Sharif Digital Repository

Pr and Co co-doped BiFeO3 multiferroics of the following composition BiCoxPrxFe1-2xO3, where (x = 0.00, 0.05, 0.10, 0.15, 0.20 and 0.25) were prepared via sol-gel route. XRD, FTIR, SEM, VSM and VNA were used to evaluate the structural, phase, morphological and electromagnetic properties of Pr and Co co-doped multiferroics. All the undoped and Pr–Co co-doped multiferroics were of single rhombohedral phased whereas at higher concentration the orthorhombic structure was present. FTIR analysis exhibited the presence of orthorhombic phase. SEM images revealed that the grains of Pr and Co doped multiferroics are circular and elliptical in shape. Dielectric and electromagnetic properties were... 

Currently, materials with outstanding absorption abilities, such as thin size, better absorbing power, and light weight are the need of industry to resolve the electromagnetic issues. However, the research on optimizing the composition of the material, microstructure and the structure of the absorber are also the important factors for enhancing the absorption features. A metamaterial microwave absorber (MMA) based on nano ferrites with desirable absorption peaks is proposed and simulated. Sol-gel auto combustion route is used to prepare the nanosized Sm doped Co ferrite with Co1+xSmxFe2-2xO4 at x = 0.00, 0.03, 0.06, 0.09, respectively. XRD, VSM, FESEM, and VNA were employed to evaluate the... 

In this work, we have studied single-texture formation of CoSi2 layer in heat-treated Co/Ta0.7W0.3/Si(100) structure. Moreover, self-encapsulation process of the CoSi2 layer and surface roughness of the encapsulated layer, as a contact layer, has been examined. A direct current magnetron co-sputtering technique was employed to deposit a 10 nm Ta0.7W0.3 alloy intermediate layer. After growth of the layer on the Si substrate, a 25 nm Co layer was deposited using thermal evaporation method. Post-annealing process of the films was treated in an N2(80%) + H2(20%) ambient in a temperature range from 400 to 1000 °C for 60 min. X-ray diffraction analysis showed that a single-texture CoSi2 layer with... 

Epitaxial formation of CoSi2 nanolayer by solid state reaction of Co-Si in refractory metal intermediate-layer and cap-layer systems was investigated. Thin films of Ta and W, as the refractory metal intermediate or cap layers of the Co film, were deposited on Si(100) substrate and then heat-treated. The both interlayers resulted in formation of epitaxial CoSi 2 with (100) crystallographic orientation at 900°C. However, in the Ta intermediated system, the grown CoSi2 layer was thermally unstable at 1000°C, unlike the W system with a stable silicide layer. We found that use of W cap-layer cannot yield an epitaxial CoSi2 phase. But, a Ta cap-layer resulted in formation of epitaxial CoSi2(100)... 

In this investigation, the crystalline structure of a nanometric CoSi 2 layer, formed in heat treated Co/W x Ta (1-x) /Si(1 0 0) systems, has been studied by XRD analysis. Careful measurements of the diffraction intensities revealed that temporary formation of a metastable diamond cubic structure of CoSi 2 phase, rather than its usual CaF 2 structure, was occurred. It has been shown that formation of this metastable structure depends on the kind of the applied interlayer in addition to the annealing temperature. Among the studied systems with x = 0, 0.25, 0.5, 0.75 and 1, the second and the last systems resulted in growing a (1 0 0) single-texture CoSi 2 layer with the preferred usual CaF 2... 

In this paper we study graphs all of whose star sets induce cliques or co-cliques. We show that the star sets of every tree for each eigenvalue are independent sets. Among other results it is shown that each star set of a connected graph G with three distinct eigenvalues induces a clique if and only if G = K1, 2 or K2, ..., 2. It is also proved that stars are the only graphs with three distinct eigenvalues having a star partition with independent star sets. © 2008 Elsevier Inc. All rights reserved  

In the present investigation, different agricultural solid wastes namely: eggplant hull (EH), almond green hull (AGH), and walnut shell (WS), that are introduced as low cost adsorbents, were used for the removal of heavy metals (cobalt, strontium and mercury ions) from aqueous solutions. Activation process and/or chemical treatments using H 2O 2 and NH 3 were performed on these raw materials to increase their adsorption performances. The effectiveness of these adsorbents was studied in batch adsorption mode under a variety of experimental conditions such as: different chemical treatments, various amounts of adsorbents, initial metal-ion concentrations, pH of solutions, contact times, and... 

Aromatic and cyclic organic compounds such as nitrobenzene (NB) are widely used in various industries and are present in their wastewater. In addition, the photocatalytic process has received considerable attention due to its lower chemical consumption and more efficient degradation of refractory pollutants. In this study, a CoFe2O4-ZnO (CFZ) composite was prepared and evaluated its efficiency in the degradation of NB from aqueous solution under UV light. The optical, structural, and physicochemical properties of catalysts were characterized using PL, UV–vis DRS, XRD, TEM, FESEM-EDS, and VSM techniques and then discussed in detail. It was found that not only does the use of CF facilitate the... 

The MgO-supported Fe-Co-Mn catalysts, prepared using co-precipitation procedure, were tested for production of light olefins via CO hydrogenation reaction. The effect of a range of drying conditions including drying temperature and drying time on the structure and catalytic performance of Fe-Co-Mn/MgO catalyst for Fischer-Tropsch synthesis was investigated in a fixed bed micro-reactor under the same operational conditions of T = 350 °C, P = 1 bar, H2/CO = 2/1, and GHSV = 4500 h-1. It was found that the catalyst dried at 120 °C for 16 h has shown the best catalytic performance for CO hydrogenation. Furthermore, the effect of drying conditions on different surface reaction rates was also... 

To attain superior energy density concurrently with high power density, high-performance supercapacitors have been developed. Herein an innovative strategy has been adopted to fabricate unique binder-free electrodes composed of a unique porous structure of binary metal carbonate hydroxide nanomace-decorated hydrothermal porous carbon spheres (PCSs). Hierarchical nickel-cobalt carbonate hydroxide (NiCOCH) nanomaces, directly grown on PCSs, are used as positive electrodes for supercapacitors fabrication. Furthermore, Fe2O3@PCS composites, having benefits of highly reversible redox reaction in the negative potential window and highly porous structure, are employed as the negative electrode in... 

To attain superior energy density concurrently with high power density, high-performance supercapacitors have been developed. Herein an innovative strategy has been adopted to fabricate unique binder-free electrodes composed of a unique porous structure of binary metal carbonate hydroxide nanomace-decorated hydrothermal porous carbon spheres (PCSs). Hierarchical nickel-cobalt carbonate hydroxide (NiCOCH) nanomaces, directly grown on PCSs, are used as positive electrodes for supercapacitors fabrication. Furthermore, Fe2O3@PCS composites, having benefits of highly reversible redox reaction in the negative potential window and highly porous structure, are employed as the negative electrode in... 

WC-Co cemented carbides, including small angular tungsten carbides particles, are used extensively to improve wear resistance. Some additives can affect mechanical and wear properties of these materials. In this study, the effect of VC and (Ta, Nb)C content on wear of WC- 10Co were considered. The tests were performed at normal load of 230 N and sliding distance of 800 m up to 3200 m. Wear tests were carried out using dry sand/rubber wheel apparatus. Wear rate, standard and modified wear coefficients were calculated. The microstructures of prepared specimens were examined by optical microscopy. The morphological analysis of the worn surfaces was made by SEM. The results show that VC content...