Sharif Digital Repository

In present work, hydroxyapatite nano-rods are synthesized using a simple sol-gel method with calcium nitrate and potassium dihydrogenphosphate as calcium and phosphorus precursors respectively and ammonia was used for adjusting the pH=9. To obtain rod shape hydroxyapaite powder, multi wall carbon nanotubes were added to the solution, nHA powder was calcinated at 60 and 450 ℃. In second step, chitosan-gelatin/nanoHA solution were prepared by blending chitosan and gelatin in different concentrations with nanoHA powder, then the solution was freeze dried to maintain a composite scaffold. The prepared HA powder and bio-composite scaffold were characterized by X-ray diffraction (XRD), field... 

At the first stage, chitosan-hydroxyapatite-multiwalled carbon nanotube (CH-HA-MWCNT) composite coatings were synthesized by electrophoretic deposition technique (EPD) on Ti6Al4V and 316L stainless steel substrates at different levels of pH and characterized by X-ray diffraction (XRD), Raman spectroscopy, FTIR and field emission scanning electron microscopy (FESEM). A smooth distribution of HA and MWCNT particles in a chitosan matrix with strong interfacial bonding was obtained. At the second stage, effect of pH and MWCNT content of the suspension on corrosion behavior and mechanism of deposition were studied. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)... 

In this project ,it has been done different surface treatment on 6 samples of nitinol with 40 % prosity,three of them are anodized by H2SO4 ,Hf, Acetic acid, one of them is treated with plasma spray with TIO2 powder, one of them is putted in the furnace at 700 degrees for an hour, and the last one is bare ; Moreover, these treated samples are putted in Simulated body fluid for 16 days . After this period of time, we analyzed the results. Then the cell adhesion amount of osteo blast cells (MG 63) is measured to these samples by immersing them for 3 days in these cells.The results are investigated by SEM ,XRD(X pertpro produced by Panalitical), XRF(530-XRF-01), AAS( AA240), Roughness measuring... 

In this research, role of zirconia nanoparticles as a biocompatible material which has great mechanical properties, was investigated on corrosion behavior and bonding strength of HA coating. HA- ZrO2 composite prepared by a 2-step pulse electrodeposition method. Effect of pH (3.5, 4.5), bath temperature (60, 80 ͦC), current density (0.5, 1, 2 mA/cm2) and zirconia concentration (5, 10, 15 g/L) on coating characteristics were studied. X-ray diffraction was employed for phase analysis. Morphology and microstructure of samples observed utilizing scanning electron microscope (SEM) and elemental analysis was done by EDS. In order to corrosion studies electrochemical impedance spectroscopy (EIS)... 

The main purpose of this research is design and manufacture of nanostructured hydroxyapatite-coated foamy core@compact shell Ti-6Al-4V bone-like composites for utilization as substitutive implant for cortical bone having porous core. The production procedure consist of two steps; (a) fabrication of foamy core@compact shell Ti-6Al-4V alloy using powder metallurgy-space holder technique, (b) precipitation of hydroxyapatite on the Ti-6Al-4V alloy specimens via pulse electrodeposition process. The bone-like structures were designed to reduce the stress shielding which ensures long-term stabilization of implants. It is while that, the hydroxyapatite coating improve the biological response of... 

Metallic implants are useful in dental and orthopedic applications. Bio coating is necessary to improve bio-compatibility and bio-activation of metallic implants. For this goal, HA is the most important material. In this research, the goal is to improve bio-compatibility of St. St 316 by coating HA, HA-ZrO2, HA-TiO2, HA-ZrO2-TiO2 using combination of electrodeposition and electrophoretic methods. To form HA, calcium and phosphor salt solution was used then ZrO2- TiO2 nanoparticles was added to solution. In order to analyst the coatings different tests were done. Thickness analysis, XRD, FT-IR, FE-SEM and EDS, bonding Strength, Polarization test, bio-compatibility and surface roughness... 

This work describes the effect of hydroxyapatite with different morphology including nanorods and whisker on the properties of hydroxyapatite/polycaprolactone (HA/PCL) composite. Biodegradable polymer/Hydroxyapatite (HA) composites with the morphology of nanorods and whisker of (HA) as bone replacement scaffolds are synthesized by sol-gel and hydrothermal methods, respectively with a Ca/P ratio of 1.67 and 20:80 (HA/PCL).The crystallization behavior and porosity of HA/PCL composite are studied by scanning electron microscope and X-Ray diffraction. The response of bone marrow-derived human mesenchymal stem cells (hMSCs) in terms of cell proliferation and differentiation to the osteoblastic... 

Hydroxyapatite is the most substantial inorganic constituent of bone tissue which displays splendid biocompability and bioactivity. Nevertheless, its mechanical properties is not utmost appropriate for a bone substitutes. Therefore, it is used to improve the mechanical properties of polymer matrix composite scaffolds. In the present work polycaprolactone as a polymeric matrix was employed to fabricate hydroxyapatite-polycaprolactone biocomposite scaffolds via in situ route. Solvothermal method was employed to synthesize in situ hydroxyapatite in polymer matrix. Porous scaffolds were fabricated via freeze-drying/porogen leaching. Physical, mechanical (compressive module and compressive... 

