which is covered by a 6-bit switched-capacitor bank. A fast adaptive frequency calibration block selects the closest VCO frequency to... 

Failure statistics of most utilities indicate that distribution systems make the greatest individual contribution to the unavailability of supply to customers. Optimal capacitor placement in distribution systems has a number of advantages such as reducing losses, improving voltage profile, improving power factor and so on. The conventional objective function of the optimal capacitor placement consists of the total cost of losses and investments. Since capacitors supply reactive loads locally, they improve the load-carrying capability of the lines and therefore play the same role as redundant lines. Thus, optimal capacitor placement can also improve the reliability indices of a distribution...