Sharif Digital Repository

The increasing need for more efficient and environmentally friendly microturbines necessitates the utilization of compact recuperators resulting in lower fuel consumption and emissions. The goal of this research is to determine the performance behavior of a primary surface recuperator to be incorporated in a 100 kW microturbine. Primary surface recuperator, known for relatively favorable characteristics in heat transfer, low weight, and high efficiency is considered as a candidate in aviation engines. In this research, a computational model for heat transfer and pressure losses is used for the design optimization of annular involute-profile cross wavy primary surface recuperators in... 

Two-dimensional incompressible flow analysis is one the most important applied issues in engineering and applied science field. Numerical solution of governing equations of flow requires exact computational grid generation.In complex geometries, generation of the grid which is coincident to the body is very difficult and time consuming. Immersed boundary method is an appropriate superseded method of body conformal grid generation in flow field numerical solution. In this method a grid which is not coincidentto bodyis generated and flow field properties are modified on points adjacent to the boundary of the object (Ghost Cell Method) to satisfy boundary conditions.
The purpose of this... 

Because of seismic flexibility, aesthetics, economic advantage and rapid construction of reinforced soil walls, application of these walls has raised tremendously since 1970’s. The early reinforced soil retaining walls used metallic srips to reinforce the soil with precast concrete panels as facing, however, since 1990’s using of geosynthetics to reinforce these walls with modular concrete block facing have replaced the old fashion. In this study, a finite difference code was developed in FLAC software. After verification of the numerical modeling procedure, a wall with 3.6m height reinforced by geosynthetics was simulated. In the course of numerical simulations the stage of counstruction,... 

In the present study, the numerical simulation of incompressible laminar and turbulent flows using a high-order finite difference lattice Boltzmann method is presented. To handle curved geometries with non uniform grids, the incompressible form of lattice Boltzmann equation is transformed into the generalized curvilinear coordinates and the spatial derivatives of the resulting equation are discretized using the fifth-order WENO scheme. The advantage of using the WENO-LBM developed is that it needs less number of grid points and remains stable even at high Reynolds number flows. For the temporal term, the fourth-order explicit Rung-Kutta scheme is adopted for laminar flow calculations and... 

With the transportation progress and appearance of transit industry, necessity of modern vehicles redounded to appearance of heavier trucks with higher speeds, moving on the roads. In addition, with the progress in mechanical engineering and automobile industry, appearance of such trucks is growing increasingly. So, bridges as one of the structures that civil engineers design and construct, nowadays are subjected to higher moving dynamic loads in comparison with the past. As a result, lots of investigation and researches in the universities and institutions all over the world are being conducting on the effects of the vehicle speeds on the dynamic stresses of the bridges. Bridge codes... 

The main goal of this project is analysis, design and implementation of scanning near field optical system for detection of biological species. The activities fall in two main category. Theoretical and experimental. In theoretical part, after studying different models describing near field interaction, we have developed software for computationally analysis of nonlinear interaction of light with nanostructures, considering third order nonlinear susceptibility and dispersion behavior of permittivity for metallic nanostructures. The software implements three dimensional finite difference time domain (FDTD) method for analysis of interaction of electromagnetic wave with matter. In developed... 

High temperature gas cooled reactors (HTGR) are one of the most promising reactors in the new generation of world commercial reactors. They are divided into two main categories: Prismatic gas cooled reactors and pebble bed gas cooled reactors. These reactors have many advantages, such as inherent safety, high thermodynamic efficiency and the possibility of producing hydrogen. One of the most important challenges in developing these reactors is providing appropriate codes in design and simulating their performance. Two codes have been developed in this thesis. The first, THFAM, is a steady state thermal hydraulic code which helps in analyzing a fuel assembly. The second, named THCM is... 

The numerical solution of the parabolized Navier-Stokes (PNS) equations for accurate computation of hypersonic axisymmetric flowfield with real gas effects is obtained by using the fourth-order compact finite-difference method. The PNS equations in the general curvilinear coordinates are solved by using the implicit finite-difference algorithm of Beam and Warming type with a high-order compact accuracy. A shock fitting procedure is utilized in the compact PNS scheme to obtain accurate solutions in the vicinity of the shock. To stabilize the numerical solution, numerical dissipation term and filters are used. The main advantage of the present formulation is that the basic flow variables... 

