Sharif Digital Repository

We study stationary entanglement properties of an optomechanical system containing an atomic ensemble. We focus onto the case of the movable mirror strongly coupled to the cavity field through both radiation pressure and photothermal force. Exploiting a quantum Langevin equation approach we investigate the bipartite entanglement properties of various bipartite subsystems as well as stationary tripartite entanglement of the system. We particularly study robustness of the atom-mirror entanglement against temperature. We show that, even though the photothermal force is a dissipative force, it can significantly improve the cavity mediated atom-mirror entanglement  

In the present study, the roll bonding behaviour of Al-3003/Al-4043 and Al-3003/Zn sheets were compared. The bi-layer sheets were produced by a roll bonding process at different reductions in thickness and rolling temperatures. The joint strengths of the sheets were evaluated by peel and bend testing before and after supplemental annealing treatment. The peeled surfaces were examined using a scanning electron microscope. The results indicated that the Al-3003/Al-4043 sheets were bonded with higher joint strength and lower threshold reductions in thickness with respect to the Al-3003/Zn sheets. In contrast to the Al-3003/Zn sheets, significant improvement was observed in the joint strength of... 

The ability to determine the bearing life time is one of the main purposes in maintenance of rotating machineries. Because of reliability, cost and productivity, the bearing life time prognostic is important. In this paper, a stiffness-based prognostic model for bearing systems is discussed. According to presumed model of bearing and fundamental of damage mechanics, damage curve approach is used to relate stiffness of vibratory system and bearing running life. Furthermore, using the relation between acceleration amplitude at natural frequency and stiffness, final relation between acceleration amplitude at natural frequency and running life time according to damage curve approach can be... 

Polyolefin blends have attracted great attention for years because of their improved physical and mechanical properties; especially when micro/nanofillers are present in the compound. Previous investigations have proven that incorporation of small amounts of nanoclay can enhance physical and mechanical properties of the polymer. This research has focused on the role of clay distribution on morphology and mechanical properties of ternary nanocomposites containing a rubbery phase. High-density polyethylene/ethylene vinyl acetate/clay (HDPE/EVA/clay) is opted as a typical model for this purpose. EVA is selected to act as both compatibilizer, because of having polar vinyl groups, and... 

A novel constitutive equation has been proposed to predict the effect of aging treatment on mechanical properties of AA6082 aluminum alloy. Considering that aging phenomenon affects the distribution of alloying element in matrix, and the fact that different distribution of alloying elements has different impediments to dislocation movement, a material model based on microstructure, has been developed in this research. A relative volume fraction or mean radius of precipitations is introduced into the flow stress by using the appropriate relationships. The GA-based optimization technique is used to evaluate the material constants within the equations from the uni-axial tensile test data of... 

A method is presented to synthesize 5 degrees of freedom (DoFs) of 3 translational and 2 rotational (3T2R) parallel kinematic structures. This method is based on the theory of linear transformation and geometrical analysis. Central to this method is a set of novel 5 DoFs 3T2R parallel mechanisms (PMs). Based on the legs configuration, the generated mechanisms are classified. Moreover, the promising mechanisms of each class are introduced with respect to some criteria, i.e.: (a) degree of coupling between the actuators and degrees of freedom; (b) easy kinematics and control command; (c) easy construction (or low cost construction); and, (d) manufacturability. With reference to these criteria,... 

In this research, ball milling of magnesium fillings with NaCl, KCl and urea was investigated as a simple way to produce Mg nanoparticles. Effects of feed geometry and milling time on crush mechanism and product size were determined. Optical, scanning and transmission electron microscopes were used to study the morphology of the products. Spherical charge particles were milled under argon atmosphere with 10 wt% cuboidal NaCl at 250 rpm for 50 h. With ball to powder ratio of 10:1, the average diameter of the product was 17 nm. Addition of NaCl changed the breakage mechanism from ductile–ductile to ductile–brittle, reduced particle size, stopped agglomeration and prevented the undesirable... 

The widely accepted approach to the foundation of quantum mechanics is that the Poisson bracket, governing the non-commutative algebra of operators, is taken as a postulate with no underlying physics. In this manuscript, it is shown that this postulation is in fact unnecessary and may be replaced by a few deeper concepts, which ultimately lead to the derivation of Poisson bracket. One would only need to use Fourier transform pairs and Kramers- Kronig identities in the complex domain. We present a definition of Hermitian time-operator and discuss some of its basic properties. © Electronic Journal of Theoretical Physics  

Loss of lower extremities has been one of the main problems in human life. Although most of the available knee devices are aesthetically acceptable, there is a necessity for lighter and more compact mechanisms, especially for younger amputees. This problem can be solved by the combining compliant mechanism design with traditional mechanism design methods. In this study, one group of the prosthetics that is known as the compliant knee mechanisms" is evaluated. At first, the different knee mechanisms, such as fourand six-bar knee linkages are investigated to calculate the values of the control moments (actuator torque). Then, the suitable location (where the actuator torque is to be exerted)... 

In this research, production of ferrite - martensite dual phase Steels with different martensite morphology was considered during transient liquid phase bonding of a low carbon steel. The steel was bonded using an iron base interlayer with melting point of 1443 K and 40 μm thickness. Bonding process carried out at 1473 K, under pressure of 0.5 MPa, at different holding time of 10, 20, 30 and 40 minutes. Microstructural studies of joint region showed that isothermal solidification completed at the bonding time of 40 minutes. Microstructure of joints made at the bonding time of 10, 20, and 30 minutes consists of two distinct region, athermal and isothermal solidified zones. Microstructure of... 

