Sharif Digital Repository

Metallic glasses have been applied in industry owing to their attractive mechanical, physical, and chemical properties. such as high electrical resistivity, soft-type superconductivity, good magnetic softness, high strength and large elastic strain. These unusual properties make the amorphous alloys potentially useful for various applications, which originate from the intrinsic random atomic configuration. but their plasticity is low and this disadvantage limites their applicable range as a engineering material. In this study we try to improve plasticity of metallic glasses by structural rejuvenation. Structural rejuvenation in metallic glasses by a thermal process (i.e. through recovery... 

The structural integrity of the sealing material is critical for the reliability of solid oxide fuel/electrolysis stacks. In this study, the mechanical properties of a rapid crystallizing glass of BaO-CaO-SiO2 system were evaluated. The crystallization as a determining factor in the mechanical behavior of the glass-ceramic sealant was investigated via high-temperature X-Ray diffraction spectrometer. Three- and four-point bending tests were carried out to measure the flexural strength (σ) of sealant material bars and head-to-head joined specimens at room- and high-temperatures. In addition, the elastic modulus (E) was measured by impulse excitation test up to 900 ºC. Also, the indentation... 

In present research, a cohesive based finite element model has been introduced to estimate median crack depth during mechanical machining on optical glasses. Development of the machining numerical model has been initiated by investigating the indentation process. Experimental results of this step have been calibrated primary numerical model which has been used in the scratch process. Due to differences between the scratch mechanism and indentation one, mathematical bases fracture formulas and cohesive relations have been developed. After extracting primary result, using them in the scratch model and developing the primary model, ultimately numerical model has been evolved to an abstract... 

Prestressed and reinforced concrete slabs are common structural elements that could be exposed to impact loading. Although, use of reinforced concrete slabs and utilization of Fiber Reinforced Polymer (FRP) as alternative to traditional steel reinforcement slabs are growing, but the influence of various parameters on their response under impact loads is not properly evaluated. In addition, studies on steel reinforced concrete slabs have been found in literature, but investigation of prestressed slabs and GFRP reinforced concrete slabs under impact load is limited. This study investigated the effect of rebar’s material, amount and arrangement of reinforcements, concrete strength and slab... 

The fiber-reinforced composite materials possess advantage for structural purpose in various industries. Delamination is recognized as one of the major causes of damage during drilling of fiber reinforced composites, which not only reduces the structural integrity, but also has the potential for long-term performance deterioration. It is difficult to produce precise quality holes with high efficiency by conventional drilling method. Drilling is frequently applied in production cycle while the anisotropy and nonhomogeneity of composite materials affect the chip deformation and machining behavior during drilling. In this thesis, a new non-traditional drilling technology is presented for solve... 

Today, microreactors come into focus due to their exclusive characteristics including high surface-to-volume, lower consumption of reagents and fast mixing. In this study, optimization of the Br-Li exchange reaction as a consecutive reaction using glass microreactor is investigated. To construct glass microreactor, laser ablation and thermal bonding method are utilized. In order to find the best yield and selectivity of the reaction, various parameters, such as solvent, equivalent ration of the two reagents, concentration of the reagents, residence time and flow rates of the reagents are examined. In addition, atomic force microscopy (AFM) analysis was used to determine the surface... 

The present paper is an attempt to critically measure interfacial tension with microchannels and achieve the quantity of adsorption in the liquid – liquid interfaces and comparing the adsorption of surfactants and nanoparticles surface modificated as well. At this point we need to make emulsion and it is necessary for droplets to be monodispersed due to analyze these droplets in this paper. According to this condition for our droplets microsystems are the best options. As we know surfactants were already known as a stabilizing emulsion agent and in this paper nanoparticles are suggested as suitable alternatives for surfactants which can be absorbed as if they are in the water / oil... 

Polyamide 6 is one of the well-known and oldest engineering thermoplastics, which has many uses in the transportation, automotive, apparel and sports industries due to its high strength, high corrosion resistance and high service temperatures. Cite gears, radiator tank, cylinder head cap and fuel rails can be mentioned as Polyamide 6 applications in the automotive industry. Glass fibers are used as reinforcement in PA6 media in order to enhance mechanical properties like tensile and impact strength. Even though the glass fiber improves the mechanical properties of the components produced from fiber-reinforced composites, it increases the anisotropy properties of the material and making it... 

Execution speed seriously bothers application developers and users for wearable devices such as Google Glass. Intensive applications like Mobile Augmented Reality (MAR) suffer from significant delays when CPU is busy. Energy is another concern when the devices are in low battery level but users need them for urgency use. To ease such pains, one approach is to expand the computational power by cloud offloading. This paradigm works well when the available Internet access has enough bandwidth. Another way, however, is to leverage nearby devices for computation offloading, which is known as device-to-device (D2D) offloading. In this paper, we present Dandelion, a unified code offloading system... 

Today, with the development of micro-technology in chemical reactions, the use of appropriate systems for the separation and purification of synthesized chemicals seems to be necessary. In this study, the continuous synthesis of bromide-lithium exchange reaction and the separation of organic and aqueous phase products in micro systems was investigated.The method used to construct micro-separator and micro reactor, a laser engraving technique, and thermal bonding of glass to glass.In the first step, the factors affecting the separation of organic and aqueous phase in the capillary micro-separator, such as the width of the capillary, the length of the capillary, the number of capillaries and... 