Magnesium is one of most important elements in bio hedroxyapatite. Magnesium effects on all stages of bone growth metabolism. Also increases bone’s osteoblastic and osteoclastic activities. That’s why incorporation of Mg ions into hudroxyapatite structure has become one of interesting fields for bone implants production. In addition Mg can improve sintering and mechanical properties of HAp. Thet’s why in this investigation the effect of incorporated Mg into HAp structure has been studied. Three kinds of powders have been prepared to perform this study. Pure HAp nano powder produced via sol-gel method, Mg contain HAp nano powder produced via sol-gel method and a mixture of nano HAp and nano... 

Magnesium and its alloys are biodegradable materials with mechanical properties similar to the bone tissue, therefore these materials are suitable for producing orthopedic implants. Unfortunately Magnesium and its alloys are corroded too fast in physiological environment which is the main obstacle for usage of these materials as orthopedic implants. Producing Hydroxyapatite(HA) coatings on surface of Magnesium and its alloys is one of the popular and useful methods for reducing the corrosion rate in physiological environment. HA is a biocompatible and bioactive coating with the ability to bond chemically with the bone tissue and therefore it is largely used as a bioactive coating on the... 

Magnesium and its alloys are potentialy biodegradable implant materials due to their attractive biological properties. But their poor corrosion resistance may result in sudden failure of the implants. Recently, many researchers have focused on applications of fluorine-doped hydroxyapatiteCa10(PO4)6(OH)2−xFx (FHA, x is the degree of fluoridation) as a bioactive coating to provide early stability and long-term performance. In comparison with pure HA coating,FHA coating could provide significant dissolution-resistant property, better apatite-like layer deposition, better protein adsorption, better cell attachment and improved alkaline phosphatase activity in cell culture. In this... 

The use of dental implants has grown considerably in recent years in Iran but this piece is the industrial imported parts that are not yet produced in Iran. So the main purpose of this research was to fabricate a dental implant from Ti-6Al-4V alloy by CNC machining techniques. On the other hand, the poor bonding strength of bioactive coatings and low cell growth on the surface of uncoated implants are the common problems in the use of dental implants. So another aim of this study was to investigate the effect of Nanoscale surface topography and nanostructured coatings on the surface modification of titanium implant in order to improve Osseointegration and the bonding strength of bioactive... 

Zirconia toughened alumina (ZTA) Nanocomposites were prepared using nano sized Zirconia (ZrO2) powders doped with 3% mol of yttria (Y2O3) nanopowders and the sintering behavior at different temperature (1450 °C, 1550 °C and 1650 °C) were studied. The ZTA composite with different amount of partially stabilized Zirconia (PSZ)(5, 10, 15 and 20% mol) were prepared via axial pressing and then sintered to achieve maximum densification. After that phase changes of the samples were monitored. SEM was used for microstructural study and hardness and fracture toughness were determined by means of Vickers indentation. X-ray diffraction pattern showed that at constant composition, tetragonal zirconia... 

There are many techniques that have been used to create hydroxyapatite nanoparticles coating on nanotubes. Electrophoretic deposition (EPD) is one of the methods that has advantages of short formation time, needs simple apparatus, little restriction of the shape of substrate, no requirement for binder burnout as the green coating contains few or no organics. In the research, first, titanium dioxide nanotubes were fabricated by anodic oxidation. Anodizing voltage effect on the morphology of nanotubes was evaluated. SEM images was shown that in the anodizing voltage 20V, nanotubes were the most regular. Then, Hydroxyapatite nanoparticles has been deposited onto nanotublar TiO2 by... 

Synthetic polymers have a high capacity to provide and manufacture the pieces used in tissue engineering. However, optimizing the biocompatibility, bioresorbableility and mechanical properties simultaneous with processability of material is complicated and requires a lot of effort at designing different parts of the system. On the other hand, due to existence of secondary bonds (such as metal-ligand coordination or hydrogen bond) supramolecular polymers are able to respond to some stimuli such as temperature, pH, or pressure, which is important in terms of dynamic nature of interaction between the living cells and the external matrix of cell. Recently there have been extensive studies on... 

The aim of this project is to load analgesic drug; Paracetamol on dental implant. The implant is titanium alloy (Ti-6Al-4V). There are two kinds of samples of anodized and HA coated onto anodized. They are in the shape of the sheets in this study. The electrodeposition and anodization carried out in order to treat the two samples. Nanotubes were formed during anodic oxidation of the samples in the 1M Ammonium sulfate (NH₄)₂SO4 and 5wt% Ammonium fluoride NH4F electrolyte. They are expected to play role of carrier for the model drug; paracetamol. The results showed that HA anodized Ti-6-4 has the ability to hold higher amounts of drug and also can keep the drug for a longer time than the...