Sharif Digital Repository

Variational principle is used to derive the nonlinear response of the floating roof of cylindrical liquid storage tanks due to harmonic base excitations. The formulation accounts for nonlinearity due to large deflections of the floating roof. The derived nonlinear governing equation for the sloshing response of the floating roof has a cubic nonlinear stiffness term similar to the well known Duffing equation. It is shown that accounting for large deflections could substantially reduce the wave elevation for near resonance harmonic excitations. Evaluating the response of the nonlinear model for increasing amplitudes of near resonance harmonic excitations gives rise to the appearance of sub and... 

A simple and efficient method was developed for fabricating spherical granules of CuO catalyst via a three-step procedure. In the first step, copper oxide nanoparticles were synthesized by hydrothermal decomposition of copper nitrate solution under supercritical condition. Then, they were immobilized in the polymeric matrix of calcium alginate, and followed by high-temperature calcination in an air stream as the third step, in which carbonaceous materials were oxidized, to result in a pebble-type catalyst of high porosity. The produced CuO nanoparticles were characterized by transmission electron microscopy (TEM) that revealed an average size of 5 nm, X-ray diffractometry (XRD), and thermo... 

Friction and wear behaviors of artificially aged 2024 Al and 2024 Al/20 vol.% SiC composite prepared by powder metallurgy method were investigated in the temperature range 20250 °C. Dry sliding wear tests were conducted at a constant sliding velocity of 0.5 m/s, an applied load of 20 N, and a sliding distance of 2500m using a pin-on-disc apparatus. Worn surfaces and wear debris were also examined by using SEM and EDS techniques. All specimens showed a transition from mild-to-severe wear above a critical temperature. In the mild wear regime, the wear rate and the friction coefficient of the composite specimen were higher than those of the unreinforced alloy. The SiC particles led to an... 

The quantification of carbon dioxide (CO2) dissolution in oil is crucial in predicting the potential and long-term behavior of CO2 in reservoir during secondary and tertiary oil recovery. Accurate predicting carbon dioxide molecular diffusion coefficient is a key parameter during carbon dioxide injection into oil reservoirs. In this study a new model based on adaptive neuro-fuzzy inference systems (ANFIS) is designed and developed for accurate prediction of carbon dioxide diffusivity in oils at elevated temperature and pressures. Particle Swarm Optimization (PSO) as population based stochastic search algorithms was applied to obtain the optimal ANFIS model parameters. Furthermore, a simple... 

Fin stabilizers are very important device for controlling the ship roll motion against the external moments due to wave. This paper presents numerical results for flow field simulation and the hydrodynamic performance of fin stabilizer attached to a ship hull with free surface effects. Combination of CFD and RANS method has been used for this study. The fin is nonrectangular NACA0015 profile section with a finite aspect ratio. The numerical results include pressure distributions and flow field around the fin which are used to calculate lift coefficients and free surface elevation as the main interest. Some results are compared with available experimental and numerical data in literature and... 

Al-20Si-5Fe-2X (X = Cu, Ni and Cr) ribbons were produced by melt-spinning and consolidated by hot pressing at 400 °C for 60 min. The microstructure of the ribbons and the consolidated alloys was investigated using optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffractometry (XRD) method, and transmission electron microscopy (TEM). The hardness and compressive strength of the specimens at ambient and elevated temperatures were examined. The microstructure of the ribbons exhibited featureless and dendritic zones. Results of XRD and TEM showed formation of spherically shaped Si particles with an average diameter of 20 nm. Ultrafine Si (110-150 nm) and iron-containing... 

Estimating precipitation at high spatial-temporal resolution is vital in manifold hydrological, meteorological and water management applications, especially over areas with un-gauged networks and regions where water resources are on the wane. This study aims to evaluate five downscaling methods to determine the accuracy and efficiency of which on generating high-resolution precipitation data at annual and monthly scales. To establish precipitation-Land surface characteristics relationship, environmental factors, including Normalized Difference Vegetation Index (NDVI), Land Surface Temperature (LST) and Digital Elevation Model (DEM), were considered as proxies in the spatial downscaling... 

