Sharif Digital Repository

SnS2-SnO2 nano-heterostructures are synthesized with two different precursors of thioacetamide (TAA) and thiourea (TU) at various solvent ratios (SR) of ethanol and water by using a facile, economical, scalable, and cost-effective solvothermal method. The obtained products have been characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), and Brunauer–Emmet–Teller (BET) techniques. It is found that different precursors and various SR values have an influence on the composition and morphologies of the prepared nanostructures, leading to variation in capacitive behavior of the fabricated electrodes.... 

Carbon nanocapsules doped separately with epoxy and polyamine were used to fabricate an epoxy nanocomposite coating. Carbon nanospheres with dual-encapsulated epoxy/polyamine were dispersed uniformly in the epoxy resin at concentrations of 2, 5, and 10 wt %. The mechanical properties of the nanocomposites were studied by tensile testing and scratch hardness measurements. Furthermore, nanocomposites were applied on mild steel substrates, and their corrosion protection and barrier performance were evaluated using electrochemical impedance spectroscopy (EIS). Adhesion loss measurements of coatings after 240 h exposure to 3.5 wt % NaCl solution were performed by pull-off adhesion testing. Also,... 

The Persian Liquorice was introduced as a sustainable corrosion inhibitor with excellent inhibition action for mild steel in sodium chloride solution. Persian Liquorice is a root of Glycyrrhiza glabra including many active compounds like Glycyrrhizin (GL), 18β- Glycyrrhetinic acid (GA), Liquritigenin (LTG), Licochalcone A (LCA), Licochalcone E (LCE), and Glabridin (GLD). The Fourier transform infrared (FT-IR) spectroscopy was utilized to track various active components exist in the Persian Liquorice extract. Electrochemical impedance spectroscopy, potentiodynamic polarization and electrochemical current noise measurements were conducted to investigate the corrosion inhibition role of various... 

An impedimetric human papilloma virus (HPV) DNA biosensor based on gold nanotubes (AuNTs) in label free detection was materialized. The AuNTs decorated nanoporous polycarbonate (AuNTs-PC) template as biosensor electrode was fabricated by electrodeposition method. The single strand DNA (ss-DNA) probe was covalently immobilized onto the AuNTs-PC electrode. The hybridization of target sequences with the ss-DNA probe was observed by the electrochemical impedance spectroscopy (EIS). The biosensor showed high selectivity and could differentiate between the complementary, mismatch and non-complementary DNA sequences. The EIS measurements were matched to Randle's equivalent circuit. The... 

A new poly (acrylonitrile) (PAN)-based gel polymer electrolyte (GPE) is fabricated to study the effect of carbon nanotube (CNT) on dye-sensitized solar cell (DSSC) efficiency. The GPEs are examined using electrochemical impedance spectroscopy (EIS) to analyze ionic conductivity. A maximum of 4.45 mS cm −1 ionic conductivity is achieved at room temperature with incorporation of 11 wt.% CNT. Performance of DSSC is examined with a solar simulator, and the highest energy conversion efficiency of 8.87% is achieved with the addition of 11 wt.% CNT. All GPE samples are found to follow Arrhenius model with temperature-dependent ionic conductivity testing. Structural properties are also characterized... 

The reduced graphene oxide-Fe2O3 (rGO-Fe2O3) nanocomposites were synthesized by a facile and low-cost hydrothermal method employing rGO and Iron (III) nitrate precursors. The synthesis parameters including the reduction time and presence of reduction aid are studied. The structural and morphological studies of the nanocomposites were investigated by using Raman spectra, Fourier transform infrared spectroscopy, X-ray diffraction, and field emission scanning electron microscopy. The results indicate that Fe2O3 nanoparticles with average particle size of 25 nm are well anchored on graphene sheets and the weight percent of the nanoparticles in the nanocomposites was influenced by the reduction... 