In this study, the Shokov-BGK model of the Boltzmann equation is reformulated and generalized to consider the real gas effects. At first, the formulation is performed to consider an arbitrary specific heats ratio and the correct Prandtl number for polyatomic gases. Here, the resulting equations of the present formulation are numerically solved by applying the high-order finite-difference weighted essentially non-oscillatory (WENO) scheme. The present solution method is tested by computing the one-dimension Reiman problem with different specific heats ratios for a wide range of the Knudsen numbers. The results are compared with the available gas-kinetic results which show good agreement. It... 

One of the common and efficient methods in the construction of large-scale structures from composites is the Vacuum Assisted Resin Transfer Molding (VARTM) method, which is widely used in the automotive industry, wind turbine blades, warships and pleasure boats, etc. VARTM is one of the liquid molding methods in which one side of the closed mold is replaced with a vacuum bag and the resin flows into the mold only with the help of air pressure (pressure of one atmosphere). One of the main challenges in the vacuum resin molding process is to be aware of the physics governing the flow motion in the porous mold so that the dry spots formed in the mold can be located accordingly. On the other... 

It is the goal of this thesis to develop an analytical model for the hydro-mechanical deep drawing (HDD) process of an axisymmetric sheet metal with the fixed gap method to evaluate the effects of some assumptions such as: proportional loading, plane stress, and constant thickness conditions. The effect of parameters on the HDD process is also studied. The main model is developed with considering the normal stress and part thickness change, non-proportional loading, bending and unbending effects at the top of the cup wall. The interrelationships between geometrical and mechanical variables are obtained in the finite difference form based on the incremental strain theory, thereby being solved... 

In this research, a simple yet efficient two-dimensional model of proton exchange membrane fuel cell (PEMFC) is developed using stream function-vorticity formulation. The model accounts for the fluid flow and masstransport processes in cathode gas channel and gas diffuser layer. The governing equations are decoupled and solved usingtwo efficient approaches, Alternating Direction Implicit (ADI) and False Transient Method (FTM) in a modified geometry to simulate the fully-developed condition consistently. An in-house code was developed to perform a parametric study of fuel cell performance. The results show the variations of important parameters along the cathode channel such as velocity... 

Earth and rockfill dams are enormous three-dimensional structures constructed from earth and rockfill materials. They are mainly built for water supply, agricultural land irrigation, electricity generation, and flood control. Earthquake is one of the most significant natural hazards affecting the stability of these dams. Nowadays, with the development of computers and software, the seismic behavior of most dams are assessed by dynamic analysis. In a considerable part of technical literature, dynamic analysis of earth and rockfill dams have been performed by applying only the horizontal component of the earthquakes, and the effects of vertical component of the earthquakes have often been... 

In the present study, the numerical simulation of 2D inviscid compressible cavitation flow is performed by using the compact finite-difference method. The problem formulation is based on the multiphase compressible Euler equations with the assumption of the homogeneous equilibrium model and the system of baseline differential equations is comprised of the continuity, momentum and energy equations for the vapor-liquid mixture. To complete the system of governing equations, the ideal gas relation is used for the vapor phase and the Tait relation is applied for the liquid phase, and therefore, the compressibility effects are considered for both the vapor and liquid phases. To analyze the flow... 

Liquefaction is an important phenomenon in geotechnical engineering which can cause severe damages to structures. Liquefaction-induced lateral spreading is defined as the lateral displacement in mild slopes or level grounds ending in free faces (such as quay walls) triggered by liquefaction in subsurface soil layers. During recent years, extensive studies have been conducted around the world documenting liquefaction induced lateral spreading and its effects on deep foundations. In the present study, a series of shaking table experiments which were previously conducted at Sharif University of Technology are numerically simulated using the three dimensional finite difference based program,...