Sharif Digital Repository

The In-Situ Combustion (ISC) as a thermal EOR process has been studied deeply in heavy oil reservoirs and is a promising method for certain non-fractured sandstones. However, its feasibility in fractured carbonates remained questionable. The aim of the present work was to understand the recovery mechanisms of ISC in fractured models and to evaluate the effect of fractures geometrical properties such as orientation, density, location and networking on the ISC recovery performance. Combustion parameters of a fractured low permeable carbonate heavy oil reservoir in Middle East called KEM; applied to simulation study. Simulator has been validated with KEM combustion tube experimental data and... 

Nickel modified graphite electrodes (G/Ni) prepared by galvanostatic deposition were examined for their redox process and electrocatalytic activities towards the oxidation of methanol, ethanol, 1-propanol and 2-propanol in alkaline solutions. The methods of cyclic voltammetry (CV), chronoamperometry (CA) and impedance spectroscopy (EIS) were employed. In CV studies, the electrochemical response, peak current varied in the order of MeOH > EtOH > 1-PrOH > 2-PrOH. Under the CA regime, a higher catalytic rate constant obtained for methanol oxidation was in agreement with CV measurements. Lower charge transfer resistance was obtained for low carbon alcohols oxidation and significantly higher... 

Ni II-(N,N′-bis(2,4-dihydroxyacetophenone)-2, 2-dimethylpropandiimine (Ni II{salnptn(4-OH) 2}) complex has been encapsulated within the supercage of zeolite-NaY by reacting Ni 2+-exchanged NaY with the flexible Schiff-base ligand that diffuses into the cavities. The encapsulated complex is characterized by EDX, scanning electron microscopy, powder X-ray diffraction, FT-IR, and cyclic voltammetry studies. Density functional calculation is being carried out on both the free nickel Schiff-base complex and that encapsulated in NaY zeolite to investigate changes in structural parameters, energies of the HOMO and LUMO, and absolute hardness and softness. Electrochemical properties of the NaY... 

In this paper, oil recovery and permeability reduction of a tight sandstone core sample in miscible CO2 flooding processes due to asphaltene deposition were studied using an Iranian bottom hole live oil sample in order to distinguish between the mechanical plugging and adsorption mechanisms of asphaltene involved in the interfacial interaction of the asphaltene/mineral rock system. A novel experimental method was designed and proposed to measure the amount of deposited asphaltene due to different mechanisms using the cyclohexane or toluene reverse flooding and spectrophotometer. In this work, the bottom hole live oil sample was injected first to a long core and then CO 2 injection was... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

In the current study, the hybrid effect of a corona discharge and γ-alumina supported Ni catalysts in CO 2 reforming of methane is investigated. The study includes both purely catalytic operation in the temperature range of 923-1023 K, and hybrid catalytic-plasma operation of DC corona discharge reactor at room temperature and ambient pressure. The effect of feed flow rate, discharge power and Ni/γ-Al 2O 3 catalysts are studied. When CH 4/CO 2 ratio in the feed is 1/2, the syngas of low H 2/CO ratio at about 0.56 is obtained, which is a potential feedstock for synthesis of liquid hydrocarbons. Although Ni catalyst is only active above 573 K, presence of Ni catalysts in the cold corona plasma... 

Hierarchical submicrometer TiO 2 hollow spheres with outer diameter of 300-700 nm and shell thickness of 200 nm are synthesized by liquid phase deposition of TiO 2 over carbon microspheres as sacrificial templates. The final TiO 2 hollow spheres are applied as a scattering layer on top of a transparent nanocrystalline TiO 2 film, serving as the photoanode of a dye-sensitized solar cell (DSC). In addition to efficient light scattering, the mesoporous structure of TiO 2 hollow spheres provides a high surface area, 74 m 2/g, which allows for higher dye loading. This dual functioning suggests that TiO 2 hollow spheres may be good replacements for conventional TiO 2 spheres as scatterers in DSCs.... 

