Loading...
Search for: mass-transfer
0.009 seconds
Total 274 records

    Gas absorption enhancement in hollow fiber membrane contactors using nanofluids: Modeling and simulation

    , Article Chemical Engineering and Processing: Process Intensification ; Volume 119 , 2017 , Pages 7-15 ; 02552701 (ISSN) Darabi, M ; Rahimi, M ; Molaei Dehkordi, A ; Sharif University of Technology
    Elsevier B.V  2017
    Abstract
    In this article, a comprehensive 2D mathematical model has been developed to simulate process intensification of carbon dioxide absorption in the presence of nanoparticles in hollow fiber membrane contactors (HFMCs). The influences of nanoparticle were taken into account considering Brownian motion and Grazing effect as dominant phenomena of mass-transfer enhancement in nanofluids. The obtained simulation results were validated against experimental data reported in the literature and excellent agreement was obtained. It was found that by adding 0.05 wt % silica nanoparticles, the absorption rate could be enhanced by 16%, while the corresponding value is 32% for CNT nanoparticles. High... 

    Mass transfer evaluation in a multi-impeller extractor for reactive Mo (VI) extraction from aqueous Sulphate solution by utilizing coupling of acid and solvating Extractants

    , Article Heat and Mass Transfer/Waerme- und Stoffuebertragung ; Volume 56, Issue 6 , 2020 , Pages 1995-2006 Shakib, B ; Torab Mostaedi, M ; Outokesh, M ; Asadollahzadeh, M ; Sharif University of Technology
    Springer  2020
    Abstract
    In this study, mass transfer experimental data from the present column with 70 cm active column length and 11.3 cm internal diameter were interpreted for molybdenum extraction with a mixture of D2EHPA and TBP in terms of the axial diffusion model. The influence of extractants concentration and the initial aqueous pH have studied in the bench-scale experiments. The experimental finding demonstrated that the synergistic solvent extraction increases the constancy of the extracted complexes for transfer into the organic phase. The effect of operating parameters, including agitation speed and inlet phase velocities on the overall mass transfer coefficients under the chemical reaction system, is... 

    Mhd flow of cu-al2o3/water hybrid nanofluid through a porous media

    , Article Journal of Porous Media ; Volume 24, Issue 7 , 2021 , Pages 61-73 ; 1091028X (ISSN) Ahmad, S ; Ali, K ; Ashraf, M ; Sharif University of Technology
    Begell House Inc  2021
    Abstract
    Hybrid nanoliquids comprise of better physical strength, mechanical resistance, thermal conductivity, and chemical stability as equated to individual nanoliquids. In this paper, MHD hybrid nanoparticle flow with heat and mass transfer attributes is numerically investigated. Flow is taken over a stretching surface embedded in a porous medium. The governing flow model partial differential equations (PDEs) are transformed into ordinary differential equations (ODEs) using a powerful tool of similarity transformations. The relevant system of differential equations and boundary conditions are numerically treated with the successive over-relaxation (SOR) technique. Heat and mass transfer features... 

    Mhd flow of cu-al2o3/water hybrid nanofluid through a porous media

    , Article Journal of Porous Media ; Volume 24, Issue 7 , 2021 , Pages 61-73 ; 1091028X (ISSN) Ahmad, S ; Ali, K ; Ashraf, M ; Sharif University of Technology
    Begell House Inc  2021
    Abstract
    Hybrid nanoliquids comprise of better physical strength, mechanical resistance, thermal conductivity, and chemical stability as equated to individual nanoliquids. In this paper, MHD hybrid nanoparticle flow with heat and mass transfer attributes is numerically investigated. Flow is taken over a stretching surface embedded in a porous medium. The governing flow model partial differential equations (PDEs) are transformed into ordinary differential equations (ODEs) using a powerful tool of similarity transformations. The relevant system of differential equations and boundary conditions are numerically treated with the successive over-relaxation (SOR) technique. Heat and mass transfer features... 

    Heat and mass transfer analysis and optimization of freeze desalination utilizing cold energy of LNG leaving a power generation cycle

    , Article Desalination ; Volume 527 , 2022 ; 00119164 (ISSN) Salakhi, M ; Eghtesad, A ; Afshin, H ; Sharif University of Technology
    Elsevier B.V  2022
    Abstract
    Freeze desalination (FD) works upon the separation of impurities from pure water during ice crystals formation. The required cold source could be supplied by the cold energy of liquefied natural gas (LNG). In the current study, freeze desalination of seawater is explored by directly exploiting the cold energy of LNG within an appropriate range of temperature after producing work in a power generation cycle. A detailed discussion has been given on the inlet temperature of LNG to the FD unit for the first time. The direct utilization has the privilege of eliminating the addition of a secondary refrigerant and its refrigeration cycle to the FD process. A multi-objective optimization is... 

