Sharif Digital Repository

In the current work, the performance of untreated nanodiamonds (UNDs) and thermally oxidized nanodiamonds (ONDs), as adsorbents for selective adsorption of methylene blue (MB) and methyl orange (MO) from aqueous media, was examined. The adsorption isotherm, initial pH, ionic strength, and thermodynamic study were investigated in batch experiments. The equilibrium adsorption data were analyzed by Langmuir and Freundlich isotherm models, which indicated that the isotherms were well fitted with the Langmuir model for both dyes. Thermodynamic parameters indicated that the adsorption operation was a feasible, spontaneous, and physisorption process in experimental conditions. Meanwhile, the... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

In this study, the impacts of salinity, ion type, and aging process were investigated on coalescence and spreading of crude oil interfaces (including an oil droplet and an oil film) under gravity, through drop rest time measurement techniques, aided by an image analysis system. Three different salt solutions of NaCl, Na2SO4, and MgCl2 were studied at different ionic strengths, ranged from 1% to 150% of Persian Gulf seawater ionic strength. According to the results, aging the oil droplet in the brine increased the interfacial rigidity. Addition of a gas phase - by thinning the surface oil film - almost doubled both rest time and spreading time values. In the aged mode, the presence of salt in... 

In this research, UiO-66 and its composite nanoparticles with thermally oxidized nanodiamond (OND) were synthesized via a simple solvothermal method and utilized as solid adsorbent for the removal of anionic methyl red (MR) dye and cationic malachite green (MG) dye from contaminated water. The synthesized adsorbents were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), N2 adsorption–desorption, and zeta potential analyzer. The influences of various factors such as initial concentrations of the dyes, adsorption process time, solution pH, solution temperature and ionic... 

A multi-residue method using gas chromatography coupled with flame ionisation detector has been developed for simultaneous determination of 10 pesticides in milk. The methodology involved a sample clean-up procedure using ‘quick, easy, cheap, effective, rugged and safe’ followed by a preconcentration step based on dispersive liquid–liquid microextraction. In this regard, acetonitrile was added to the milk sample with specific pH and ionic strength, and the mixture was rigorously shaken. The extracts were centrifuged; then, the organic phase (acetonitrile) was transferred to a test tube and was mixed with deionised water. The mixture was sonicated and chloroform was added as an acceptor phase... 

Engineered water (EW) flooding is one of the enhanced oil recovery (EOR) techniques in carbonate reservoirs. In this method, the wettability of reservoir rock is altered by controlling the amount of various ions in the injected brine. The thermodynamics of wettability is related to the surface interactions and stability of water film on a rock surface. It can be identified by calculating disjoining pressure isotherms. In this study, core flooding tests, contact angle and zeta potential measurements along with the disjoining pressure isotherm calculation by the DLVO theory were used to investigate the wettability alteration of dolomite rock. Four brines include reservoir formation water... 

A novel amino-functionalized polymer was synthesized using 3-(trimethoxysilyl) propyl amine (TMSPA) as precursor and hydroxy-terminated polydimethylsiloxane (OH-PDMS) by sol-gel technology and coated on fused-silica fiber. The synthesis was designed in a way to impart polar moiety into the coating network. The scanning electron microscopy (SEM) images of this new coating showed the homogeneity and the porous surface structure of the film. The efficiency of new coating was investigated for headspace solid-phase microextraction (SPME) of some environmentally important chlorophenols from aqueous samples followed by gas chromatography-mass spectrometry (GC-MS) analysis. Effect of different... 

The water-soluble cobalt(II) tetradentate Schiff base complex [Co(II)L](ClO4)2, L: (N,N′-bis{5-[(triphenylphosphonium)-methyl]salicylidine}-o-phenylenediamineperchlorate has been synthesized and characterized. This complex forms charge transfer (CT) complexes with imidazole and 1-methylimidazole. The formation constant, molar absorptivity (ε′), and thermodynamic parameters for charge transfer complexes formation of cobalt(II) Schiff base complexes with imidazole derivatives were determined by using UV-vis spectrophotometric method in aqueous solutions at constant ionic strength (I = 0.2 mol dm-3 KNO3) at pH 6.0 and various temperatures between 292 and 315 K. © 2007 Elsevier B.V. All rights... 

A headspace solid-phase microextraction (HS-SPME) method was developed for the trace determination of geosmin in water and apple juice samples. A poly(dimethylsiloxane) (PDMS) fiber was synthesized as coated fiber using sol-gel methodology. After performing the extraction in the headspace, the fiber was introduced directly into the injection port of a gas chromatography-mass spectrometry (GC-MS) using electron impact (EI) ionization mode. One-at-the-time optimization strategy was applied to investigate and optimize important extraction parameters such as extraction temperature and time, ionic strength, headspace volume, and desorption temperature and time. The analytical data exhibited an... 