This research studies the feasibility of the BK7 optical glass milling process with ultrasonic vibrations. Due to the fragility of glasses, especially optical glasses, machining is very sensitive and complex. For this reason, it is necessary to think for the glass machiners to minimize the defects and failures of the process. So far, efforts have been made to reduce the defects caused by machining on brittle materials, such as increasing the speed of the period, reducing the feed rate of the tool, changing the geometry and the type of tool, the type of process lubrication, etc. In addition, other operations performed to improve the surface of the glass are of better quality, using hybrid or... 

The main purpose of this project is synthesis of the silica nano-sheets by means of microfluidic techniques. Continuous process, precise control of reaction condition, and higher production rate can be considered as main pros of silica nano-sheets synthesized by microfluidic platforms. General method can be explain as follow: first two oleic and aqueous phase are injected to the microfluidic system, then oleic phase breaks down in aqueous phase drop-wisely and by performing sol-gel reaction on the oil-water interface a silica crust is made on oil droplets. Eventually, oil droplets are left the system and broken down and silica nano-sheets are made. FESEM and microscopic images of... 

Glass Fiber Reinforced Polymer (GFRP) bars with significant corrosion resistance lead to an improvement in the performance of concrete structures and a significant reduction in costs. High ratio of tensile strength to weight, non-conductive, and non-magnetic properties are other features of GFRP bars. Recent international design standards, such as ACI 440.1R-15 do not recommend including FRP reinforcement in compression, so they replace them by concrete in calculations. The purpose of this study was to investigate the effect of concentric and excentric axial loading on the axial capacity and ductility of GFRP reinforced concrete columns compared to steel reinforced concrete columns,... 

This study has investigated the effects of different environmental conditions on the bond at the interface between two fiber reinforced polymer (FRP) layers. A total of 945 single lap splice coupons with three bond length were made using wet lay-up technic. There were used three unidirectional fabrics and one type of epoxy resin. A Uniaxial tensile test was performed on samples after 2, 4, 12, 20, 28, 36 and 48 weeks of exposure. Also series of test were conducted in order to determine the minimum lap splice length of single splice FRP samples. The experimental results indicated reduction of bond strength in glass specimens that was 17 % after 48 weeks of exposure while for same amount of... 

Today, many evidences, including the distribution of galactic velocities, gravitational lensing observations, and the cosmic microwave background, show that there exist dark matter (non-baryon matter) in large-scale cosmological structures that are stable, free of charge and without color, which has gravitational interaction like normal matter. The hypothesis that weakly interacting massive particles (WIMPs) as a dark matter candidate with mass range of several tens of GeV to several teV and with the typical couplings of Electroweak order of magnitude, is an attractive and desirable model, Which naturally explains the density of cosmic dark matter in agreement with observations. Alongside... 

A total of twenty-four reinforced concrete arches with dimensions of 110 × 30 × 10 cm were casted, fabricated and tested. There are three variables, including: height to span ratio, longitudinal reinforcement ratio and arrangement and number of FRP layers.Based on results, with increasing height to span ratio, the efficiency of FRP strengthening method decreases. It is due to the fact that FRP materials inherently behave better in tension. From another point of view, in lower arches (L group) extrados bonding technic has better effect on increasing peak load of the arches, while in higher ones (H group) intrados bonding is discerned as the best method of strengthening. This paradoxical... 

Ultrasonically assisted machining process has been introduced as an effective solution to improve machining quality of mechanical parts. This study aims to reduce the drilling induced delamination to increase mechanical properties of CFRP laminates. Delamination decreases the strength of laminates under static and dynamic loads. Drilling parameters (feed and spindle speed) and ultrasonic vibrations amplitude are chosen as design experiment factors. Taguchi design of experiments method is used to study the effect of input factors on drilling thrust force, delamination factor and residual strength of drilled laminates. Input factors are in three levels and Taguchi L9 array is utilized. To... 

A total of four reinforced concrete slabs with dimension of 2200×1000×100 mm strengthened with different layers of GFRP sheets were fabricated and tested. A loading of the slabs was performed using displacement control approach.In addition, nonlinear finite element analysis (NLFEA) using ANSYS package was used to simulate the behavior of the test specimens. After reasonable validation of NLFEA with the experimental test results of companion slabs, NLFEA was expanded to provide a parametric study of sixty two slabs. Forty two numbers of these sixty two slabs were without any opening and were modeled for different type of concrete strength, ratio of length/wide for slabs, type of FRP, number... 

Delamination is a major problem in drilling of fiber-reinforced composite materials. Thrust force is an important factor leading to propagation of delamination during drilling process. One of effective methods to reduce machining forces is application of ultrasonic vibrations. In this study ultrasonic assisted drilling is applied to reduce thrust force in drilling of GFRP laminates. In order to conduct experiments a setup is designed and fabricated to apply both vibrations and rotation to drill bits. Using Taguchi method, a set of experiments is conducted with feed rate, spindle speed, point angle and ultrasonic vibration amplitude as control factors. The results show that applying... 

Concrete structures require reinforcement and retrofitting because of possible mistakes in design or calculation, inconformity between plan and implementation, change in occupancy or applied loads, and decay. Development in technology, production of materials, and new methods play important roles in development of structure construction and reinforcement methods. Emerge of new materials creates great demand in studying, surveying, and determining design characteristic and criteria for these materials. One of these materials is FRP composite which is used in concrete structure reinforcement in different ways. In this laboratory research, the effect of external wrapping by GFRP composite...