Sharif Digital Repository

Barium strontium titanate (BST) was prepared via the simple sol-gel method by using tetrabutyl ti-tanate, ethanol, citric acid and ethylene glycol as starting materials. Thermogravimetry and differential thermal analysis were used to examine the behaviour of the xerogel. The particle size of BST was approximately 21 nm, as calculated by the X-ray diffraction and confirmed by transition electron microscopy for the calcination temperature of 750 °C. It was found that the particles of BST powders calcined at 750 °C were smaller and more homogeneous and uniform than those obtained at 800 °C  

In this paper, nano/microstructured-conducting polypyrrole has been prepared on Cu/Au interdigital electrode surfaces by using constant potential amperometry technique. The Fe(II) ions were used as catalyst and X = ClO4 -, pTs-, Cl-, TCA-, DS-, DBS- was implemented as anion dopants. The morphologies of the films were investigated by field emission scanning electron microscope. A remarkable dependence was observed between the type of anion dopant and the morphology of polypyrrole (PPy). The sensing behavior of the PPy-X sensor has been studied toward acetone, methanol, ethanol, 1-propanol, 2-propanol, nitromethane, propylamine, pyridine, and gas mixtures of aliphatic alcohols. The responses... 

Graphene oxide platelets synthesized by using a chemical exfoliation method were deposited on anatase TiO2 thin films. Postannealing of the graphene oxide/TiO2 thin films at 400 °C in air resulted in partial formation of a Ti-C bond between the platelets and their beneath thin film. By using atomic force microscopy and X-ray photoelectron spectroscopy analyses, UV-visible light-induced photocatalytic reduction of the graphene oxide platelets of the annealed graphene oxide/TiO2. thin films immersed in ethanol was studied for the different irradiation times. After 4 h of photocatalytic reduction, the vertical space between the platelets decreased from about 1.1 to less than 0.8 nm and the... 

Herein, we describe for the first time synthesis, characterization, chemosenor behavior, and mechanism of metal ion-ligand interaction of two novel side-armed naphthodiaza-crown macrocycles (L1 and L2) by employing of IR, 1H and 13C NMR, UV–vis, fluorescence spectroscopy, CHN microanalysis and single crystal X-ray diffraction. Preliminary fluorescence studies in ethanol as solvent revealed that the metal ion recognition by L1 was strongly different from L2 suggesting the importance of the number of benzylic side-arms on the extent of the interaction with Mn+. For instance employing fluorescence titration in ethanol showed binding constant values 105 M−1 and 2.6×106 M−1 for L1/Al3+ and... 

In the present work, the spray characteristics of bio-ethanol and its blends have been experimentally and theoretically investigated. To have a comprehensive study, the effects of ambient condition and injection pressure on the spray of different blends have been considered. Macroscopic and microscopic characteristics of spray such as tip penetration length, cone angle, projected area, volume, Sauter Mean Diameter (SMD), and Ohnesorge number are investigated precisely. Besides, air entrainment and atomization analyses have been carried out to improve mixture formation process. Using curve fitting and least squares method, theoretical correlations have been suggested in such a way to predict... 

Reactivity controlled compression ignition has been introduced to implement controllable, clean, and high thermal efficiency without undermining the advantages of premixed combustion. However, simultaneous auto-ignition introduced by reactivity controlled combustion challenges the combustion under higher load operations. This experimental study incorporates a dual phase heat release concept with the purpose of improving the performance of reactivity controlled compression ignition engine. Different ratios of ethanol/diethyl-ether blends (from 0% to 40% diethyl ether and 70% premixed ratio) were applied to a light duty diesel engine at various combustion timings and engine loads. The diesel... 

In order to study the heat transfer mechanism and predict the heat transfer capability of a pulsating heat pipe (PHP), a numerical model was used to simulate the oscillating behavior of liquid slug considering liquid film thickness in the evaporator and reduction of liquid film thickness due to evaporation. In this article, thermal performance of an open loop closed end PHP of copper with a diameter of 1 mm and various working fluids including water (DW) and ethanol was investigated. The governing equations of mass, momentum, and energy equations were solved for liquid slug and vapor plugs. The results showed that by considering liquid film thickness behind the liquid slug, for both the... 