A novel voltammetric biosensor based on nano-TiO2/nafion/carbon nanoparticles modified glassy carbon electrode (TiO2/N/CNP/GCE) was developed for the determination of dobutamine (DBA). Characterization of the surface morphology and property of TiO2/N/CNP layer was carried out by the scanning electron microscopy and atomic force microscopy. The electrochemical performance of the modified electrode was investigated by means of the cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy techniques. Effective experimental variables, such as the scan rate, pH of the supporting electrolyte, drop size of the casted modifier suspension and accumulation... 

Stent implantation has been regarded as a major strategy to solve gastrointestinal diseases such as biliary obstruction during the last decade. The application of nitinol superelastic stents has been recently considered for minimising such problems as restenosis after stent implantation, the ability to low stent twist, unsuitable dynamic behaviour and inadequate strength radial of stent. In the present article, the effects of material properties on mechanical performance of Z shaped nitinol wire stent under crushing test for clinical applications are studied by finite element modelling. Nitinol stent shows better mechanical and clinical performance after applying 90% crushing, less chronic... 

Quantum Mechanics is a good example of a successful theory. Most of atomic phenomena are described well by quantum mechanics and cases such as Lamb Shift that are not described by quantum mechanics, are described by quantum electrodynamics. Of course, at the nuclear level, because of some complications, it is not clear that we can claim the same confidence. One way of taking these complications and corrections into account seems to be a modification of the standard quantum theory. In this paper and its follow ups we consider a straightforward way of extending quantum theory. Our method is based on a Bohmian approach. We show that this approach has the essential ability for extending quantum... 

In this article, we investigate Bohm's view of quantum theory, especially Bohm's quantum potential, from a new perspective. We develop a quasi-Newtonian approach to Bohmian mechanics. We show that to arrive at Bohmian formulation of quantum mechanics, there is no necessity to start from the Schrödinger equation. We also obtain an equation that restricts the possible forms of quantum potential and determines the functional form of it without appealing to the wave function and the Schrödinger equation. Finally, we discuss about the significance of quantum potential in the conceptual structure of quantum theory  

Mach’s principle asserts that the inertial mass of a body is related to the distribution of other distant bodies. This means that in the absence of other bodies, a single body has no mass. In this case, talking about motion is not possible, because the detection of motion is possible only relative to other bodies. But in physics we are faced with situations that are not fully Machian. As in the case of general theory of relativity where geodesics exist in the absence of any matter, the motion has meaning. Another example which is the main topic of our discussion, refers to Bohmian quantum mechanics, where the inertial mass of a single particle does not vanish, but is modified. We can call... 

In this research, ball milling of magnesium fillings with NaCl, KCl and urea was investigated as a simple way to produce Mg nanoparticles. Effects of feed geometry and milling time on crush mechanism and product size were determined. Optical, scanning and transmission electron microscopes were used to study the morphology of the products. Spherical charge particles were milled under argon atmosphere with 10 wt% cuboidal NaCl at 250 rpm for 50 h. With ball to powder ratio of 10:1, the average diameter of the product was 17 nm. Addition of NaCl changed the breakage mechanism from ductile–ductile to ductile–brittle, reduced particle size, stopped agglomeration and prevented the undesirable... 

Cement kiln dust (CKD) is one of the most important waste materials in the cement industry. The large amount of this material, has encouraged researchers to propose new ways to recycle and reuse it. In this paper, effects of adding cement kiln dust to the ordinary Portland cement, on the physical and mechanical properties of ordinary and lightweight concrete were investigated. Results showed that concrete containing CKD, presents lower workability and modulus of elasticity; however, improvements in strength was observed by adding particular amounts of CKD. Eventually, it was found that adding 10% of cement weight CKD is the appropriate percentage for utilizing in manufacturing ordinary and... 

Protrusion friction spot stir welding (PFSSW) was introduced as a novel method to produce keyhole-free welds of a drawing quality special killed low carbon steel (DQSK). The effects of welding parameters such as tool rotation speed and plunging depth were investigated on the mechanical properties and metallurgical aspects. The sheet/sheet joint interface of the welds produced by PFSSW was visible and non-planar compared to the conventional FSSW method. Microstructure and hardness were affected by dynamic recrystallization and transformation hardening in the stir zone. Hardness value of the stir zone produced by the present work was much lower than that produced by resistance spot welding... 

Background: The researches regarding the influence of microthread design variables on the stress distribution in bone and a biomechanically optimal design for implant neck are limited. The aim of the present study is to compare the effect of different microthread designs on crestal bone stress. Materials and Methods: Six implant models were constructed for three-dimensional finite element analysis including two thread profile (coarse and fine) with three different lengths of microthreaded neck (1 mm, 2 mm, and 3 mm). A load of 200 N was applied in two angulations (0° and 30°) relative to the long axis of the implant and the resultant maximum von Mises equivalent (EQV), compressive, tensile,... 

The cold drawing process is one of the precise metal forming techniques which have attracted attention by many researchers with respect to the given properties such as potential for improvement of mechanical properties of the material, achieving of accurate dimensional tolerances and rise of quality at final surface so that different studies are conducted on properties of various materials in the course of analysis of its effect. Using cold drawing and also exertion of special heat treatment cycle in this investigation, initially the seamless steel tube Ck60 has been produced and then effect of cold drawing has been assessed on the mechanical properties and structure of steel. The production...