Sharif Digital Repository

Ni II-(N,N′-bis(2,4-dihydroxyacetophenone)-2, 2-dimethylpropandiimine (Ni II{salnptn(4-OH) 2}) complex has been encapsulated within the supercage of zeolite-NaY by reacting Ni 2+-exchanged NaY with the flexible Schiff-base ligand that diffuses into the cavities. The encapsulated complex is characterized by EDX, scanning electron microscopy, powder X-ray diffraction, FT-IR, and cyclic voltammetry studies. Density functional calculation is being carried out on both the free nickel Schiff-base complex and that encapsulated in NaY zeolite to investigate changes in structural parameters, energies of the HOMO and LUMO, and absolute hardness and softness. Electrochemical properties of the NaY... 

Electrodes made of group VIII and IB metals were examined for their redox process and electrocatalytic activities towards the oxidation of ethylene glycol in alkaline solutions. The method of cyclic voltammetery (CV) and Open circuit potentials measurement (OCP) was employed. It is found that considerable electrooxidation current are observed for silver and copper but lower anodic overpotential for oxidation is obtained for gold and platinum. Oxide layer produced on the surface of all electrodes in alkaline solution under anodic scan participates in ethylene glycol electrooxidation. Oxidation current observed in the reverse scans for platinum and gold are higher than those observed in... 

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO 2-coated multiwalled carbon nanotubes (NH 2-TiO 2-CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH 2-TiO 2-CNT nano-composite. These techniques showed that the NH 2-TiO 2-CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP/NH 2-TiO 2-CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (ΔE p) of 70.6mV and a formal potential (E 0′) of -367.65mV (versus... 

Multi-walled carbon nanotubes decorated with Fe 3O 4 nanoparticles (Fe 3O 4NPs/MWCNT) were prepared and used to construct a novel biosensor for the simultaneous detection of adenine and guanine. The direct electro-oxidation of adenine and guanine on the modified electrode were investigated by linear sweep voltammetry. The results indicate a remarkable increase in the oxidation peak currents together with negative shift in the oxidation peak potentials for both adenine and guanine, in comparison to the bare glassy carbon electrode (GCE). The surface morphology and nature of the composite film deposited on GCE were characterized by transmission electron microscopy, atomic force microscopy,... 

Here we analyze the effect of two relevant aspects related to cell preparation on quantum dot sensitized solar cells (QDSCs) performance: the architecture of the TiO 2 nanostructured electrode and the growth method of quantum dots (QD). Particular attention is given to the effect on the photovoltage, V oc, since this parameter conveys the main current limitation of QDSCs. We have analyzed electrodes directly sensitized with CdSe QDs grown by chemical bath deposition (CBD) and successive ionic layer adsorption and reaction (SILAR). We have carried out a systematic study comprising structural, optical, photophysical and photoelectrochemical characterization in order to correlate the material... 

In this report, the fabrication of vertically aligned carbon nanotube nanoelectrode array (VACNT-NEA) by photolithography method is presented. Electrochemical impedance spectroscopy as well as cyclic voltammetry was performed to characterize the arrays with respect to different diffusion regimes. The fabricated array illustrated sigmoidal cyclic voltammogram with steady state current dominated by radial diffusion. The fabricated VACNT-NEA and high density VACNTs were employed as electrochemical glutamate biosensors. Glutamate dehydrogenase is covalently attached to the tip of CNTs. The voltammetric biosensor, based on high density VACNTs, exhibits a sensitivity of 0.976 mA mM-1 cm-2 in the... 

Microstructure developments of X80 weld metal by the addition of different amounts of alloying elements such as nickel and manganese to the covering of electrodes were investigated. For this reason, samples were welded with electrodes that Ni value has changed between 0.8 and 3.5% in two critical amounts of Mn 0.7 and 1.6. Optical microscopy and scanning electron microscopy were applied for peer investigation of microstructure. Different phase percentages were obtained by Clemex software and compared in all samples. Results indicated that Ni and Mn change weld microstructure in the as-deposited zone and reheated part and corresponding to each alloying element concentration, amount of... 