The reaction of the functionalized mesoporous SBA-15 in absolute ethanol with copper (II) acetate afforded a novel CuII-Schiff base/SBA-15 catalyst. The compound CuII-Schiff base/SBA-15 was characterized by IR spectroscopy, small-angle X-ray diffraction (SAX), Energy Dispersive X-ray Spectroscopy (EDXS), X-ray Absorption Near Edge Structure (XANES), Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), and N2 adsorption/desorption studies. Further, the catalytic activity of this well-defined material was tested in three-component Copper-catalyzed Azide-Alkyne Cycloaddition (CuAAC) reactions to obtain 1,4-disubstituted-1,2,3-triazoles in good to excellent yields from an... 

A rotating closed loop pulsating heat pipe (RCLPHP) was experimentally investigated as a passive heat sink for rotary equipment cooling. The effects of heat input, rotational speed, filling ratio, and working fluid on the thermal resistance of RCLPHP were studied. Pure water and ethanol were used as working fluids with filling ratios of 30%, 50%, and 70% by volume, and the RCLPHP was tested at four rotational speeds: 200, 400, 600, and 800 rpm. The results showed that the best filling ratio for both water and ethanol is 50% and proved that the RCLPHP is able to work efficiently in a wide range of rotational speed. Moreover, it was observed that at the optimum filling ratio for ethanol and... 

Despite their potential applications, a limited number of studies for synthesizing vertical MoS2 nanoflakes especially via CVD have been reported so far, which generally involve tedious complex- and/or multi-step growth processes. In this study, direct synthesis of vertical MoS2 nanoflakes grown on the SiO2/Si substrate during a rapid sulfidation process by CVD method has been reported. Material characterization was performed using Raman spectroscopy, XRD and FE-SEM. The XRD results indicated the dominant phase of 2H–MoS2 within the synthesized layers. The characteristic distance between the two dominant peaks of E1 2g and A1g in the Raman spectra confirms the multi-layered structure for... 

A new zwitterionic Palladium (II) complex has been synthesized by the one-pot mixing of Pd(OAc)2, 2-aminophenol and (3-formyl-4-hydroxy-5-methylbenzyl) triphenylphosphonium chloride, in refluxing ethanol. The metal complex formed was characterized by 1H NMR, 13C NMR, 31P NMR and X-ray crystallographic technique and its efficiency tested as a homogeneous pre-catalyst in Heck-Mizoroki cross coupling reaction using γ-Valerolactone (GVL) as a biomass-derived green medium. All the products were obtained in good to excellent yields. © 2019  

The lipase-immobilized polyethyleneimine (PEI)- and polyacrylic acid (PAA)–coated magnetic silica nanocomposite particles (L-PEI-MS and L-PAA-MS, respectively) were prepared and applied at various transesterification reaction conditions. The reactions were carried out with soybean, sunflower, canola, and palm oils along with methanol or ethanol in the solvent-free and n-hexane systems. The highest fatty acid methyl ester (FAME) and fatty acid ethyl ester (FAEE) synthesis yields were obtained from the transesterification of palm oil, i.e., almost 7.7–10.2% higher than other oils. At the constant reaction conditions, the application of ethanol leads to higher (6.0–8.7%) reaction yields in... 

Purpose: This paper aims to study peroxymonosulfate (PMS) activation in the ultraviolet (UV)/ozone process for toxic cyanide degradation from aqueous solution by a novel and simple method. Design/methodology/approach: Photocatalytic degradation of cyanide (CN-) was carried out using a bench-scale photoreactor. Optimization of the UV/ozone process for the highest removal of cyanide was obtained. The effect of parameters such as ozone concentration, PMS concentration, temperature, cations (Cu2+, Co2+ and Fe2+), cyanide concentration, anions (bicarbonate, carbonate, chloride, nitrite, nitrate and sulfate [SO42−]) and scavengers (ethanol [EtOH], humic acid, TBA and NaN3) was investigated for CN-... 

