Sharif Digital Repository

Cobalt is the most common binder in cemented carbides industry. However, there are some interests in use of alternatives. The similarity in properties has made nickel the first choice. In the present work, the effect of initial composition on modern hardmetals containing transition metal carbides/carbonitrides that are called "cemented carbonitrides" with nickel as binder was investigated. Change in quantity of additive carbides and tungsten to carbon (C/W) weight ratio through applying metallic tungsten powder in primary powder mixture had some effects on final hardness, transverse rupture strength, and microstructure of studied alloys. Addition of vanadium carbide not more than 0.2 wt.%,... 

In the present paper, numerical simulation of thermal barrier coating system under thermo-mechanical loadings is performed, using the finite element method in ABAQUS software. The base material is Aluminum-silicon alloy, A356.0 which is widely used in automotive components such as diesel engine cylinder heads. Thermal barrier coatings (TBCs) are applied to combustion chamber in order to reduce fuel consumption and pollutions and also improve fatigue life of components. The roughness effect of coating layers on stress distribution of test specimens is investigated. Semi-ellipsoid roughness of the interfaces between substrate/bond coat and bond coat/top coat are simulated to get the stress... 

A new broadband frequency discriminator is introduced for demodulating the frequency modulated signals in the microwave frequency range. Direct demodulation with no need for tuning the center frequency of the resonance circuits is the most important advantage of the proposed technique. This technique uses the in-phase/quadrature demodulation, in some manner, without using any additional local oscillator for down conversion. Simulation of the proposed demodulator has been done with Advanced Design System software to evaluate and predict the system behavior. A setup based on the proposed method was designed and implemented in order to verify the accuracy of the theory. We tested the proposed... 

In this work, thermo-mechanical behavior and microstructural evolution in similar and dissimilar friction stir welding of AA6061-T6 and AA5086-O have been investigated. Firstly, the thermo-mechanical behaviors of materials during similar and dissimilar FSW operations have been predicted using three-dimensional finite element software, ABAQUS, then, the mechanical properties and the developed microstructures within the welded samples have been studied with the aid of experimental observations and model predictions. It is found that different strengthening mechanisms in AA5086 and AA6061 result in complex behaviors in hardness of the welded cross section where the hardness variation in similar... 

The Failure Modes and Effects Analysis (FMEA) method has been used to study the reliability of many different power generation systems. This paper now applies that method to a wind turbine (WT) system using a proprietary software reliability analysis tool. Comparison is made between the quantitative results of an FMEA and reliability field data from real wind turbine systems and their assemblies. These results are discussed to establish relationships which are useful for future wind turbine designs. The main system studied is an existing design 2 MW wind turbine with a Doubly Fed Induction Generator (DFIG), which is then compared with a hypothetical wind turbine system using the Brushless... 

In order to achieve the international climate goals and to keep the global temperature increase below 2 °C, carbon capture and storage in large point sources of CO2 emissions has received considerable attention. In recent years, mitigation of CO2 emissions from the power sector has been studied extensively whereas other industrial point source emitters such as hydrogen industry have also great potential for CO2 abatement. This study aims to draw an updated comparison between different hydrogen and power cogeneration systems using natural gas and coal as feedstock. The goal is to show the relative advantage of cogeneration systems with respect to CO2 emission reduction costs. Accordingly, the... 

In drilling oil wells a system of complex fluids and chemical additives is used. Losses of these fluids in the well during drilling or disposal of them in well site could transfer pollutants to groundwater. In the present study a number of well sites, located in South of Iran, were studied to indicate types and magnitude of various pollutant materials that remain in the environment undestroyed and have considerable impacts on the underground water resources. Hydrocarbons used in Oil Base Muds (OBM) that can't be biodegrade readily in nature found to be the most severe pollutant material caused by disposal of Drilling Mud and Cuttings. Volume of drilling waste for these oil wells evaluated to... 

Application of immobilized horseradish peroxidase (HRP) in porous calcium alginate (ca-alginate) for the purpose of phenol removal is reported. The optimal conditions for immobilization of HRP in ca-alginate were identified. Gelation (encapsulation) was optimized at 1.0% (w/v) sodium alginate in the presence of 5.5% (w/v) of calcium chloride. Upon immobilization, pH profile of enzyme activity changes as it shows higher value at basic and acidic solution. Increasing initial phenol concentration results in a decrease in % conversion. The highest conversion belongs to phenol concentration of 2 mM. Investigation into time course of phenol removal for both encapsulated and free enzymes showed... 

Reinforced concrete slabs are common structural elements that could be exposed to impact loading. Although use of reinforced concrete slabs and utilization of Fiber Reinforced Polymer (FRP) as alternative to traditional steel reinforcement slabs are growing, but the influence of various parameters on their response under impact loads is not properly evaluated. This study investigated the effect of rebar's material, amount and arrangement of reinforcements, concrete strength and slab thickness on dynamic behavior of reinforced concrete slabs using both laboratory experiments and numerical simulations. Performance of fifteen 1000 × 1000 mm concrete slabs, including two 75 mm thick plain slabs,... 

Today, many students are study computer science. Although they study different courses, they rarely do homework or projects related to real world problems. In this paper, we design a project to show some of the problems which are occured during implementing a real word project to the students. In this project, the students are asked to implement the FFT (Fast Fourier Transform) algorithm on a personal computer and then port the program to a smartphone using J2ME (Java 2 Micro Edition) programming language. By doing this project, the undergraduate computer science students will become familiar with the limitations of small devices such as smartphones. They also learn the process of porting a... 

Network-on-Chips are now the popular communication medium to support inter-IP communications in complex on-chip systems with tens to hundreds IP cores. Higher scalability (compared to the traditional shared bus and point-to-point interconnects), throughput, and reliability are among the most important advantages of NoCs. Moreover, NoCs can well match current CAD methodologies mainly relying on modular and reusable structures with regularity of structural pattern. However, since NoCs are resource-limited, determining how to distribute application load over limited on-chip resources (e.g. switches, buffers, virtual channels, and wires) in order to improve the metrics of interest and satisfy... 

There are many sites specially designed for mobile phones. In cases such as the registering in websites, some hackers write programs to make automatic false enrolments which waste the resources of the website. Therefore, it is necessary to distinguish between human users and computer programs. These systems are known as CAPTCHA (Completely Automated Public Turing test to tell Computers and Human Apart). CAPTCHA methods are mainly based on the weak points of OCR (Optical Character Recognition) systems while using them difficult in tools such as PDAs (Personal Digital Assistant) or mobile phones that lack a big keyboard. So the Non-OCR-Based CAPTCHA methods are proposed which are do not need... 

Considering the dramatic increase of greenhouse gases concentration in the atmosphere, especially carbon dioxide, reduction of these gases seems necessary to combat global warming. Fossil fuel power plants are one of the main sources of CO2 emission and several methods are under development to capture CO2 from power plants. In this paper, CO2 capture from a natural gas fired steam cycle power plant using oxyfuel combustion technology is studied. Oxy-fuel combustion is an interesting option since CO2 concentration in the flue gas is highly increased. The Integrated Environmental Control Model (IECM) developed by Carnegie Mellon University (USA) is used to evaluate the effect of this capture...