Hierarchical submicrometer TiO 2 hollow spheres with outer diameter of 300-700 nm and shell thickness of 200 nm are synthesized by liquid phase deposition of TiO 2 over carbon microspheres as sacrificial templates. The final TiO 2 hollow spheres are applied as a scattering layer on top of a transparent nanocrystalline TiO 2 film, serving as the photoanode of a dye-sensitized solar cell (DSC). In addition to efficient light scattering, the mesoporous structure of TiO 2 hollow spheres provides a high surface area, 74 m 2/g, which allows for higher dye loading. This dual functioning suggests that TiO 2 hollow spheres may be good replacements for conventional TiO 2 spheres as scatterers in DSCs.... 

Effect of cathodic enzymatic decolorization of reactive blue 221 (RB221) on the performance of a dual-chamber microbial fuel cell (MFC) was investigated. Immobilized laccase on the surface of a modified graphite electrode was used in the cathode compartment in order to decolorize the azo dye and enhance the oxygen reduction reaction. First, methylene blue which is an electroactive polymer was electropolymerized on the surface of a graphite bar to prepare the modified electrode. Utilization of the modified electrode with no enzyme in the MFC increased the power density up to 57% due to the reduction of internal resistance from 1000 to 750 Ω. Using the electropolymerized-enzymatic cathode... 

In the present work, an amperometric inhibition biosensor for the determination of sulfide has been fabricated by immobilizing Coprinus cinereus peroxidase (CIP) on the surface of screen printed electrode (SPE). Chitosan/acrylamide was applied for immobilization of peroxidase on the working electrode. The amperometric measurement was performed at an applied potential of -150. mV versus Ag/AgCl with a scan rate of 100. mV in the presence of hydroquinone as electron mediator and 0.1. M phosphate buffer solution of pH 6.5. The variables influencing the performance of sensor including the amount of substrate, mediator concentration and electrolyte pH were optimized. The determination of sulfide... 

Graphene oxide nanowalls with extremely sharp edges and preferred vertical orientation were deposited on a graphite electrode by using electrophoretic deposition in an Mg 2+-GO electrolyte. Using differential pulse voltammetry (DPV), reduced graphene nanowalls (RGNWs) were applied for the first time, in developing an ultra-high-resolution electrochemical biosensor for detection of the four bases of DNA (G, A, T, and C) by monitoring the oxidation signals of the individual nucleotide bases. The extremely enhanced electrochemical reactivity of the four free bases of DNA, single-stranded DNA, and double-stranded DNA (dsDNA) at the surface of the RGNW electrode was compared to electrochemical... 

The electrochemical behavior of lamotrigine (LMT) at the pyrolytic graphite electrode (PGE) is investigated in detail by the means of cyclic voltammetry. During the electrochemical reduction of LMT, an irreversible cathodic peak appeared. Cyclic voltammetric studies indicated that the reduction process has an irreversible and adsorption-like behavior. The observed reduction peak is attributed to a two-electron process referring to the reduction of azo group. The electrode showed an excellent electrochemical activity toward the electro-reduction of LMT, leading to a significant improvement in sensitivity as compared to the glassy carbon electrode. The results of electrochemical impedance... 

A mixture of multi-walled carbon nanotube/graphite paste electrode modified with a salophen complex of cobalt was prepared and was applied for the study of the electrochemical behavior of 6-mercaptopurine (MP) using cyclic and differential pulse voltammetry (DPV). An excellent electrocatalytic activity toward the oxidation of MP was achieved, which led to a considerable lowering in the anodic overpotential and remarkable increase in the response sensitivity in comparison with unmodified electrode. Utilizing DPV method, a linear dynamic range of 1-100 μM with detection limit of 0.1 μM was obtained in phosphate buffer of pH 3.0. The electrochemical detection system was very stable, and the... 