In this experimental study, a kinetic model has been developed for Fischer-Tropsch synthesis reactions by using sol-gel technique and Fe/Ni/Al 2O 3 as the catalyst (40% Fe/60% Ni/40 wt.%Al 2O 3) in a differential fixed-bed micro reactor assuming no internal or external diffusion. Operating conditions of the reactor were as follows: total pressure 1-12 atm; Temperature 220-260 °C; H 2/CO feed ratio 1.5-2; gas hourly space velocity 2100-7000 cm 3(STP)/h/ g cat and conversions of 6-37% of hydrogen and 7-21% of carbon monoxide. Mass transfer limitations were investigated by changing synthesis gas velocity in reactors which differ in size. Based on the hypothesis that water inhibits the intrinsic... 

Cobalt is the most common binder in cemented carbides industry. However, there are some interests in use of alternatives. The similarity in properties has made nickel the first choice. In the present work, the effect of initial composition on modern hardmetals containing transition metal carbides/carbonitrides that are called "cemented carbonitrides" with nickel as binder was investigated. Change in quantity of additive carbides and tungsten to carbon (C/W) weight ratio through applying metallic tungsten powder in primary powder mixture had some effects on final hardness, transverse rupture strength, and microstructure of studied alloys. Addition of vanadium carbide not more than 0.2 wt.%,... 

Functionally graded cemented carbonitrides (FGCCs) are applied in cutting tools industry. Indexable inserts made from mentioned alloys have superior cutting performance and tool life thanks the formation of a surface modified layer with enhanced properties as well as crater wear resistance. Cemented carbonitrides are made of hard carbide/nitride/carbonitride particles that have been embedded in a metallic binder. Excellent wetting ability of tungsten carbide with cobalt has made this metal the first choice as binder. However, cobalt has high cost and environmental pollution impacts. Substitution of cobalt with other metals has always been figured out. Some other metals that have been used as... 

A new method has been employed in this research that optimizes a power generation system by maximizing the first and second law efficiencies and minimizing the entropy generation. Mass flow rates of pollutants and related external social cost of air pollution have been considered in estimating the electricity production cost. The effects of regenerative and CHP heat exchangers on power production, efficiencies, and production cost have been evaluated. The results show that a single regenerative heat exchanger lowers NOx, CO, and CO 2 emissions by 15%, 40%, and 0.4%, respectively, and decreases the electricity production cost by nearly 18%. A single CHP heat exchanger has little influence on... 

Today, the interest on distributed generation has been increasing, especially due to technical development on generation systems that meet environmental and energy policy concerns. One of the most important distributed energy technologies is Combined Heat and Power (CHP). CHP is small and self-contained electric generation plan that can provide power for household applications, commercial or industrial facilities and hence its applications are overtly increasing. It can reduce power loss and enhance service reliability in distribution systems. One of the influential factors for the users is the purchasing cost of CHP which is largely dependent on its type, capacity and efficiency. Therefore... 

The newly developed multiphase transformation-induced plasticity (TRIP) steels are of interest for industrial applications because of their excellent combination of high strength and ductility. Their performance can be successfully controlled by designing an optimum balance in the volume fractions of ferrite, bainite and retained austenite. The characteristics of the retained austenite are considered to be the main key to achieving the desired final properties. Against this background, the effects of retained austenite characteristics, such as volume fraction, carbon concentration, size and shape, on the behaviour of TRIP steels have been studied. The crystallographic orientation of the... 

The solubility of sulfur dioxide (SO2) and carbon dioxide (CO2) at P = 1 bar in a series of imidazolium-based room-temperature ionic liquids (RTILs) is calculated by Monte Carlo simulation in NPT ensemble using the OPLS-UA force field and Widom particle insertion method. The studied ILs were 1-butyl-3-methylimidazolium ([bmim]+) tetrafluoroborate ([BF4]-), [bmim]+ hexafluorophosphate ([PF 6]-), [bmim]+ bromide ([Br]-), [bmim]+ nitrate ([NO3]-), [bmim]+ bis-(trifluoromethyl) sulfonylimide ([Tf2N]-), and 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF4]). To validate the simulations, the liquid density of studied ILs and the solubility of CO2 in [bmim][PF6] was compared with... 

