Sharif Digital Repository

UF6 gas flow in the total regions of a rotor with the radius of 0.1 m and the length of 1 m in axisymmetric and steady states was simulated using a new hybrid CFD-DSMC method in the OpenFOAM framework. Implicit coupled density-based scheme was performed for CFD method, and Variable Hard Sphere (VHS) and diffuse model were employed in DSMC method. Also, as an initial estimation, the local Knudsen number was applied to determine the interface location between the continuum-rarefied regions (r = 0.0855 m). Then it was modified (r = 0.084 m) to reduce the computational cost. The comparison results of pure CFD and CFD-DSMC methods illustrated that there were large differences between the flow... 

In this contribution we have developed a collagen-based highly porous hydrogel by neutralizing the grafted poly(acrylamide-co-acrylic acid) after gel formation. Preparation of the hydrogels involved free radical polymerization of a combination of hydrolyzed collagen, acrylic acid (AA), acrylamide (AAm) and distilled water, in appropriate amounts and contained a crosslinking agent called N,N′-methylene bisacrylamide (MBA). The chemical structure of the hydrogels was characterized by means of FTIR spectroscopy, DSC and TGA thermal methods. Morphology of the samples was examined by scanning electron microscopy (SEM). Systematically, the certain variables of the graft copolymerization were... 

Liquefaction phenomenon is usually accompanied by large amounts of settlement owing to disruption of soil structure. In addition to that, large settlement also occurs by a significant increase in soil permeability during seismic excitation. To properly simulate the post-liquefaction settlement, it is important to take the compressibility properties of the liquefied sand as well as the permeability increase into account. Using initial permeability coefficient in the course of simulation of liquefaction leads to underestimation of settlement. In addition to that, using unrealistic values for permeability may cause erroneous predictions of other aspects of soil behavior. Therefore, an accurate... 

In this paper, a fully coupled three-dimensional dynamic analysis is carried out to investigate the dynamic behavior of pile foundations in liquefied ground. A critical state bounding surface plasticity model is used to model soil skeleton, while a fully coupled (u- P) formulation is employed to analyze soil displacements and pore water pressures. Furthermore, in this study, variation of permeability coefficient during liquefaction is taken into account; the permeability coefficient is related to excess pore water pressure ratio. Results of a centrifuge test on pile foundations are used to demonstrate the capability of the model for reliable analysis of piles under dynamic loading. Then, the... 

Aiming at improving efficiency in combustion systems, the study on droplet behavior and its trajectory is of crucial importance. Vortex engine is a kind of internal combustion engine which uses swirl flow to achieve higher combustion efficiency. One of the important advantages of designing vortex engine is to reduce the temperature of walls by confining the combustion products in the inner vortex. The scopes of this investigation are to study vortex engine flow field as well as effective parameters on fuel droplet behavior such as droplet diameter, droplet initial velocity and inlet velocity of the flow field. The flow field is simulated using Reynolds Stress Transport Model (RSM). The... 

This article presents a process of numerically predicting and experimentally verifying the dispersion quality and penetration level of fuel particles entering and moving in various directions relative to vortex engine walls. If the length scale of particles considered in this study is not comparable to the chamber length and, furthermore, the density is ignored, the effect of the particle on the flow field can be neglected and a one-way solution will be viable for the problem. The solutions in each case are carried out to estimate the particle trajectory and parameters affecting it. The governing equations are converted to a set of nonlinear, coupled, ordinary differential equations (ODEs)... 

In this paper axial and torsional vibrations of a drillstring are studied using cylindrical superelement. Drillstring vibration equation is derived by calculating kinetic and potential energy and work done by external forces on drillstring, and utilizing Hamilton's principle. The model is analyzed by implementing finite element technique with consideration drillstring weight, centrifugal force due to rotation of drillstring, axial force resulting from bit with the formation contact and torsional torque caused by the stick-slip phenomenon. To calculate the vibrational response of drillstring, a computational finite element scheme was developed. For a typical case of oil well drillstring, the... 

In this article, the effects of volute cross section shape and centroid profile of a radial ow compressor volute were investigated. The performance characteristics of a turbocharger compressor were obtained experimentally by measuring rotor speed and ow parameters at the inlet and outlet of the compressor. The three-dimensional ow field model of the compressor was obtained numerically solving Navier-Stokes equations with SST turbulence model. The compressor characteristic curves were plotted. For model verification, the results were compared with experimental data, showing good agreement. Modification of a volute was performed by introducing a shape factor for volute cross section geometry.... 

In order to evaluate the long-term viability, the iron content stability, and the labeling efficiency of mammalian cells using magnetic cell labeling; dextran-coated ultrasmall superparamagnetic iron oxide (USPIOs) nanoparticles with plain surfaces having a hydrodynamic size of 25 nm were used for this study. Tests were carried out in four groups each containing 5 flasks of 5.5 × 10 6 AD-293 embryonic kidney cells. The cell lines were incubated for 24 h using four different iron concentrations with and without protamine sulfate (Pro), washed with phosphate-buffered saline (PBS) and centrifuged three times to remove the unbounded USPIOs. Cell viability was also verified using USPIOs. There... 

In compressor design, it is necessary to simulate the compressor before manufacturing and performing experimental studies. One of the most efficient and common modeling methods is zero D analysis using scaling method with constant coefficients. Although it is efficient in the vicinity of the design point, its results are not acceptable in the off design points due to the growing error by getting away from design points. In this research, a novel zero D analysis method is developed predict accurately the compressor performance not only in the design point but also in the off design pint. In this method, variable coefficients are used instead of constant coefficients, which are obtained based... 

Development of hardware and CFD codes, especially in turbulence model and optimization of numerical codes has led to increment in usage of CFD which is capable of simulating different experimental situations take place at laboratory. Particularly in issues related to turbo machinery, twodimensional test of blades, three-dimensional investigation of different stages and studying the effect of different parameters are very costly. By means of CFD modeling all these issues are accessible. Actual flow within the compressor is three dimensional and fully turbulent due to geometry complexity, flow velocity and viscosity. For this reason it has become more and more popular to perform 3D numerical... 

Abstract Lateral Spreading, which usually occurs as a consequence of liquefaction in gently sloped loose saturated sand layers, is known to be a major source of earthquake-induced damages to structures such as quay walls, bridge piers, pipelines, and highway/railways. Therefore evaluation of the liquefaction potential and using appropriate methods for prediction of the adverse consequences of lateral spreading is of great importance. In this study, numerical modeling has been used to study lateral spreading phenomenon behind rigid waterfront structures. Coupled dynamic field equations of the extended Biot's theory with u-P formulation are used for simulating the phenomenon. A fully coupled... 

The development of inexpensive, equipment-free, portable, and user/environmentally-friendly analytical devices that can be efficiently utilized for on-site detection of PA is still a great challenge. To address these unmet demands, we have developed a smartphone-based disposable sensing bioplatform through immobilization of chlorophyll in a cotton thread for fluorescent monitoring of picric acid (PA). The fluorescence quenching of chlorophyll upon increasing the PA concentration based on the inner filter effect was considered as the sensing strategy in the developed sensor. The fabricated thread-based microfluidic sensing bioplatform was further coupled with a compact, low cost, portable,...