The voltammetric behavior of dopamine (DA) and uric acid (UA) on a gold electrode modified with self-assembled monolayer (SAM) of cysteamine (CA) conjugated with functionalized multiwalled carbon nanotubes (MWCNTs) was investigated. The film modifier of functionalized SAM was characterized by means of scanning electron microscopy (SEM) and also, electrochemical impedance spectroscopy (EIS) using para-hydroquinone (PHQ) as a redox probe. For the binary mixture of DA and UA, the voltammetric signals of these two compounds can be well separated from each other, allowing simultaneous determination of DA and UA. The effect of various experimental parameters on the voltammetric responses of DA and... 

In this study, the resistance spot welding (RSW) process of the galvanized interstitial free (IF) steel sheets and galvanized bake hardenable (BH) steel sheets, used in the manufacturing of car bodies, has been modeled and optimized. The quality measure of a resistance spot welding joint is estimated from the tensile-shear strength. Furthermore, four important process parameters, namely welding current (WC), welding time (WT), electrode force (EF), and holding time (HT) are considered as the factors influencing the quality of the joints. In order to develop an accurate relationship between the process inputs (4-component vectors) and the response output (tensile-shears strength) at first a... 

The electrochemical behavior of antioxidants daidzein (DZ) and 7-hydroxy-4-chromone (7-OH-4-CHM) was investigated. The oxidation of DZ is irreversible, pH-dependent, and occurs in two steps, the first of 4′-OH on the B-ring and the second on the 7-OH on the A-ring. The oxidation of 7-OH-4-CHM occurs on the 7-OH on the A-ring, is irreversible, pH-dependent and proceeds in a single step. The DZ diffusion coefficient was calculated in pH7.0 phosphate buffer to be D DZ=8.1×10 -5cm 2s -1. The detection limits of DZ and 7-OH-4-CHM was calculated as LOD DZ=0.08μM and LOD 7-OH-4-CHM=0.13μM  

L-Ascorbate anion electro-oxidation on a silver electrode in hydroxide solution in the absence and presence of sodium polysulfide of concentrations from 1 × 10 -5 to 4.5 × 10 -4 mol/L was studied using cyclic voltammetry and electrochemical impedance spectroscopy. Both hydroxide and polysulfide ions inhibited L-ascorbate ion oxidation, with the poisoning effect of polysulfide ion being more pronounced in the potential range of -0.3 to -0.2 V/SCE. The time constants for L-ascorbate ion oxidation in the absence and presence of polysulfide were, 10 -3 to 1 × 10 -2 s and 1 × 10 -4 to 1 × 10 -2 s, respectively depending on the potential used for the impedance analysis. Based on the cyclic... 

A sensitive glutamate biosensor is prepared based on glutamate dehydrogenase/vertically aligned carbon nanotubes (GLDH, VACNTs). Vertically aligned carbon nanotubes were grown on a silicon substrate by direct current plasma enhanced chemical vapor deposition (DC-PECVD) method. The electrochemical behavior of the synthesized VACNTs was investigated by cyclic voltammetry and electrochemical impedance spectroscopic methods. Glutamate dehydrogenase covalently attached on tip of VACNTs. The electrochemical performance of the electrode for detection of glutamate was investigated by cyclic and differential pulse voltammetry. Differential pulse voltammetric determinations of glutamate are performed... 

A composite film constructed of surfactant doped over-oxidized polypyrrole and multi-walled carbon nanotube was prepared on the surface of glassy carbon electrode by the electro-polymerization method. Surface characterization of the modified electrode was performed by scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectrometry. The investigations have been proved that the over-oxidation of the modifier film resulted in a porous thin layer that improves the interlayer diffusion mechanism for the electroactive species. On the other hand, the negative charge density on the surface of the electrode excludes the negative analytes (e.g. ascorbate and Fe(CN)63?/4?)... 

Models play an important role in fuel cell design and development. One of the critical problems to overcome in the proton exchange membrane (PEM) fuel cells is the water management. In this work a steady state, two-dimensional, isothermal model in a single PEM fuel cell using individual computational fluid dynamics code was presented. Special attention was devoted to the water transport through the membrane which is assumed to be combined effect of diffusion, electro-osmotic drag and convection. The effect of current density variation distribution on the water content (λ) in membrane/electrode assembly (MEA) was determined. In this work the membrane heat conductivity is considered as a...