A simple bio-conjugation procedure to surround a single horseradish peroxidase (HRP) enzyme molecule with dendritic polyester macromolecules (polyester-32-hydroxyl-1-carboxyl bis-MPA dendron, generation 5) was proposed. The characterization of resultant nanoparticles entitled HRP dendrozyme, was performed by transmission electron microscopy, dynamic light scattering, gel permeation chromatography and Fourier transform infrared spectroscopy. The results showed that HRP nanoparticles were spherical in shape and have an average size of 14 ± 2. nm in diameter. Furthermore, bio-conformational characterization of HRP dendrozyme was performed by means of circular dichroism and fluorescence... 

Evaporation of polymeric solid fuels in backward facing step geometry subject to an inlet oxidizer flow at elevated temperatures is considered and convective heating of the fuel surface by the hot oxidizing inlet flow and subsequent mixing of the evaporated fuel with the oxidizer flow and its combustion is numerically studied. The objective of this work is to gain insight into the auto-ignition of the fuel and its controlling parameters in this configuration. The system of governing equations is solved with a finite volume approach using a structured grid in which the AUSM scheme is used to calculate the gas phase convective fluxes. The flowfield is turbulent and the SpalartAllmaras... 

The effect of Rare earths addition to AZ91 magnesium alloy and its influence on the microstructure and mechanical properties was investigated in this study. Addition of cerium rich misch metal to AZ91 alloy resulted in formation of needle shape particles, which had a very high thermal stability, providing superior mechanical properties compared to AZ91 magnesium alloy. As a result, the grain boundaries were less susceptible for grain boundary sliding at high temperatures. The steady state creep rates were specified and for the AZ91 alloy and the results indicate a mixed mode of creep behavior, with some grain boundary effects contributing to the overall behavior. However for the RE added... 

The aim of this work is to study the effect of cooling rate and subsequent hot consolidation on the microstructural features and mechanical strength of Al-20Si-5Fe-2X (X = Cu, Ni and Cr) alloys. Powder and ribbons were produced by gas atomization and melt spinning processes at two different cooling rates of 1 × 105 K/s and 5 × 107 K/s. The microstructure of the products was examined using optical microscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The particles were consolidated by hot pressing at 400 °C/250 MPa/1 h under a high purity argon atmosphere and the microstructure, hardness and compressive strength of the compacts were evaluated.... 

The effect of Al content and Si addition on the microstructural and creep properties of Mg-Al-RE alloys was investigated in this study. The steady state creep rates were specified and it was found that the creep behavior of the alloy, which is dependent on the stability of the near grain boundary microstructure, was improved by the RE and Si addition. For the AZ91 alloy, the results indicate a mixed mode of creep behavior, with some grain boundary effects contributing to the overall behavior. However for the RE and Si added samples, sliding of grain boundaries was greatly suppressed and the dislocation climb controlled creep was the dominant deformation mechanism. Analysis of creep rates... 

Memory and motor deficits are commonly identified in Parkinson's disease (PD). 1-Methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) is transformed to MPP+ via monoamine oxidase B (MAOB), which causes oxidative stress and destroys dopaminergic (DA) neurons in substantia nigra pars compacta (SNc) and is widely used to create animal models of PD. However, to-date, a comprehensive analysis of the MPTP effects on various aspects of PD does not exist. Here, we provide a systematic review and meta-analysis on the MPTP effects on memory and motor functions by analyzing 51 studies on more than one thousand animals mainly including rats and mice. The results showed that in addition to motor functions... 

Background: Remote cardiac monitoring and screening have already become an integral telemedicine component. The wide usage of several different wireless electrocardiography (ECG) devices warrants a validation study on their accuracy and reliability. Methods: Totally, 300 inpatients with the Nabz Hooshmand-1 handheld ECG device and the GE MAC 1200 ECG system (as the reference) were studied to check the accuracy of the devices in 1 and 6-limb lead performance. Simultaneous 10-second resting ECGs were assessed for the most common ECG parameters in lead I. Afterward, 6-lead ECGs (limb leads), were performed immediately and studied for their morphologies. Results: Of the 300 patients, 297 had... 

Numerous people suffer from accidental or deliberate exposure to different pesticides when poisoning with aluminum phosphate (AlP) is increasing in the eastern countries. Aluminum phosphate is a conventional insecticide that quickly reacts with water or the moistures in the atmosphere and produces fatal phosphine gas, which absorbs quickly by the body. Oral consumption or inhalation of AlP leads to excessive reaction of the body such as fatigue, vomiting, fever, palpitation, vasodilatory shock, increasing blood pressure, cardiac dysfunction, pulmonary congestion, shortness of breath, and death. The garlic smell from the patient's mouth or exhale is one of the methods to recognize the...