Sharif Digital Repository

Ferrofluid has been used in many fields, such as microfluidics, droplet formation, and heat transfer, due to its potential to be attracted in the presence of a magnetic field. Droplet formation, itself, has many applications such as emulsions, 3D micro-printers, MEMS, and electro-sprays. In this study, the mechanism of ferrofluid droplet formation from the nozzle in the presence of an alternating magnetic field was investigated. The magnetic coil was fixed at different angles with respect to gravity and the effect of the alternating magnetic field and the angle of the magnetic coil axis with respect to gravity on the produced droplet volume, satellite droplet, and droplet formation frequency... 

The behavior of low-speed liquid jets emerging from rectangular orifices into a quiescent air is studied numerically. After ejection, the rectangular cross-section transforms into an elliptical form along the jet and while axis-switching includes elliptical cross-sections only, the rectangular shape never establishes again. The optimum wavenumber, corresponding to the most dominant wave, is found to be greater in orifices with higher aspect ratios and, as a result, breakup length of the jet will be shorter. The breakup length decreases exponentially with the initial amplitude of disturbances. Moreover, it is observed that the form of final breakup leads to elimination of the satellite... 

An attempt was made to introduce a new approach for evaluating mass transfer during drop formation via definition of a parameter related to the extent of the convective mixing within the growing drop. For this purpose it was assumed that the entrance of the dispersed flow into the growing drop from the nozzle is analogous to the entrance of the flow from a smaller channel to a larger one. This transfer mechanism has been dubbed the "flow expansion." A global time-dependent Reynolds number of growing drop (Regd) was defined based on the equivalent diameter of growing drop as a length scale and also on a velocity scale, which is obtained using this flow expansion assumption. The results show... 

Nanofluids are widely used as the continuous phase during droplet formation in microsystems due to their impressive features such as excellent thermal, magnetic, and interfacial properties. Although it is well-known that nanofluids are susceptible to exhibit non-Newtonian behavior even at a low concentration of nanoparticles, effects of non-Newtonian behavior of nanofluids have not been studied on droplet formation thus far. In this study, oil-in-water droplet formation with a relatively high viscosity ratio of the immiscible phases was studied numerically in a T-junction microchannel. To inspect the non-Newtonian effects of aqueous nanofluids on droplet formation, empirical data on the... 

Numerous applications in engineering and biotechnology have attracted the attention of many researchers to the analysis of underlying physical phenomena during the droplet pinch-off. In this study, the neck evolution during the formation of a ferrofluid droplet from a capillary is investigated under two types of magnetic field for a drop-on-demand system. The two types are steady and Pulse-Width Modulated (PWM) magnetic fields. First, under steady magnetic field, the necking process is studied for different values of magnetic Bond number and various angles between magnetic coil centerline and gravity. Subsequently, self-similar behavior in the vicinity of the detachment moment is observed.... 

In this study, ferrofluid droplet formation from a nozzle in the presence of a non-uniform Pulse-Width Modulated (PWM) magnetic field with different angles was studied experimentally. A Drop-on-Demand platform was introduced and three different regimes of droplet formation were observed. The regime map of the droplet formation was presented. A new type of droplet formation evolution was observed in which the droplet is formed while it is swinging around the nozzle, and the satellite droplet is not generated in this regime. The effects of five important parameters including magnetic flux density, applied magnetic frequency, duty cycle, distance between the nozzle and the center of the upper... 

Droplet-based microfluidics technologies hold great attention in a wide range of applications, including chemical analysis, drug screening, and food industries. This work aimed to describe the effects of different physical properties of the two immiscible phases on droplet formation in a flow-focusing microfluidic device and determining proper flow rates to form a droplet within the desired size range. A numerical model was developed to solve the governing equations of two-phase flow and the results were validated with previous experimental results. The results demonstrate different types of droplet formation regimes from dripping to jetting and different production rates of droplets as a... 

Researchers usually simplify their simulations by considering the Newtonian fluid assumption in microfluidic devices. However, it is essential to study the behavior of real non-Newtonian fluids in such systems. Moreover, using the external electric or magnetic fields in these systems can be very beneficial for manipulating the droplet size. This study considers the simulation of the process of non-Newtonian droplets’ formation under the influence of an external electric field. The novelty of this study is the use of a shear-thinning fluid as the droplet phase in this process, which has been less studied despite its numerous applications. The effects of an external electric field on this... 

Droplet-based microfluidics is an attractive approach for producing microgels due to its high potential to control the size and shape of the particles and precisely entrap the substances within the hydrogel matrix. However, the microfluidic generation of monodisperse microgels with desired structures is still challenging. Indeed, the rheological and interfacial properties of the immiscible fluids, as well as the adopted gelling strategy, play important roles in microfluidic methods. Herein, sodium alginate droplets with different concentrations are generated via a microfluidic device with a flow-focusing unit. Besides, a combined in situ and ex situ strategy is optimized to crosslink sodium...