    Combined model of mass-transfer coefficients for clean and contaminated liquid-liquid systems

    , Article Industrial and Engineering Chemistry Research ; Volume 50, Issue 8 , 2011 , Pages 4608-4617 ; 08885885 (ISSN) Haghdoost, A ; Dehkordi, A. M ; Darbandi, M ; Shahalami, M ; Saien, J ; Sharif University of Technology
    Abstract
    Mass-transfer rates to and from drops in liquid-liquid extraction processes are often reduced by the presence of contaminants. To design an industrial extractor, it is essential to consider this contamination effect in a quantitative manner. To achieve this goal, an experimental investigation was conducted on the mass transfer into single drops for n-butanol-succinic acid-water, as the recommended test system by the European Federation of Chemical Engineering (EFCE). The effects of anionic (sodium dodecyl sulfate, SDS), cationic (dodecyl trimethyl ammonium chloride, DTMAC), and nonionic (octylphenol decaethylene glycol ether, Triton X-100) surfactants on the hydrodynamic and mass-transfer... 

    Numerical Simulation of Cavitating Flows with Thermodynamic Effects

    , M.Sc. Thesis Sharif University of Technology Farajollahi, Amir Hamzeh (Author) ; Hejranfar, Kazem (Supervisor)
    Abstract
    In this study, the numerical simulation of cavitating flows for cryogens fluids is performed. The algorithm employs the homogenous, multiphase Euler/Navier-Stokes equations with the interface capturing method. The thermodynamic and thermal effects substantially impact the cavitation dynamics of cryogenic fluids and therefore these effects should be considered by solving the energy equation in conjunction with the mass and momentum conservation, and updating the fluid physical properties. Here, two cavitation modeling strategies, namely, the barotropic cavitation model and the transport equation-based model are used. Both laminar and turbulent cavitating flows are studied in this work. For... 

    Thermodynamic Aspect and Simulation of Oxygen Intravitreal Profile and its Effect on Cataract

    , M.Sc. Thesis Sharif University of Technology Safari Nore Eini, Hossein (Author) ; Abdekhodaie, Mohammad Jafar (Supervisor) ; Taghikhani, Vahid (Supervisor)
    Abstract
    Importance: Age related cataract is the major cause of blindness worldwide.in recent years several studies has been done with the aim of understanding the cataract process, but no attempts has been done for simulation and study of the vitreous aging and its effect on cataract.
    Objective: To investigation and determination of effective mechanism for increasing oxygen in vitreous humor and simulation the oxygen tension changes with vitreous degeneration with age or vitrectomy.Methods: Effects of changes in chemical composition of vitreous humor with age or vitrectomy on oxygen solubility is studied by thermodynamic relations. The posterior segment of the eye is modeled using transport... 

    Synthesis and Surface Treatment of Nanoparticles to Evaluate the Effect of Their Presence on the Mass Transfer in the Stirred Liquid-Liquid Extraction Systems

    , M.Sc. Thesis Sharif University of Technology Hatami, Ashkan (Author) ; Bastani, Daruoosh (Supervisor) ; Najafi, Farhod (Supervisor)
    Abstract
    In this study the effect of nanoparticles on the mass transfer of dispersed phase in the liquid-liquid extraction systems, containing toluene with acetic acid as dispersed phase and saturated water of toluene as continues phase was investigated. For the ease of dispersion of nanoparticles in nonpolar organic dispersed phase, with the use of a novel method, hydrophobic tiania nanoparticles were synthesized and during producing with the sole-gel method were modified by adding Tetraethyl Ortho titanate as modifying agent, also the smallest hydrophobic nanoparticles of magnetite were synthesized by co-precipitating method and then, under optimum thermal condition were coated by adding Oleic... 

    Numerical and Analytical Study of Mixing in Y-shaped Micromixers: Electroosmotic and Poiseuille Flow of PTT Fluids

    , M.Sc. Thesis Sharif University of Technology Reshadi, Milad (Author) ; Saeedi, Mohammad Hassan (Supervisor) ; Mozaffari, Ali Asghar (Supervisor)
    Abstract
    Dissemination of an analyte under the laminar flows plays a major role in measuring and assessment of biological fluids such as sample preparation in the context of microfluidic systems. Due to the development of manufacturing technology in the Lab-on-a-chip devices, the production of rectangular microchannels with finite aspect ratios and micron and submicron sizes has been provided by which the effect of electrokinetic phenomena on concentration distribution will be magnified in these systems. On the other hand, these biofluids are viscoelastic and show extraordinary flow behaviors, not existing in Newtonian fluids and adopting appropriate constitutive equations these exotic flow behaviors... 

