Sharif Digital Repository

The concept of a nonlinear transfer function of a fibre-optic communication link is reviewed. Also an approximation of the nonlinear transfer function is introduced, which allows to define an equivalent single-span model of a dispersion-managed multi-span system. In this paper we will show its limits of validity and try to extent these limits by enhancing the theoretical model. In this respect we will discuss the impact of dispersion precompensation and show the influence of residual dispersion per span, number of spans and local dispersion on transmission systems with on-off keying and differential phase-shift keying modulation formats. This approach allows fast assessment of the... 

Pushing a fluid with a less viscous one gives rise to the well known Saffman-Taylor instability. This instability is important in a wide variety of applications involving strongly non-Newtonian fluids that often exhibit a yield stress. Here we investigate the Saffmann-Taylor instability in this type of fluid, in longitudinal flows in Hele-Shaw cells. In particular, we study Darcy's law for yield stress fluids. The dispersion equation for the flow is similar to the equations obtained for ordinary viscous fluids but the viscous terms in the dimensionless numbers conditioning the instability now contain the yield stress. This also has repercussions on the wavelength of the instability as it... 

The microstructure and mechanical properties of the ultra-fine grained (UFG) Al6063 alloy reinforced with nanometric aluminum oxide nanoparticles (25 nm) were investigated and compared with the coarse-grained (CG) Al6063 alloy (~2 μm). The UFG materials were prepared by mechanical alloying (MA) under high-purity Ar and Ar-5 vol pct O2 atmospheres followed by hot powder extrusion (HPE). The CG alloy was produced by HPE of the gas-atomized Al6063 powder without applying MA. Electron backscatter diffraction under scanning electron microscopy together with transmission electron microscopy studies revealed that the microstructure of the milled powders after HPE consisted of ultra-fine grains... 

In this paper, we examine fluid flow and associated dispersion around a circular cylinder under progressive surface wave motion. The flow field and vortex shedding patterns were studied using flow visualization and Particle Image Velocimetry (PIV). Several patterns of vortex shedding were identified around a single cylinder. The vortex shedding patterns under progressive wave motion are similar to those observed in planar oscillatory flow, except in the way the vortices form and in the orientation they take. The observed vortex patterns in progressive wave motion are more unstable than those in planar oscillatory flow. Using particle tracking and the Lagrangian dispersion method, the... 

In the present work, slip velocity has been measured in a 76 mm diameter pulsed disc and doughnut extraction column for four different liquid-liquid systems. The effects of operating variables including pulsation intensity and dispersed and continuous phase flow rates on slip velocity have been investigated. The existence of three different operational regimes, namely mixersettler, transition, and emulsion regimes, was observed when the energy input was changed. Empirical correlations are derived for prediction of the slip velocity in terms of operating variables, physical properties of the liquid systems, and column geometry for different regimes. Good agreement between prediction and... 

The characteristics of integrating distributed generation (DG) in a distribution network have changed. These electrical resources are used as an alternative energy source to the main grid. The technical and economical benefits of such units are achieved only when they are optimally sized and placed in the network. In this paper, a static mixed integer non-linear model for distributed generation planning is defined and solved using a modified NSGA method (Non-dominated Sorting Genetic Algorithm). Different DG technologies are considered and the objective functions for minimization are defined as the total active loss, investment and operational costs, and environmental pollution. The method... 

In this research mass transfer coefficient under jetting regime in different directions (from dispersed to continuous and continuous to dispersed phase) has been studied using an experimental setup. n-Butanol-succinic acid-water with low interfacial tension has been selected as experimental chemical system. The effects of various parameters such as jet velocity, nozzle diameter and the height of the continuous phase above the nozzle, on mass transfer coefficient have been investigated. A correlation has also been derived in order to predict the mass transfer coefficient as a function of physical properties of both phases and aforementioned parameters. Based on the experimental results, mass... 

The propagation of shear horizontal surface acoustic waves (SHSAWs) in an inhomogeneous magneto-electro-elastic (MEE) half-space with 6-mm symmetry is studied. By virtue of both the direct approach and Stroh-formalism, the dispersion relations corresponding to two general cases of material properties variation are obtained. In the first case, it is assumed that all material properties involving the MEE properties and density vary similarly in depth, whereas, the second case considers identical variation for the MEE properties, which differs from the variation of the density. The non-dispersive SHSAW velocities pertinent to the homogeneous MEE media are obtained under eight different surface... 

Turbulent Schmidt number as an important parameter in computational fluid dynamic (CFD) simulations is strongly dependent on height, whereas it is mostly considered to be constant in the literature. This paper presents a new variable turbulent Schmidt number formulation which can calculate the relative concentrations (RCs) in neutral atmospheric conditions more accurately. To achieve this aim, RCs from continuous releases are calculated in different distances by the analytical Gaussian plume mode. CFD simulations are carried out for single stack dispersion on a flat terrain surface and an inverse procedure is then applied so that different turbulent Schmidt numbers are used as inputs to... 