Iron oxide nanoparticles, γ-Fe2O3NP, were deposited onto the surface of multi-walled carbon nanotubes and CNT/γ-Fe2O3NP hybrid nanomaterials were obtained. Then linear-dendritic ABA type block copolymers consisting of polyethylene glycol as B block and poly(citric acid) as A block, PCA-PEG-PCA, were synthesized and cisplatin (cis-diamminedichloroplatinum (CDDP) - a platinum-based chemotherapy drug) was conjugated with their carboxyl functional groups and CDDP/PCA-PEG-PCA anticancer prodrugs were prepared. Noncovalent interactions between CDDP/PCA-PEG-PCA anticancer prodrugs and CNT/γ-Fe2O3NP hybrid nanomaterials led to CDDP/PCA-PEG-PCA/CNT/γ-Fe2O3NP drug delivery systems. There are several... 

Today, the interest on distributed generation has been increasing, especially due to technical development on generation systems that meet environmental and energy policy concerns. One of the most important distributed energy technologies is Combined Heat and Power (CHP). CHP is small and self-contained electric generation plan that can provide power for household applications, commercial or industrial facilities and hence its applications are overtly increasing. It can reduce power loss and enhance service reliability in distribution systems. One of the influential factors for the users is the purchasing cost of CHP which is largely dependent on its type, capacity and efficiency. Therefore... 

In the present work we studied the use of a membrane contactor system for simultaneous absorption of H2S and CO2 from a gas mixture similar to natural gas. MDEA solution and mixtures of MDEA/DEA and MDEA/MEA were used as absorbent liquid. PVDF and PSf hollow fiber membranes were used in the membrane contactor modules. Design of experiments were carried out by Taguchi method in a manner that a systematical investigation of the effect of operational parameters (temperature, pressure, gas and liquid flow rates, absorbent concentration and acid gas content of the feed), in addition to the effect of membrane material and absorbent liquid, was implemented on process performance parameters... 

Today, the interest on distributed generation has been increasing, especially due to technical development on generation systems that meet environmental and energy policy concerns. One of the most important distributed energy technologies is Combined Heat and Power (CHP). CHP is small and self-contained electric generation plan that can provide power for household applications, commercial or industrial facilities and hence its applications are overtly increasing. It can reduce power loss and enhance service reliability in distribution systems. One of the influential factors for the users is the purchasing cost of CHP which is largely dependent on its type, capacity and efficiency. Therefore... 

A polymeric manganese(II) complex with the general formula [Mn(O 2CCH2NH2CH2CO2) 2(H2O)2]n from reaction of iminodiacetatic acid and manganese(II) perchlorate under nitrogen in water, was synthesized and characterized. The structure of the complex was determined using single-crystal X-ray diffraction, elemental analysis, IR and UV-vis spectra. This complex exhibited excellent catalytic activity and selectivity for oxidation of various alcohols and sulfides to the corresponding aldehydes/ketone and sulfoxides using urea hydrogen peroxide and oxone (2KHSO 5·KHSO4·K2SO4), respectively, as oxidants under air at room temperature. The easy preparation, mild reaction conditions, high yields of the... 

Three distinct methods, namely, the spectral density, the multifractal random walk approach, and the multifractal detrended fluctuation analysis are utilized to study the properties of four distinct types of well logs from three oil and gas fields, namely, the natural gamma ray emission, neutron porosity, bulk density, and the sonic transient time logs. Such well logs have never been analyzed by the methods that we utilize in the present study. The results indicate that the well logs exhibit multifractal characteristics, and the estimated Hurst exponents by the three methods are close to each other. Using multifractal detrended fluctuation analysis and the shuffled and surrogated data, we...