    Study on the Mass Transfer and Isotope Separation Phenomena in a Gas Centrifuge by Using FEREON Mixtures as Model Compounds

    , M.Sc. Thesis Sharif University of Technology Fard Kashani, Mohammad Reza (Author) ; Outokesh, Mohammad (Supervisor) ; Karimi-Sabet, Javad (Supervisor) ; Norouzi, Ali (Co-Advisor)
    Abstract
    In the nuclear industry, gas centrifuges are considered of high importance for the purpose of uranium enrichment. Today, with advances in science and technology, the use of gas centrifuges for separating isotopes other than uranium, is so common. With respect to the use of conventional methods such as Pancake equation in calculating the velocity profile in centrifuges, it is needed that A^2=(MV^2)/2RT≫1 (M: Feed molecular weight; V: Peripheral speed of centrifuge; T: Mean temperature of feed; R: The universal constant of gases). While the molecular weight of the feed mixture gets lower, the A2 parameter gets closer to one. So, other methods for modeling the behavior of the gas in the... 

    Pore Scale Modeling and Upscaling of Non-Aqueous Phase Liquid Dissolution, Flow and Distribution in Heterogeneous Porous Media

    , M.Sc. Thesis Sharif University of Technology Khasi, Saeed (Author) ; Ghazanfari, Mohammad Hossein (Supervisor)
    Abstract
    In this work, flow transport, distribution, and dissolution of non-aqueous phase liquids (NAPLs) in heterogeneous porous media were modeled by focusing on the dissolution process in pore-level and field scale. First, by adopting advection-diffusion and mass transfer equations, dissolution process and NAPL distribution were investigated in a heterogeneous porous media using pore network modeling. The 2-D developed model was based on observations of micromodel tests. The pore scale simulator which adopted by this work was improved in some aspects in comparison to previous models in the literatures. First, in the phase displacement, by considering more realistic geometries for pore structure... 

    Modeling of Deposition of Low Density Lipoprotein (LDL) in Carotid Artery

    , M.Sc. Thesis Sharif University of Technology Mirbagheri, Amir (Author) ; Saeedi, Mohammad Saeed (Supervisor)
    Abstract
    Atherosclerosis is one of the most important and common causes of death in the world. Atherosclerosis typically affects medium and large arteries in the body and it leads to plaque formation in arterial wall. The first stage of plaque formation has been related to accumulation of low density lipoproteins in arterial wall.
    The purpose of this research is presenting a four-layer model to describe the LDL transport in the arterial wall. The endothelium, intima, internal elastic lamina (IEL) and media are all treated as macroscopically homogeneous porous media and the volume-averaged porous media equations are employed to model various layers. The physiological parameters within the various... 

    Modeling of Blood Flow and Deposition of Low Density Lipoprotein (LDL) in Coronary Arteries

    , M.Sc. Thesis Sharif University of Technology Emami Meybodi, Ali (Author) ; Firoozabadi, Bahar (Supervisor) ; Saidi, Mohammad Said (Co-Advisor)
    Abstract
    In this thesis, hemodynamic parameters of flow and deposition of low density lipoproteins (LDL) on wall of coronary arteries with taking into account their curvature on the heart are studied. At first, numerical solution of the blood flow by assumption of blood as incompressible and Newtonian fluid for steady and pulsatile inlet is done. Then by assuming LDL particles as dilute solute in the blood, LDL transport from artery lumen into arterial wall is studied. LDL accumulation and penetration into the vessel wall cause thickening of the walls and eventually eclipse it and its known as the first stage of atherosclerosis disease. The results show that low shear region occurs on inner wall... 

    Simulation of Flow and Mass Transfer in Microfluidic Systems of Human Body

    , Ph.D. Dissertation Sharif University of Technology Saadatmand, Maryam (Author) ; Abd Khodaei, Mohammad Jafar (Supervisor) ; Farhadi, Fathollah (Supervisor) ; Pishvaie, Mahmoud Reza (Supervisor)
    Abstract
    The effects of gravity and inertia dominate our experiences of the physical world. But as systems are reduced in size, phenomena such as diffusion, surface tension and viscosity become ever more important; at the microscale they can dominate and result in a world that operates very differently from the macroscopic world. Kidney is one of the vital organs in which fluid and mass transfer occur between blood flow in microvessels and urine in microchannels called nephron. The present work is aimed at applying microchannel theory to study renal system. First, a n efficient numerical orthogonal collocation method has been employed to solve the steady-state formulation of electrolyte transport in... 