In this work a glass micromodel which its grains and pores are non-uniform in size shape and distribution is considered as porous medium. A two-dimensional random network modė, of micromodel with non-uniform pores has been constructed. The non-uniformity of porous model is achieved by assigning parametric distribution functions to pores throat and pores length, which was measured using image analysis technique. Statically derived expressions have been used for prediction of macroscopic properties of porous model including: dispersion coefficients, permeability-porosity ratio and capillary pressure. The results confirmed that predicted transport properties are in good agreement with the... 

Since the efficiency of non-classical continuum theories is strongly dependent on the recognition of the suitable values of small length scale parameters and there is still uncertainty about them, a novel approach, equivalent lattice stiffness method is developed here. This approach without the characteristic length scale parameter which arises in non-classical continuum theories, such as nonlocal theory and strain gradient theory, is capable to capture size effect more easily and accurately. This method is proposed based on the concept of lattice dynamics but a Taylor series expansion is involved to approximate the displacements of the continuous domain; accordingly, this approach is in... 

Since the efficiency of non-classical continuum theories is strongly dependent on the recognition of the suitable values of small length scale parameters and there is still uncertainty about them, a novel approach, equivalent lattice stiffness method is developed here. This approach without the characteristic length scale parameter which arises in non-classical continuum theories, such as nonlocal theory and strain gradient theory, is capable to capture size effect more easily and accurately. This method is proposed based on the concept of lattice dynamics but a Taylor series expansion is involved to approximate the displacements of the continuous domain; accordingly, this approach is in... 

An efficient, green, novel and rapid vortex-assisted dispersive solid-phase extraction (VADSPE) technique was used for the preconcentration and determination of trace levels of Cu2+ followed by flame atomic absorption spectrometry. Graphene oxide (GO) was synthesized from graphite and then modified by pectic acid (poly-d-galacturonic acid, PA) to synthesize the pectic acid–graphene oxide (PA-GO) nanocomposite. The Fourier transform infrared spectrophotometry, field emission scanning electron microcopy, energy-dispersive X-ray spectroscopy and X-ray diffraction analysis were used to characterize the synthesized GO-PA nanocomposite. By using VADSPE technique, PA-GO was used as an adsorbent for... 

Tehran, the capital of Iran, is one of the most polluted cities in the Middle East. However, there is no clear evidence of the effects of Tehran green spaces on reducing air pollution because there are still challenges to application of vegetation for improving air quality. The current study investigates the effects of a large volume of green space with 275 ha area in the vicinity of major highways on nearby air quality. Similar environments are often seen in many cities around the world. A computational fluid dynamics model containing aerodynamics and deposition effects of vegetation was used to simulate pollutant dispersion for eight wind directions and three different foliage densities.... 

In this report, sessile drop technique was employed to study the wetting of alumina by pure aluminium. Contact angle of pure aluminium on the surface of polycrystalline alumina substrate was studied in the temperature range of 750-1100 °C. Electron microscopy and EDX analysis were employed to examine the possible reactions at the melt-substrate interface. It was found that at temperatures in excess of 1050 °C molten aluminium can wet alumina. No reaction layer was detected at the Al/Al2O3 interface. © 2007 Elsevier B.V. All rights reserved  

Traditionally, solid-liquid mixing has always been regarded as an empirical technology with many aspects of mixing, dispersing and contacting where related to power draw. One important application of solid-liquid mixing is the preparation of brine from sodium formate. This material has been widely used as a drilling and completion fluid in challenging environments such as in the Barents Sea. In this paper large-eddy simulations, of a turbulent flow in a solid-liquid, baffled, cylindrical mixing vessel with a large number of solid particles, are performed to obtain insight into the fundamental aspects of a mixing tank. The impeller-induced flow at the blade tip radius is modeled by using the... 

Recently, a group of novel devices based on conducting interfaces has been proposed. These conducting interfaces can be implemented, for example, by using the inversion layer of MOS structures, trapped charges, or depletion layer charges. It has been shown that these structures can support surface electromagnetic waves. In this paper, the coupling of surface electromagnetic waves supported by conducting interfaces is first analysed. Next, by direct solution of Maxwell's equations and applying appropriate boundary conditions; exact analytical formulation of the dispersion equation has also been derived. Results driven by a coupled mode theory approach are justified by solving the exact... 

A novel plane-wave-based approach for analytical treatment of dispersive relation is developed and applied to analyze the behavior of electromagnetic waves in plasmonic-photonic-crystal slabs. Here Drude model is used for describing frequency dependent permittivity of plasma rods in host dielectric medium. In the present work, dispersion relation below and above the light line is calculated approximately by means of Maxwell-Garnett effective medium and Revised Plane Wave Method (RPWM). The eigen-functions are then used in Revised Guided Mode Expansion (RGME) as the set of orthonormal bases. Following this procedure, the accurate band structure is obtained. In these kind of methods there are...