Sharif Digital Repository

This work describes the effect of hydroxyapatite with different morphology including nanorods and whisker on the properties of hydroxyapatite/polycaprolactone (HA/PCL) composite. Biodegradable polymer/Hydroxyapatite (HA) composites with the morphology of nanorods and whisker of (HA) as bone replacement scaffolds are synthesized by sol-gel and hydrothermal methods, respectively with a Ca/P ratio of 1.67 and 20:80 (HA/PCL).The crystallization behavior and porosity of HA/PCL composite are studied by scanning electron microscope and X-Ray diffraction. The response of bone marrow-derived human mesenchymal stem cells (hMSCs) in terms of cell proliferation and differentiation to the osteoblastic... 

The aim of this project is to load analgesic drug; Paracetamol on dental implant. The implant is titanium alloy (Ti-6Al-4V). There are two kinds of samples of anodized and HA coated onto anodized. They are in the shape of the sheets in this study. The electrodeposition and anodization carried out in order to treat the two samples. Nanotubes were formed during anodic oxidation of the samples in the 1M Ammonium sulfate (NH₄)₂SO4 and 5wt% Ammonium fluoride NH4F electrolyte. They are expected to play role of carrier for the model drug; paracetamol. The results showed that HA anodized Ti-6-4 has the ability to hold higher amounts of drug and also can keep the drug for a longer time than the... 

This investigation presents synthesis and characterization of pure and monophasic hydroxyapatite (Ca10(PO4)6(OH)2; HA) Nanostructures prepared by coral and oyster shell powders heated at 800 oC for 8 h as precursor via precipitation method. The morphology of HA nanostructures was controlled in the presence of various surfactants such as SDS, CTAB and PVP. The HA Nanorods synthesized by SDS were applied to fabricate bone scaffolds. Particle sizes of the HA Nanoparticles were about 20-30 nm. Pours three-dimensional HA/Ge/CMC scaffolds cross-linked by citric and oxalic acids were synthesized. In order to increase the pore size of the scaffolds, NaCl with medium (180-250 µm) and large (420-500... 

The present study is work on fabrication and characterization of a chitosan/ gelatin/ Mg substituted hydroxyapatite nano composite scaffold for bone tissue engineering. At the first step pure and Mg-substituted hydroxyapatite (HA) (Ca10-xMgx(PO4) 6OH2) nano-hexagonal rods with 14–45 nmdiameter.for this, calcium nitrate, magnesium phosphate hydrate and potassium dihydrogenphosphate were used as precursors for Ca, Mg, and P, respectively. Calculated amounts of magnesium ions (Mg+2) especially from 0 to 8% (molar ratio) were incorporated as substituted into the calcium sol solution. Deionized water was used as a diluting media for HA sol preparation and ammonia was used to adjust the pH= 9.... 

In present work, hydroxyapatite nano-rods are synthesized using a simple sol-gel method with calcium nitrate and potassium dihydrogenphosphate as calcium and phosphorus precursors respectively and ammonia was used for adjusting the pH=9. To obtain rod shape hydroxyapaite powder, multi wall carbon nanotubes were added to the solution, nHA powder was calcinated at 60 and 450 ℃. In second step, chitosan-gelatin/nanoHA solution were prepared by blending chitosan and gelatin in different concentrations with nanoHA powder, then the solution was freeze dried to maintain a composite scaffold. The prepared HA powder and bio-composite scaffold were characterized by X-ray diffraction (XRD), field... 

Plasma electrolyte oxidation process is one of the surface coating methods which is recommended to use as a surface preparation before applying the final coating on magnesium alloys due to its unique properties such as excellent adhesion.The aim of this study was to create an oxide layer on the AZ91 substrate and after optimizing the PEO coating conditions and choosing the best coating in order to increase adhesion and corrosion resistance, the composite coating of graphene oxide, hydroxyapatite and chitosan was applied by electrophoretic method. After studying the morphology of PEO oxide coating at current densities of 0.25, 0.35, 0.4, 0.5 and 0.6 amp/cm2 during times of 5 and 8 minutes, it... 