A headspace solvent microextraction method was developed for the trace determination of geosmin, an odorant compound, in water samples. After performing the extraction by a microdrop of an organic solvent, the microdrop was introduced directly into a GC-MS injection port. One-at-the-time optimization strategy was applied to investigate and optimize some important extraction parameters such as type of solvent, drop volume, temperature, stirring rate, ionic strength, sample volume, and extraction time. The analytical data exhibited an RSD of less than 5% (n = 5), a linear calibration range of 5-900 ng/L (r2 > 0.998), and a detection limit of 0.8 and 3.3 ng/L using two different sets of... 

Water-soluble cobalt(II) tetradentate Schiff base complexes have been shown to form charge transfer (CT) complexes with a series of nucleoside monophosphates including adenosine-5′-monophosphate (AMP) and cytidine-5′-monophosphate (CMP). The investigated water-soluble cobalt(II) Schiff base complexes are (i) disodium[{bis(5-sulfo-salicylaldehyde)-o-phenylenediiminato}cobalt(II)], Na 2[Co(SO3-salophen)] (1); (ii) disodium[{bis(5-sulfo-salicylaldehyde)-4,5-dimethyl-o-phenylenediiminato} cobalt(II)], Na2[Co(SO3-sal-4,5-dmophen)] (2) and (iii) disodium[{bis(4-methoxy-5-sulfo-salicylaldehyde)-4, 5-dimethyl-o-phenylenediiminato}cobalt(II)], Na2[Co(SO 3-4-meosal-4,5-dmophen)] (3). The formation... 

In this paper, the performance of three imidazolium-based ionic liquids (ILs) including 1-hexyl-3-methylimidazolium chloride ([HMIM][Cl] or IL6), 1-octyl-3-methylimidazolium chloride ([OMIM][Cl] or IL8), and 1- dodecyl-3-methylimidazolium chloride ([DMIM][Cl] or IL12) in reducing the interfacial tension (IFT) between crude oil and IL solutions was analyzed for the first time under a wide range of salinities (1000 to 195 476 ppm) at a reservoir temperature of 80 °C. The purpose was to microscopically analyze the occurring phenomenon at the fluid-fluid interface to determine the mechanism leading to oil extraction and to address the existing ambiguities in the literature concerning the... 

Wettability alteration is the principal low-salinity-effect (LSE) in many oil-brine-rock (OBR) systems. Our recent experimental results have demonstrated that wettability alteration by low salinity is slow. It is expected that the electrical behavior of oil/brine and rock/brine interfaces and the water film geometry control both the transient hydrodynamic pressure, and the time-scale of ionic transport in the film, thus the kinetics and degree of wettability alteration. In this paper, the electro-diffusion process induced by the imposed ionic strength gradient is simulated by solving Poisson-Nernst-Planck equations in a water film bound between two charged surfaces, using a finite... 

The functionality of multi-stimuli-responsive hydrogels in physiological states is the reason for the increased attention of hydrogels nowadays. Multi-stimuli-responsive hydrogels exhibit tunable changes in swelling or mechanical properties in response to predetermined combinations of stimuli such as pH, temperature, ionic strength, electric field, magnetic field, light, chemical triggers, enzyme concentration, redox species, reactive oxygen species (ROS), and glucose levels. This review summarizes the recent advances in multi-stimuli-responsive hydrogels used in medical approaches. The first part of the review highlights the medical applications of polymer-based and supramolecular hydrogels... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

In this study, a series of highly swelling hydrogels based on sodium alginate (NaAlg) and polymethacrylamide (PMAM) was prepared through free radical polymerization. The graft copolymerization reaction was performed in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N'-methylenebisacrylamide (MBA) as a crosslinker. The crosslinked graft copolymer, alginate-graft-polymethacrylamide (Alg-g-PMAM), was then partially hydrolyzed by NaOH solution to yield a hydrogel, hydrolyzed alginate-graft-polymethacrylamide (H-Alg-g-PMAM). During alkaline hydrolysis, the carboxamide groups of Alg-g-PMAM were converted into hydrophilic carboxylate anions. Either the... 

The formation constants for 1:1 molecular complex formation between water-soluble cobalt(II) tetradentate Schiff base complex, disodium[{bis(4- methoxy-5-sulfo-salicylaldehyde)-4,5-dimethyl-o-phenylenediiminato}cobalt(II)], Na2[Co(SO3-4-meosal-4,5-dmophen)], and nucleotides, adenosine-5′-triphosphate (ATP) and cytidine-5′-triphosphate (CTP), in mixed solvent systems of ethanol and water with different volume fractions of ethanol and water have been determined spectrophotometrically at constant ionic strength (I = 0.2 mol dm-3 NaClO4) and temperature 278 K. Trends in the values of formation constants according to the volume fractions of ethanol and water in ethanol and water mixed solvent...