    Drug Delivery into the Anterior Segment of the Eye

    , M.Sc. Thesis Sharif University of Technology Alavi Shoushtari, Navid (Author) ; Abdekhodaie, Mohammad Jafar (Supervisor) ; Bastani, Daruosh (Supervisor)
    Abstract
    Transport phenomena i.e. momentum, heat and mass transfer are occurring inside the eye constantly. Any disturbance in each of these could lead to diseases or ocular problems. Konwledge of transport phenomena can help surgeons and specialists to identify problems more easily and cure the problems effectively. Further more, these phenomena have a great impact on drug delivery inside the eye. Therefore deep understanding of them makes investigation of different therapies easy and convenient. Consequently this understanding could lead to choose the best method and route of administration available. A precise model which is in consistence with the real human eye has been developed and the ocular... 

    Transport Phenomena in Electrokinetically Generated Microflows

    , Ph.D. Dissertation Sharif University of Technology Sadeghi, Arman (Author) ; Saeedi, Mohammad Hassan (Supervisor) ; Mozaffari, Ali Asghar (Supervisor) ; Chakraborty, Suman (Co-Advisor)
    Abstract
    This is a theoretical study on heat and mass transfer in electrokinetically driven microfluidic devices with particular consideration to the lab-on-a-chip (LOC) applications. Special attention is given to disclose the effects of the fluid rheology and the aspect ratio of the rectangular geometry on the surface reaction kinetics and the temperature rise due to the Joule heating. Along this line, two different viscoelastic constitutive equations namely PTT and FENE-P models along with the power-law viscosity model are being considered. The secondary aims also include exploring the influences of the fluid properties variations throughout the channel cross section on the hydrodynamic and thermal... 

    Mass Transport Analysis of Non-Newtonian Fluids under Combined Electroosmotically and Pressure Driven Flow in Rectangular Microreactors

    , M.Sc. Thesis Sharif University of Technology Yousefian, Zakie (Author) ; Saidi, Mohammad Hassan (Supervisor)
    Abstract
    In recent two decades, with developments in micro and nano scale fabricating techniques, use of microfluidic systems is increasing in different fields. How to drive fluid is a hard question because of high pressure drop in micro scale. Different methods has been suggested to solve this problem, among which, electroosmotic pump is preferred because of its advantages. One of the main applications of microsystems is in biomechanical devices like microreactors which are usually working with non-Newtonian fluids. The cross section of these devices are most often close to rectangular shape.Therefor, in this study,Hydrodynamic charactristics and mass transport of non-Newtonian fluids under... 

    An Investigation to the Effect of Heterogeneity of Surface’s Potential on Mass Transport and Surface Reaction Kinetics in Microreactors

    , M.Sc. Thesis Sharif University of Technology Abodllahzadeh, Mojtaba (Author) ; Saeedi, Mohammad Saeed (Supervisor)
    Abstract
    Nowadays, technology has facilitate the miniaturization of laboratory systems, medical and drug delivery tools. As a result, researchers are interested to miniaturize these tools. The extensive research in this field led to invention of lab-on-a-chips, which with the size of a few µm to a few mm, can do multiple tasks in human body. One of most important components of these devices, is microreactor. A wide range of measurements and reactions in microreactors, need to bind with the receptors at the surface of the cylindrical microchannels. For this purpose, this study, investigates the effects of surface heterogeneity on microreactors performance. In this Thesis, the governing equations were... 

    Evaluation of Hollowfiber Membranes Uesd In Hemodialysis

    , M.Sc. Thesis Sharif University of Technology Hamed, Hamid (Author) ; Abdekhodaei, Mohammad Jafar (Supervisor)
    Abstract
    Due to largre number of patients treated by dialysis and its significant increasing progress, dialysis efficiency and patients' life quality are of great interest.Dialyzer, the dialysis beating heart, has the role of cleaning blood by removing toxic solutes and balancing volume of bood's water through hollow fiber membranes. In this thesis, firstly we tried to focus on performance characteristics of dialyzer by studying effective parameters influencing dialyzer efficiency and ultimately we set two important performance characteristics, ultrafiltration coefficient and solute clearance, as our goal parameters for evaluating dialyzer's yield. To this purpose, we designed an experimental set...