In this research, it has been tried to use alumina and magnesia nanoparticles to hydroxyapatite nano powder, a three-component coating, with corrosion resistance, adhesion and desirable biocompatibility on the 316 stainless steel substrate, by electrophoretic method. It should be applied at 3 voltages of 10, 30 and 50 volts and for 3 minutes. TEA was used as a dispersing agent and ethanol as a solvent to prepare the suspension. Alumina nano powder was added to nanohydroxyapat in two amounts of 10 and 20% by weight and 20% was optimized as the amount, and magnesia nano powder was added to the composition in three amounts of 1, 3 and 5% by weight, which was 3% by weight of the results Was... 

Implant primary stability is a crucial component of implant survival. Primary mechanical stability is correlated with implant type, surgical technique, quantity and quality of bone at the recipient site. Since bone integration (BI) significance has been acknowledged, a variety of techniques have been developed to quicken BI and achieve faster fixation. Studies have shown that material type, and many surface properties, including as surface composition, roughness, topography, and energy, have a significant influence during the early stages of bone integration to the implant. In this work, we did synthesis one-dimensional nanoneedle-like arrays of hydroxyapatite using the injection method... 

Bone scaffolds are used to regenerate bone tissue and accelerate bone healing, for this purpose, an attempt was made to prepare biocompatible, biodegradable, low toxicity and non-allergenic scaffolds to help increase osteogenesis and improve bone infections. A porous multi-component composite of chitosan, hydroxyapatite, graphene oxide functionalized with silver was made to make the desired scaffolds. At first, graphene oxide was functionalized by silver ions using silver nitrate. The structure of silver graphene oxide nanocomposite was confirmed by scanning electron microscope (SEM), Fourier infrared spectroscopy (FT-IR), and ultraviolet (UV-Visible) spectroscopy. In the next step, a... 

This study investigates the effect of adding hydroxyapatite nanoparticles and multi-walled carbon nanotubes in pure and modified form on the flexural properties and hardness of denture base Polymethyl Methacrylate. Polymethyl Methacrylate (PMMA) is still the most common denture base material. In fact, the mechanical properties of this resin have played a significant role in expanding its use in dentistry. But in the long-term use of resins, defects such as low resistance to crack growth, low flexural strength and brittleness can be seen. In fact, flexural fatigue occurs as a result of repeated flexural stresses, and it can be described as the main reason for crack growth and propagation in... 

Hydroxyapatite-Graphene Nanocomposite coatings were formed on Ti-6Al-4V alloy by Plasma electrolytic oxidation. PEO electrolyte contains calcium acetate and calcium glycerophosphate. The effect of adding graphene to PEO electrolyte on the corrosion, mechanical, and biocompatibility properties of the coating investigated. Before adding graphene to the electrolyte, working parameters such as voltage, current density, process time were optimized using scanning electron microscopy (SEM), potentiodynamic polarization test, and thickness measurement. Examination of the coating morphology showed that due to thermal stresses, surface cracks formed at Voltages above 350 V. The results of the... 

This study investigates the effect of titanium dioxide and magnesium oxide additives on hydroxyapatite synthesized by sol-gel and composite with the predominant phase of hydroxyapatite by in situ method to improve mechanical properties. Scaffold samples were synthesized with nanometer-sized hydroxyapatite and composite powder particles by gel casting and sintered at 1200 ° C. Then, to evaluate the synthesized powders, simultaneous thermal analysis (STA), X-ray diffraction test, FTIR test, FESEM, EDS, and MAP analysis were used. Also, to evaluate the mechanical properties of the scaffolds, a compressive test was used, and to evaluate the scaffolds' density, the Archimedes method was used.... 

In the preceding years, hydroxyapatite (HA)-based coatings and scaffolds have been known as the best biomaterials for dental and orthopedics applications. Biocompatible and bioactive hydroxyapatite-based Coatings on metallic implants is one of the best methods for reaching both suitable mechanical properties and appropriate bioactivity, leading to better osseointegration and osteoblast proliferation. The ultimate goal of this project is characterization as well as mechanical and electrochemical behavior investigation of Hydroxyapatite- Chitosan nanocomposite coating by electrophoretic deposition (EPD) method on Plasma Electrolyte Oxidation (PEO) treated titanium substrates and Magnesium (Mg)... 

