Sharif Digital Repository

This paper presents closed loop simulation of a CMOS-MEMS force sensor for biomedical applications employing an optimal proportional-integral-derivative controller. Since the dynamic behavior of the sensor under investigation is nonlinear the iterative feedback tuning approach was proposed for optimal gains tuning of the proposed controller. Simulation results presented in this research illustrate that the proposed controller suppresses the undesired in-plane vibration induced by environment or gripper 40 times faster than the nonlinear controller proposed in the literature. To suppress the maximum input disturbance the maximum voltage was approximately 18 V which was less than the pull-in... 

This paper considers a closed-loop system consisting of a fractional/integer order system and a fractional PID controller. Assuming that the uncertain coefficients of the fractional PID controller lie in some known intervals independently (i.e. that controller is a member of an interval family), the paper presents some easy to use theorems to investigate the robust bounded-input bounded-output stability of the resultant closed-loop system. Moreover, a finite frequency bound required in drawing the related graphs has also been provided. Finally, some numerical examples are presented to illustrate the results  

Pre-compensators are used in multivariable control systems to reduce (or eliminate) open loop system interactions. Classical methods for the design of pre-compensator are traditionally based on static designs. Static pre-compensators are preferred for their simplicity, but are highly unsystematic in the amounts of achievable diagonal dominance. In many applications, only the more powerful dynamic pre-compensators are able to deliver the desired amounts of decoupling. This paper proposes a new method for the design of dynamic pre-compensators which is based on a Quadratic Programming (QP) optimization. Using the proposed approach the total pre-compensator is found through several smaller... 

Fractional order PI and PID controllers are the most common fractional order controllers used in practice. In this paper, a simple analytical method is proposed for tuning the parameters of these controllers. The proposed method is useful in designing fractional order PI and PID controllers for control of complicated fractional order systems. To achieve the goal, at first a reduction technique is presented for approximating complicated fractional order models. Then, based on the obtained reduced models some analytical rules are suggested to determine the parameters of fractional order PI and PID controllers. Finally, numerical results are given to show the efficiency of the proposed tuning... 

For a power transfer path, total transfer capability (TTC) represents maximum power that can be transferred over the transmission system. Unified power flow controller (UPFC) is a device that can be used to increase in TTC. This study presents a new method for optimal UPFC application to minimise power loss while enhancing TTC. Based on UPFC injection model, the solution region of UPFC parameters is first found using the proposed method to maximise TTC. It then searches the solution region to find optimal UPFC control mode and setting to minimise system power loss. The proposed method is applied to the IEEE-Reliability Test System and the UPFC application impact are evaluated. Comparative... 

During the past decade, Electro-Hydraulic system has performed a significant role in industrial engineering as an actuator for high performance and precision positioning applications. In this case, many control methods have been developed for an electro-hydraulic actuated clutch. In this paper a Linear Quadratic Regulators (LQR) is proposed to trajectory control of a wet clutch actuated by a hydraulic servo valve mechanism. Simulation study was performed using linearized mathematical model of the system implemented in MATLAB software. Based on the simulation results performance of the proposed controller was evaluated and discussed  

In [1] three theorems are presented which relate to the problem of stabilizing PID controller design for interval time-delay plants. We present a counterexample for these results  

Control Performance Assessment (CPA) and tuning of PID controllers are studied in this paper. We propose a framework for systematic analysis of the tradeoff between the structural complexity of the controller and its performance. As the measure of the controller performance, an LQG based index is used. The problem is augmented with an additional term which forces sparsity on the complexity of a decentralized PID controller. The desired complexity is controlled via a weighting parameter which determines the cost of each additional element (i.e., P, I, and D terms). The result is a decentralized multivariable PID controller in which the complexity of each loop controller is optimized such that... 

Control Performance Assessment (CPA) and tuning of PID controllers are studied in this paper. We propose a framework for systematic analysis of the tradeoff between the structural complexity of the controller and its performance. As the measure of the controller performance, an LQG based index is used. The problem is augmented with an additional term which forces sparsity on the complexity of a decentralized PID controller. The desired complexity is controlled via a weighting parameter which determines the cost of each additional element (i.e., P, I, and D terms). The result is a decentralized multivariable PID controller in which the complexity of each loop controller is optimized such that... 

The significant importance of micro-scaled devices in medicine, lab-on-a-chip, and etc resulted in a vast variety of researches. The idea behind the novel hydro magnetic micro-pump and flow controller is that ferromagnetic particles, mixed and dispersed in a carrier fluid, can be accumulated and retained at specific sites to form pistons in a micro-tube using some external magnetic field sources along the micro-tube. This external magnetic field is related to some solenoids, which are turned on and off alternatively. Depending upon dragging speed of these pistons, which itself is a function of switching time, this device can be used to either increase (pumping) or decrease (valving) the flow... 

