Sharif Digital Repository

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

The authors carried out the study to prepare chitosan N-isopropylacrylamide hydrogel via heating and radiation processes. Properties investigation of prepared samples revealed that radiation prepared samples show higher yield and swelling ratios in comparison with the heating prepared ones. Effects of hydrogel addition to drilling mud on its important rheological properties such as apparent viscosity, plastic viscosity, and stress-strain behavior are measured. The rheological properties of hydrogel were compared with cellulosemethylcarboxyl and resins that are widely used in drilling fluid. The results demonstrate that whereas linear polymer effects on mud properties are more significant in... 

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

Field evidence indicates that the thermal and chemical regimes in wellbore considerably affect the wellbore stability. This study presents a general coupled model for transport of solute, solvent and heat including their combined effects on the wellbore stability. Optimization of drilling fluid parameters is crucial for wellbore stability analysis particularly in high pressure-high temperature environments. The coupled effects of chemical potential and temperature gradients on fluid flow significantly change the pore pressure and stress around a borehole. The effects of various parameters such as mud weight, solute concentration gradient, shale properties, and temperature gradient on... 

Supercritical fluid extraction is a new technology that could be effectively used to treat oil-contaminated drill cuttings generated during drilling for oil and gas. In this work, the solubility of oil-contaminated drill cuttings in supercritical carbon dioxide is obtained by an experimental flow type apparatus. The solubility was measured at 200 bar pressure, over a temperature range of 55-79.5°C. The measured solubility and experimental data for oil in drill cuttings were correlated using the PC-SAFT, PR and SRK EOS models, without any adjustable parameters. Average absolute derivations of less than 15.1 %, 98.7 %, and 99.3 % are achieved between predicted and experimental values for the... 

Drilling fluids consist of several components with different physical and structural form which can be assumed as complex fluids. Optimum performance of drilling process could be obtained through the dynamic fluid computation which requires a reliable mathematical model capable to predict transient and steady state rheological behavior of drilling fluid. Generalized Newtonian formulations are the most popular models for drilling fluids due to their simplicity in spite of their inabilities to predict transient and elastic behavior of such fluids. In this paper, we have developed a mathematical model to predict transient and steady state rheological behavior of the complex fluids on the scale... 

One of the basic challenges during drilling horizontal wellbores is the damage induced by invasion of mud filtrate into the formation. Addition of nanoparticles to drilling fluids has been recognized as a measure of control and reduction of filtrate invasion, which is the primary mechanism of the aforementioned formation damage. Despite notable advances in composing Nano-enhanced drilling fluids, the role of nanoparticle hydrophobicity on performance of the fluids has not been well studied. This study is based on a combined experimental-numerical methodology. In the experimental section, a procedure to find the optimum composition of Nano-enhanced water-based samples, containing... 

Cutting transport is an important goal in drilling operation especially in horizontal and deviated wells since it can cause problems such as stuck pipe, circulation loss and high torque and drag. To this end, this article focused on the affecting parameters on the cutting transport by computational fluid dynamic (CFD) modeling and real operational data. The effect of drilling fluid and cutting density on the pressure drop, deposit ratio and string stress on the cutting transport has been investigated. A systematic validation study is presented by comparing the simulation results against published experimental database. The results showed that by increasing two times of drilling fluid... 

In this paper a nonlinear dynamic model for drill string in inclined well drilling is developed. Effects of drilling mud flow rate, weight on bit, angular velocity along with viscous damping on stability and vibration of the drill string are studied. Findings indicate the nonlinear effects are significant on the results. The effects of drilling mud flow rate and weight on bit on the natural frequencies and time responses are evaluated. Enhancement of drilling mud flow rate results in decreasing of natural frequencies and vibrational amplitude, while increasing the weight on bit, leads to decrease of the natural frequencies and increase the vibrational amplitude. © JVE INTERNATIONAL LTD  

During oil and gas well drilling, the filtration control of bentonite water-based drilling fluids (BT-WBDFs), as an environmentally friendly fluid, is crucial to avoid formation damage and swelling shale problems. One of the most critical problems is undesirable changes in the rheology and filtration properties of the BT-WBDFs because of salt contamination. Herein, the potential of using both graphene oxide (GO) nanosheets and a graphene oxide-polyacrylamide (GO-PAM) nanocomposite is evaluated for controlling the filtration properties, especially in a salty medium. First, GO nanosheets were functionalized, and then the GO-PAM nanocomposite was synthesized using the solution polymerization... 

Colloidal gas aphron (CGA) based fluids have recently been introduced to develop depleted hydrocarbon reservoirs due to their ability in controlling fluid losses. Bubbles size of CGAs plays an important role in pore blockage ability as the controlling mechanism in fluid invasion reduction. However, fundamental understanding of how bubble size distribution is controlled by polymer and surfactant concentrations is not well discussed in the available literature. Almost all reported experiences on CGAs sizing were conducted on single bubble behavior, and little attention has been given to the variation of bubble size distribution (BSD) of CGAs at different levels of polymer/surfactant... 

In drilling industry, barite particles settling and barite sag as a major problem can potentially impose significant operational issues. Static conditions, in which well undergoes an extended shut-in period, could occur during different drilling and completion operations such fishing operation, tripping, and logging. Despite its importance, such phenomenon is not well understood yet. To avoid issues related to barite settlement and barite sag, a good understanding of the impact of different drilling parameters on barite settlement and sag phenomenon is required. Recently, the mathematical formulation and modeling of settlement and sag processes have gained more attention. In order to better... 

Employing an effective rheological model for the flow of drilling fluid that can accurately predict changing conditions is of significant importance in drilling fluid optimization. Traditional generalized Newtonian models cannot predict the time change condition, viscoelastic behavior, role of each component, or microstructural behaviors within the fluid. Consequently, the present research aims to develop constitutive equations in the framework of generalized bracket formalisms and the extra tensor concept that connect the microscopic and macroscopic properties and can overcome the aforementioned problems of traditional rheological models. The developed model is applicable for drilling fluid... 

Employing an effective rheological model for the flow of drilling fluid that can accurately predict changing conditions is of significant importance in drilling fluid optimization. Traditional generalized Newtonian models cannot predict the time change condition, viscoelastic behavior, role of each component, or microstructural behaviors within the fluid. Consequently, the present research aims to develop constitutive equations in the framework of generalized bracket formalisms and the extra tensor concept that connect the microscopic and macroscopic properties and can overcome the aforementioned problems of traditional rheological models. The developed model is applicable for drilling fluid...