Hydroxyapatite is the most substantial inorganic component of bone tissue which displays great biocompability and bioactivity. Nevertheless, its mechanical properties is not appropriate for a bone substitiues. Therefore, it is used to improve the mechanical properties of polymer matrix composite scaffolds. In the present work chitosan as a polymeric matrix was employed to fabricate hydroxyapatite- chitosan biocomposite scaffolds. Sol-Gel method was employed to synthesize hydroxyapatite nano particles. Porous scaffolds were fabricated via freeze-drying by introducing two different cross linkers, Glutaraldehyde and Sodium Tripolyphosphate. Mechanical (compressive strength), biocampability and... 

Medical engineering advances in total joint replacements and society’s rising demand for long lasting materials, have proven it essential to manufacture materials that are more similar to the original tissue in the fields of mechanical, tribological and biological properties. Ultra High Molecular Weight Polyethylene(UHMWPE), is a polymer widely used in arthroplasty applications due to its biocompatibility, chemical stability and proper mechanical properties. In this study, UHMWPE-HAp nanocomposites reinforced with Zirconia and Graphene were manufactured aiming to reach a structure that is more compatible with bone tissue and also to improve overall properties. First, using ultrasonication... 

With the increase in the average age of the world's population, osteoporosis is a worldwide incidence. This disease, along with natural disasters, are important factors in the occurrence of fractures in various bones of the body. One of the methods for solving this problem and replacing with broken body bones is the use of metal implants with hydroxyapatite-based coatings. One of the common problems with using implants in the body is the infection in the adjacent parts of the implant. To overcome this problem, several studies have been carried out on the use of hydroxyapatite coatings with metal ions or antibacterial oxide compounds. In the present study, the influence of factors such as the... 

In this project, a ceramic biocompatible coating was applied on Titanium which is included Hydroxyapatite by AC Plasma Electrolyte Oxidation method. First, coating was performed in 5 different solutions and various duration in 500mA/Cm2 as a current density. Then, by microscopic and macroscopic images and size of porosity and also thickness of coat, 3 solutions were chosen for adding nanoparticles: Solution 1 which includes NaH2PO4 and Ca(CH3COO)2 , Solution 3 which includes Ca(CH3COO)2 and Na-Beta G and Solution 4 which includes Ca(H2PO4)2, HMP, NA2(EDTA) and Ca(CH3COO)2 . Also the time 10 minutes was chose as a appropriate time. The average of the porosities size in solution 1 was about... 

In this study, biocompatible ceramic coating, containing hydroxyapatite particles (HA), was successfully created by AC anodizing, on the surface of commercially pure titanium grades 2. Coating process basically consisted of three methods. In Method 1, samples were anodized in a salty electrolyte containing calcium – phosphate base and in method 2 samples were anodized as initial process, following cathodic polarisation deposition of HA particles. Finally in method 3, samples were anodized in an electrolyte containing of HA particles suspension.Parameters such as current density and time of anodizing process, in first procedure, and time of cathodic deposition process in second procedure, and... 

Metallic implants are useful in dental and orthopedic applications. Bio coating is necessary to improve bio-compatibility and bio-activation of metallic implants. For this goal, HA is the most important material. In this research, the goal is to improve bio-compatibility of St. St 316 by coating HA, HA-ZrO2, HA-TiO2, HA-ZrO2-TiO2 using combination of electrodeposition and electrophoretic methods. To form HA, calcium and phosphor salt solution was used then ZrO2- TiO2 nanoparticles was added to solution. In order to analyst the coatings different tests were done. Thickness analysis, XRD, FT-IR, FE-SEM and EDS, bonding Strength, Polarization test, bio-compatibility and surface roughness... 

Tissue regeneration by bio-compatible/degradable scaffolds is one of the widely used approaches in the field of tissue engineering. In this study, a thermoplastic starch based nanocomposite scaffold with gradient structure was fabricated by unidirectional freeze drying method. To increase the stability of the scaffold in the aqueous media, PVA was added to starch solution. Then, the PVA and starch molecules were cross-linked by adding citric acid to the mixture. On the one hand, to improve the mechanical properties of the scaffold, and control its bio-degradability on the other, cellulose nano-fibers were employed. Also, the bioactivity of the scaffold was induced by using hydroxyapatite...