Demand response (DR) and flexible AC transmission system (FACTS) devices can be effectively used for congestion management in power transmission systems. However, demand response program (DRP) implementation can itself affect the optimum location of FACTS devices, which is one of the main issues in power system planning. This paper investigates the impact of DRPs on unified power flow controller (UPFC) placement. The harmony search algorithm is employed to determine the optimum locations and parameter setting of UPFC in a long-term framework. The optimization problem is solved with different objectives including generation and congestion cost reduction, as well as loss reduction. In this... 

This paper presents a single-phase phase-locked loop (PLL) system which is primarily free from the double-frequency ripples from which the conventional PLL system suffers. The proposed PLL is then extended to reject the harmonic components from the input signal and to estimate the phase-angle and frequency of the distorted input signal with no error. Three units of the proposed PLL can be used in three-phase power systems, such as FACTS and HVDC converters, to estimate the phase-angles of the individual phases with no double-frequency ripples and without sensitivity to the presence of harmonics and inter-harmonics. This makes the proposed PLL unique and desirable for applications which... 

An approximated quadratic programming algorithm is proposed to determine a model predictive controller, which is applied to the scheduling problem. We name the algorithm Sub-optimal Model Predictive Control Scheduler (SMPCS). The SMPCS prepares a platform to guarantee end to end proportional delay in DiffServ architecture. This paper investigates the complication of SMPCS and its implementation problems in high speed routers. In order to efficiently implement the controller we admit sub-optimal results against reduction in the complexity of the optimizer. Simulation results show that the proposed approximation improves speed of the controller considerably. © Springer-Verlag Berlin Heidelberg... 

This paper develops a stability and performance preserving controller order reduction method for linear time-invariant continuous-time single-input, single-output systems. In this method, the error between the complementary sensitivity functions of the nominal closed-loop system and closed-loop system using the reduced-order controller is converted to a frequency-weighted error between the Youla parameters of the full-order and reduced-order controllers and then the H∞norm of this error, subject to a set of linear matrix inequality constraints, is minimized. The main ideas of order reduction and stability preservation are contained in the constraints of the optimization problem. However,... 

This paper presents a robust decentralized proportional-integral (PI) control design as a solution of the load frequency control (LFC) in a multi-area power system. In the proposed methodology, the system robustness margin and transient performance are optimized simultaneously to achieve the optimum PI controller parameters. The Kharitonov's theorem is used to determine the robustness margin, i.e., the maximal uncertainty bounds under which the stable performance of the power system is guaranteed. The integral time square error (ITSE) is applied to quantify the transient performance of the LFC system. In order to tune the PI gains, the control objective function is optimized using the... 

Objective: The objective of this paper is to develop a hierarchical two-level power system load frequency control. Design: At the button level, standard PI controllers are utilized to control area's frequency and tie-line power interchanges. At the higher layer, model predictive control (MPC) is employed as a supervisory controller to determine the optimal set-point for the PI controllers in the lower layer. The proposed supervisory predictive controller computes the optimal set-points such that to coordinate decentralized local controllers. Blocking and coincidence point technology is employed to alleviate the computational effort of the MPC. In order to achieve the best closed loop... 

Fermentation systems are often highly nonlinear, with poorly understood dynamic behaviour of the reactor. In this work, mathematical modeling of the fermentation process based on aeration rate control was performed in a semi-batch airlift loop bioreactor. The bioconversion of glucose to gluconic acid by the Aspergillus niger strain was considered in an oxygen consuming system in the liquid phase. The proper kinetic model for the bioconversion of glucose to gluconic acid was investigated using experimental data from a 40 dm3reactor. Kinetic parameter estimation was used from the literature. The model was validated by experimental data and was compared with the Monod kinetic model. The... 

In large-scale power systems, classical centralized control approaches may fail due to geographically distribution of information and decentralized controllers result in sub-optimal solution for load-frequency control (LFC) problems. In this paper, a two-level structure is presented to obtain optimal solution for LFC problems and also reduce the computational complexity of centralized controllers. In this approach, an interconnected multi-area power system is decomposed into several sub-systems (areas) at the first-level. Then an optimization problem in each area is solved separately, with respect to its local information and interaction signals coming from other areas. At the second-level,... 

In this paper, a wide area measurement, centralized, load frequency control using model predictive control (MPC) is presented for multi-area power systems. A multivariable constrained MPC was used to calculate optimal control actions including generation rate constraints. To alleviate computational effort and to reduce numerical problems, particularly in large prediction horizon, an exponentially weighted functional MPC was employed. Time-based simulation studies were performed on a three-area power system, and the results were then compared with decentralized MPC and classical PI controller. The results show that the proposed MPC scheme offers significantly better performance against load... 

When the network suffers from congestion, the core or edge routers signal the incidence of congestion through the active queue management (AQM) to the sources. The time-varying nature of the network dynamics and the complex process of retuning the current AQM algorithms for different operating points necessitate the development of a new AQM algorithm. Since the non-minimum phase characteristics of the network dynamics restrict direct application of the proportional-integral-derivative (PID) controller, we propose a compensated PID controller based on a new control strategy addressing the phase-lag and restrictions caused by the delay. Based on the unstable internal dynamics caused by the...