Corrosion of steel rebars in concrete can reduce the durability of concrete structures in coastal environments. The corrosion rate of these concrete structures can be reduced by using suitable concrete additives and coating on rebars. This paper investigates the corrosion resistance of steel rebars by the addition of pozzolanic materials including fly ash, silica fume, polypropylene fibers, and industrial 2-dimethylaminoethanol (FerroGard 901) inhibitors to the concrete mixture. Three different types of rebars including mild steel rebar st37, and two stainless steel reinforcements, AISI 304 and AISI 316, were used. Various types of primer and coating including alkyd based primer, hot-dip... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

The early stages of nucleation and growth of nanostructures can control the shape and final size of the fabricated nanostructure. Therefore, the study of the nucleation and growth mechanism of nanostructures is of great importance. The purpose of this study is to investigate the nucleation and growth mechanism of nickel nanocones from a chloride-based bath containing ethylene ammonium dichloride as a crystal modifier. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry tests were employed to investigate the nucleation and growth mechanism and also the mechanism of crystal modifier performance on the growth of nanocones. Electrochemical studies revealed... 

In the present study, a rational two-step strategy is employed for the green, fast, very simple, and highly controllable synthesis of the bimetallic nickel-cobalt-based metal-organic frameworks (MOFs) on glassy carbon substrates by in situ transformation of nickel-cobalt-layered double hydroxide nanosheet (NiCo-LDHs NSs) intermediates into nickel-cobalt-benzene tricarboxylic acid MOFs (E-NiCo-BTC MOFs). The structural characteristics of the electrode materials in each step were investigated via Fourier transform infrared spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, elemental mapping, field emission scanning electron microscopy, and transmittance electron microscopy.... 

In this study, a novel inorganic/organic hybrid pigment based on zinc cations/Ferula Asafoetida leaves extract (Zn-FALE) was synthesized, and its corrosion protection properties were investigated in a saline solution and an organic coating. Interactions of components between Zn2+ cations and FALE were assessed by thermo-gravimetric analysis (TGA) and ultraviolet-visible (UV–visible) spectroscopy. Corrosion inhibitive performance of FALE and Zn-FALE pigments in the solution phase and coating phase was studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). TGA and UV–visible results revealed the proper chelation between inorganic and organic components of... 

In this study, the different parts of carthamus tinctorius plant, including petal (SPE), leaf (SLE), and shoot (SSE), have been extracted. Adsorption of the extracts on mild steel in 3.5 wt. % NaCl solution was evaluated employing electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, and electrochemical noise measurements (EN). The field-emission scanning electron microscopy (FE-SEM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) were employed to appraise the morphology of the samples surface subjected to the test solutions. According to the EIS results, the maximum adsorption efficiency belonged to the solution containing 1 g L−1 of... 

In this research, a novel, rapid, and non-immune electrochemical method was used to detect cardiac troponin I (cTnI) using a double recognition approach. Amine terminus cTnI aptamers immobilized on COOH-ZnO nanoparticles (COOH-ZnONPs) modified GCE surface were applied to capture cTnI for imprinting recognition. The COOH-ZnONPs were synthesized in a biological manner. Then, the methylene blue (MB) monomers were electro-polymerized around the cTnI-aptamer complexes. Following the removal of cTnI, cavities were constructed and converted to a new aptamer and molecular imprinted polymer (MIP) hybrid receptor (aptamer/MIP/ZnONPs). FT-IR spectra, SEM images, XRD patterns, and electrochemical... 

Designing a novel epoxy composite system with dual self-healing/barrier anti-corrosion functions using graphene oxide (GO) nano-platforms decorated by polypyrrole (PPy) nanoparticles doped with zinc metal ions is the major objective of this research attempt. GO-PPy-Zn nanoplatform was fabricated via one-pot polymerization of pyrrole monomers on GO and two direct/indirect methods of zinc doping. In order to verify the PPy nanoparticles synthesis on GO sheets several analyses such as UV–visible, XPS, HR-TEM and FE-SEM were performed. The epoxy nanocomposite coatings containing GO-PPy and GO-PPy-Zn nanoplatforms were fabricated and applied on carbon steel. The nanocomposite coatings... 

