Sharif Digital Repository

Refrigerators have considerable share of residential consumption. They can be, however, flexible loads because their operating time and consumption patterns can be changed to some extent. Accordingly, they can be selected as a target for the study of Demand Side Management plans. In this paper, two experimental models for a refrigerator are derived. In obtaining the first model, following assumptions are made: the ambient temperature of refrigerator is assumed to be constant and the refrigerator door is remained closed. However, in the second model the variation of ambient temperature and door-opening effects are considered according to some general patterns. Further, two strategies are... 

Reducing the size of the technology increases leakage power in Network-on-Chip (NoC) routers drastically. Power-gating, particularly in NoC routers, is one of the most efficient approaches for alleviating the leakage power. Although applying power-gating techniques alleviates NoC power consumption due to high proportion of idleness in NoC routers, since the timing behavior of packets is irregular, even in low injection rates, performance overhead in power-gated routers is significant. In this paper, we present SMART, a Scalable Mapping And Routing Technique, with virtually no area overhead on the network. It improves the irregularity of the timing behavior of packets in order to mitigate... 

The sustainable design of the waste-management system is of crucial importance for cities like Tehran, capital of Iran. Tehran’s municipal solid-waste management has adopted modern practices and technologies very slowly. This study proposes the optimum pathway to reach maximum environmental benefits as well as the most cost-effective technologies according to the financial limits. The hybrid life cycle assessment (LCA)–emergy approach is applied to utilize the life cycle emissions as an inventory database to estimate the ecosystem services provided by the natural ecosystem to dilute the emissions and compensate raw material consumption. Among organic waste-treatment options, composting is... 

This paper discusses a technical comparison of a directexpansion ground-source heat pump (DX-GSHP) and an airsource heat pump (ASHP). To lower the ground heat exchanger size for cost reduction purposes, the system performance of a hybrid system is also evaluated using a supplementary air evaporator combined with the DX-GSHP. Detailed screening models previously developed for ASHPs and DX-GHSPs are first used to compare the seasonal performance of these two options for a residential building in the cold-climate city of Montreal, Canada. Then, the model is adopted for performance evaluation of the hybrid system. Additionally, different parameters including borehole total length and heat pump... 

Regarding the increasing number of electrical devices in the smart homes that leads to increase in total electricity consumption and cost, it is essential to use energy management methods to reduce the electricity cost. However, this can cause resident's dissatisfaction. Hence, it is important to define a method in which cost and dissatisfaction be optimized simultaneously. Among different services, an electric vehicle is the one that can be used as an energy storage system, so it can reduce the daily cost despite of increasing the total energy consumption. In this paper, we study the effect of the EV on the cost and dissatisfaction in our proposed method. © 2018 IEEE  

By increasing the penetration level of the combined heat and power systems and demand response programs between energy consumers in the distribution network, the interaction between electricity and the natural gas network becomes more complicated. This paper proposes a peer-to-peer (P2P) energy sharing scheme for energy trading among Smart Energy Hubs (S.E. Hubs) which can trade both electrical and thermal energy with each other to reduce their cost and, reduce their dependency to gas and electricity utility companies. A two-stage energy strategy is presented. In the first stage, the S.E. Hubs total social cost is reduced by finding the optimal energy sharing profiles. And, in the second... 

Recent development in memory technologies has introduced Spin-Transfer Torque Magnetic RAM (STT-MRAM) as the most promising replacement for SRAMs in on-chip cache memories. Besides its lower leakage power, higher density, immunity to radiation-induced particles, and non-volatility, an unintentional bit flip during read operation, referred to as read disturbance error, is a severe reliability challenge in STT-MRAM caches. One major source of read disturbance error in STT-MRAM caches is simultaneous accesses to all tags for parallel comparison operation in a cache set, which has not been addressed in previous work. This paper first demonstrates that high read accesses to tag arrays extremely... 

Recent development in memory technologies has introduced Spin-Transfer Torque Magnetic RAM (STT-MRAM) as the most promising replacement for SRAMs in on-chip cache memories. Besides its lower leakage power, higher density, immunity to radiation-induced particles, and non-volatility, an unintentional bit flip during read operation, referred to as read disturbance error, is a severe reliability challenge in STT-MRAM caches. One major source of read disturbance error in STT-MRAM caches is simultaneous accesses to all tags for parallel comparison operation in a cache set, which has not been addressed in previous work. This article first demonstrates that high read accesses to tag array extremely... 