Room temperature gas sensing behavior of arrayed one-dimensional (1D) nickel nanowires (Ni NWs) are investigated using impedance spectroscopy. Ni nanowires synthesized via electrochemical deposition method based on anodic aluminum oxide (AAO) templates. Their structural characterization verified by scanning electron microscopy (SEM), x-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR) analysis. Impedance spectroscopy as an essential technique utilized to understand the mechanism of gas interaction with the wires through the changes in their electronic behavior. Bode and Nyquist plots with the real and imaginary impedances are plotted versus frequency range of 500 Hz... 

The Zr-based metal-organic framework (MOF, UiO-66) was synthesized solvothermally. The synthesized UiO-66 was activated using different solvents (acetone, chloroform, and ethanol) via two activation methods of centrifugation and Soxhlet extraction over different periods (1–10 days). The crystalline structure and morphology of the synthesized UiO-66s were characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, and field-emission scanning electron microscopy (FESEM) techniques. The adsorption behaviors of the synthesized UiO-66s were then investigated by selecting anionic methyl red (MR) and cationic methylene blue (MB) as the model dyes. It was found that a change in... 

Biomass is becoming an increasingly widespread source of energy. Yet land, as one of the most important resources in biomass production, is surprisingly understudied in the literature of biomass supply chain planning. This study proposes a novel framework that combines the literature of bioethanol supply chain design with agricultural land planning to simultaneously address optimal supply chain planning and sustainable land use in a bioethanol supply chain. A bi-objective mixed-integer linear programming (MILP) model is proposed to formulate the optimal design and planning of a bioethanol supply chain network considering competition of food and biomass feedstock over the available croplands.... 

In the present work, the multivariate kinetic complexation of a new synthesized ligand, 1-(2″-hydroxyl cyclohexyl)-3′-[aminopropyl]-4-[3′-aminopropyl]piperazine (Pizda) and Cu2+ in 50% ethanol-water solution is investigated using the UV-vis stopped-flow technique and state-of-the-art multi-wavelength numerical analysis. Model-based least squares fitting analysis or hard modeling is a specific part of chemometrics which is based on mathematical relationships for describing the measurements. Some recent developments include the incorporation of the effects of non-ideal experimental conditions into the fitting algorithm so it can substantially simplify experimental procedures. In this study no... 

In order to deal with the limitations of micro-pumps and micro-valves and meet the advantages of magnetic systems a novel plan is described here. The idea behind the plan is that magnetic particles, mixed and dispersed in a carrier liquid, can be accumulated and retained at specific sites to form pistons in a micro-tube using some external magnetic field sources along the tube. In other words, using some solenoids and switching them on and off, in a specific order and period, causes the desired external magnetic field variation through the tube. Changing the period and the mode of activation and deactivation of the solenoids, which are called switching time and switching mode, respectively,... 

Membrane separator based on the polyvinylidene fluoride (PVDF) is prepared via the non-solvent-induced phase separation (NIPS) method with water and ethanol as non-solvent and a mixture of dimethylformamide (DMF) and acetone as solvent. The effect of various acetone/DMF ratios and non-solvent material on the physical and electrochemical properties of the separator is studied by FE-SEM, tensile strength, electrochemical AC-impedance spectroscopy (EIS), thermal stability, and linear sweep voltammetry (LSV). The charge-discharge studies are carried out by fabricating a lithium foil/polymer electrolyte membrane/LiFePO4 cell. The results show that with the change of solvent and non-solvent, the... 

The Zr-based metal-organic framework (MOF, UiO-66) was synthesized solvothermally. The synthesized UiO-66 was activated using different solvents (acetone, chloroform, and ethanol) via two activation methods of centrifugation and Soxhlet extraction over different periods (1–10 days). The crystalline structure and morphology of the synthesized UiO-66s were characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, and field-emission scanning electron microscopy (FESEM) techniques. The adsorption behaviors of the synthesized UiO-66s were then investigated by selecting anionic methyl red (MR) and cationic methylene blue (MB) as the model dyes. It was found that a change in...