A novel AC impedance study on three-dimensional hybrid structures of graphene sheets/MoS2 nanorose (GMS) toward ethanol vapor detection is presented in this work. These defective 3D hybrid porous structures are sensitive to the presence of different gases as a result of charge transfer with gas species, as well as a change in the effective capacitance of the system. The sensing behavior of the samples is investigated throughout time-dependent impedance measurement and electrochemical impedance spectroscopy (EIS). The sensor response is estimated at about 20% to 10 ppm ethanol vapor, with the response and recovery times about 3.2 s and 0.8 s, respectively. Sensing mechanism proposed to... 

In planar perovskite solar cells (PSCs), engineering the extraction and recombination of electron–hole pairs by modification of the electron transport layer (ETL)/perovskite interface is very vital for obtaining high performance. The main idea here is to improve properties of the TiO2/perovskite interface by inserting an ultra-thin layer (UTL) of WO3 or SnO2 with the thickness of less than 10 nm by RF magnetron sputtering method. The structural and electrical characteristics of the samples were tested by XRD, AFM, FE-SEM, Mott-Schottky analysis, UV–Vis spectroscopy, J-V characterization and electrochemical impedance spectroscopy (EIS). It was found that the bilayer structured ETLs exhibit... 

In the present study, thermally oxidized nanodiamond (OND) was first modified non-covalently with dodecylamine (DDA) as corrosion inhibitor. In this respect, reactive primary amine of DDA molecule with high isoelectric point (IEP) could interact easily with negative charge carboxylic acid groups of OND. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) proved that OND nanoparticle was successfully functionalized by DDA up to approximately 5 wt% grafting contnet. Both OND and dodecylamine modified OND (DND) were loaded in epoxy (EP)/polyamine hardener matrix at the same concentration of 1 wt% and applied on mild steel substrate. Morphology of EP-DND and... 

Among the various approaches, ZnS treatment is the most convenient method for reducing the charge recombination in quantum dot-sensitized solar cells (QDSSCs). Here an improved method of ZnS treatment is explained for efficiency enhancement in QDSSCs. To get to the goal of device performance improvement, it is essential to have a uniform deposited layer. We utilized Triton X-100 (TX-100) as a surfactant to the convenient aqueous precursors during ZnS deposition by successive ionic layer adsorption and reaction method. It helps to decrease in contact angle and increase in wettability of the aqueous precursor and results in a more uniform deposited layer. The effect of modified ZnS treatment... 

A label-free electrochemical biosensor was developed for the rapid detection of the matrix metalloproteinase 9 (MMP-9) biomarker on the basis of antibody immobilizing on the zinc oxide (ZnO) nanoparticle and ZnO nanorod electrodes. The charge transfer resistance (Rct) of the electrodes was used as the indicator for MMP-9 concentration, which was obtained through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The ZnO nanorod-based biosensor exhibited linear behavior in the MMP-9 concentration range of 1–1000 ng/ml, which is a wider range than the available concentration ranges for most of the conventional methods. The biosensor sensitivity was 32.5 μA/(decade × cm2)... 

In the present work, N-doped hollow carbon nanospheres (N-HCNSs) is prepared by direct carbonization of polyaniline-co-polypyrrole (PACP) hollow spheres without template needing. Two different NiO nanostructures (nanosheets and nanowires) are prepared by forming a shell around the N-HCNSs via simple hydrothermal/calcination processes (NiO-NSs@N-HCNSs and NiO-NWs@N-HCNSs). The morphology and structure of the nanostructures are characterized using field emission scanning electron microscopy (FE-SEM), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The prepared nanocomposites are used as catalysts for the electrocatalytic...