The capability level of rotary as well as first generation drilling operation could not be matched for deeply drilling programs. To reach that deep, the increasing in drill string length could also cause an additional constraint on hydraulic performance. The operation of slim hole drilling has significant potential to reduce well costs. This cost might be savings are especially important with increased demand for reduced capital finance under current economic conditions in the Iranian oil and gas industry. This savings achievement could be caused by use of smaller drilling rigs, work over rigs, reduced casing size, reducing requirement for drilling consumables and other costs associated with... 

In the recent years, many universities invest on cubesats to prepare an appropriate environment for their students to get their hands on real experiments including design, fabrication, test, launch, operation and analysis of a real satellite project. Now after 5 years of experimentation, it is time for leaders to define more practical goals beside training students. Orienting the budget that is annually being invested on such satellites in every country to a specific goal could be a driving force in opening a new chapter in the utilization of pico-satellites and the advantages they offer. As these tiny satellites are utilized based on low cost COTS and also are light weight enough to reduce... 

Recently, there has been a growing attention in frequent itemset mining in distributed systems. In this paper, we present an algorithm to extract frequent itemsets from large distributed datasets. Our algorithm uses gossip as the communication mechanism and does not rely on any central node. In gossip based communication, nodes repeatedly select other random nodes in the system, and exchange information with them. Our algorithm proceeds in rounds and provides all nodes with the required support counts of itemsets, such that each node is able to extract the global frequent itemsets. For local iteration and generation of candidate itemsets, a trie data structure is used, which facilitates the... 

Spin-Transfer Torque Random Access Memories (STT-RAMs) are a promising alternative to SRAMs in on-chip caches. STT-RAMs face with a high error rate in write operations due to stochastic switching. To alleviate this problem, Error-Correcting Codes (ECCs) are commonly used, which results in a significant area and energy consumption overhead. This paper proposes an efficient technique, so-called Adaptive Way Allocation for Reconfigurable ECCs (AWARE), to correct write errors in STT-RAM caches. AWARE exploits the asymmetric error rate in cell switching directions, which leads to data-dependent write error rates, to reduce the ECC overheads without compromising the reliability of the cache. To... 

Spin-Transfer Torque Random Access Memories (STT-RAMs) are a promising alternative to SRAMs in on-chip caches. STT-RAMs face with a high error rate in write operations due to stochastic switching. To alleviate this problem, Error-Correcting Codes (ECCs) are commonly used, which results in a significant area and energy consumption overhead. This paper proposes an efficient technique, so-called Adaptive Way Allocation for Reconfigurable ECCs (AWARE), to correct write errors in STT-RAM caches. AWARE exploits the asymmetric error rate in cell switching directions, which leads to data-dependent write error rates, to reduce the ECC overheads without compromising the reliability of the cache. To... 

There are a vast number of cloud service providers, which offer virtual machines (VMs) with different configurations. From the companies perspective, an appropriate selection of VMs is an important issue, as the proper service selection leads to improved productivity, higher efficiency, and lower cost. An effective service selection cannot be done without a systematic approach due to the modularity of requests, the conflicts between requirements, and the impact of network parameters. In this paper, we introduce an innovative framework, called PCA, to solve service selection problem in the hybrid environment of peer-assisted, public, and private clouds. PCA detects the conflicts between the... 

There are a vast number of cloud service providers, which offer virtual machines (VMs) with different configurations. From the companies perspective, an appropriate selection of VMs is an important issue, as the proper service selection leads to improved productivity, higher efficiency, and lower cost. An effective service selection cannot be done without a systematic approach due to the modularity of requests, the conflicts between requirements, and the impact of network parameters. In this paper, we introduce an innovative framework, called PCA, to solve service selection problem in the hybrid environment of peer-assisted, public, and private clouds. PCA detects the conflicts between the... 

Coordinated operation of hydro-thermal power systems helps reduce generation costs. The Hydro-Thermal Coordinating Model (HTCOM) software package, as one of these models, determines long-term operational policies for a hydro-thermal power system with multipurpose reservoirs. The CLT was incorporated within this framework to ensure a logical time-based run-time, with no serious decrease in precision. HTCOM, based on both its theoretical background and its application in the KWPA system, has shown that it can handle real world problems successfully, with more reliable outcomes. Many models have also been developed to optimize the planning of hydro-thermal systems. HTCOM was developed and... 

All-flash storage (AFS) systems have become an essential infrastructure component to support enterprise applications, where sub-millisecond latency and very high throughput are required. Nevertheless, the price per capacity ofsolid-state drives (SSDs) is relatively high, which has encouraged system architects to adoptdata reduction techniques, mainlydeduplication andcompression, in enterprise storage solutions. To provide higher reliability and performance, SSDs are typically grouped usingredundant array of independent disk (RAID) configurations. Data reduction on top of RAID arrays, however, adds I/O overheads and also complicates the I/O patterns redirected to the underlying backend SSDs,...