Sharif Digital Repository

This article demonstrates the properties of open-cell flexible polyurethane foams incorporating multi-walled carbon nanotubes. Three different types of highly functionalized nanotubes having carboxyl, hydroxyl and amide functional groups were synthesized. Neat polyurethane foam and three nanocomposite foams filled with 0.1 wt% of treated nanotubes were prepared. It was found that thermal stability, mechanical properties and acoustic damping were improved significantly by incorporation of small amounts of nanotubes. The nanotubes modified with carboxyl groups were found to have much more influence compared to the other two functional groups, possibly due to better interfacial interaction and... 

Silica aerogel-multi wall carbon nanotube composites were synthesized successfully with a waterglass precursor and an ambient pressure drying method. Pure silica aerogels are so fragile that they cannot be used easily. Carbon nanotubes (MWCNT) were used as reinforcements to strengthen the mechanical properties of pure silica aerogels. Results show that inserting small amounts of MWCNT causes silica aerogels to monolith. By addition of MWCNT, monolith nanocomposites were produced with 800 m2/g surface area and a 140° contact angle. Results show that the silica aerogels and reinforced composites have an excellent adsorption property for the removal of organic pollutants from water. The average... 

Multi-Walled Carbon nanotube (MWCNTs) films were obtained by Thermal Chemical Vapor Deposition method and coated by palladium sputtering process. Raman spectroscopy was used to study alteration in quality of the carbon nanotubes after the sputtering process. Fourier Transform Infra Red (FTIR) spectroscopy showed that hydrogenation process can reduce the C{double bond, long}O to C-O and also produce O-H bond. Furthermore, the electrical resistance measurement for Pd/MWNTs films was performed in a chamber with 1% hydrogen gas in a constant dry air flow. Hydrogen sensing behavior of the films was investigated at 50 °C. Pd/MWCNTs films presented an irreversible gas response to hydrogen in the... 

A micro-SPE technique was developed by fabricating a rather small package including a polypropylene membrane shield containing the appropriate sorbent. The package was used for the extraction of some triazine herbicides from aqueous samples. Solvent desorption was subsequently performed in a microvial and an aliquot of extractant was injected into GC-MS. Various sorbents including aniline-ortho-phenylene diamine copolymer, newly synthesized, polypyrrole, multiwall carbon nanotube, C18 and charcoal were examined as extracting media. Among them, conductive polymers exhibited better performance. Influential parameters including extraction and desorption time, desorption solvent and the ionic... 

The effects of various ratios of Fe/Ni/MgO and growth temperatures on yield, diameter and quality of multi-walled carbon nanotubes (MWCNTs) were studied. Thermal gravimetric analysis (TGA) confirmed that the MWCNT yield depends on Fe/Ni ratio with the following order; Fe0.5 Ni0.5 > Fe > Fe0.75 Ni0.25 > Fe0.25 Ni0.75 > Ni. The results indicated that there is an optimum temperature (940 °C) for the MWCNT growth both from quality and quantity (yield) aspects as compared to other temperatures. Moreover, the changes on Fe/Ni to MgO ratio for the MWCNT growth revealed that Fe/Ni/MgO with the ratio of 17.5/17.5/65 had the highest quality and surface area as compared to the other ratios. The... 

This study deals with an experimental investigation on the thermal performance of a mechanical wet cooling tower with counter flow arrangement by using multi-walled carbon nanotubes (MWNTs) and nanoporous graphene nanofluids. Stable nanofluids were prepared through two-step procedure by using water with properties taken from a working cooling tower in the South of Iran. Zeta potential revealed suitable stability of MWNTs and nanoporous graphene nanofluids. Thermal and rheological properties of the nanofluids were investigated. It was found that thermal conductivity increases by 20% and 16% at 45°C for MWNTs and nanoporous graphene nanofluids, respectively. The increase in density and... 

In this research, multi-walled carbon nanotubes (MWCNTs) were modified by dendritic macromonomer. Herein, polyamidoamine with acrylamide end groups was incorporated on MWCNTs. Afterwards, poly(N-isopropylacrylamide), (PNIPAM), was grafted on polyamidoamine in a facile synthesis. Then, doxorubicin as anticancer drug was loaded on this nanocarrier. The drug release was studied at below and above the lower critical solution temperature of PNIPAM, (LCST 32 °C), 27 °C and 37 °C, respectively. At 37 °C (body temperature) the polymer shell dehydrated and the drug release increased. The profile of drug release was expressed by Higuchi's equation which indicated that the drug release mechanism was... 

A dispersive micro-solid-phase extraction (D-μ-SPE) procedure coupled with surfactant-enhanced spectrofluorimetric detection was developed for determination of ofloxacin and lomefloxacin from biological and environmental samples. The D-μ-SPE procedure was performed using magnetic Fe3O4 nanoparticle grafted multi-walled carbon nanotube as an efficient adsorbent. The main factors affecting the signal enhancement (including surfactant concentration and pH) and extraction efficiency (including pH, extraction time, sample volume, amount of magnetic adsorbent, and desorption conditions) were investigated in detail. Under the optimized conditions, the calibration curves were linear (R2 0.9995) over... 

In this paper, using the continuum approximation together with Lennard-Jones potential, a new semi-analytical expression is given to evaluate the van der Waals interaction between two single-walled carbon nanotubes. Based on this expression, two new formulations are also proposed to model multi-walled carbon nanotubes. In the first one, the interactions between each pair of shells from the inner and outer tubes are summed up over all of the pairs, whereas in the second formulation, a set of correction factors are applied to convert the results of double-walled carbon nanotubes to the correlated multi-walled ones. With respect to the present formulations, extensive studies on the variations... 

Polycaprolactone-polylactide block copolymers (PCL-block-PLA) were grafted onto filled multi-wall carbon nanotubes (MWCNT) successfully. In this synthesis, MWCNTs were opened and functionalized, and then they were filled by silver nanoparticles. The filled MWCNT were used as macroinitiator for ring opening polymerization of ε-caprolactone and L-lactide. Then the end hydroxyl functional groups of MWCNT-graft-PCL or MWCNT-graft-PLA were used as initiator for ring opening polymerization of lactide and ε-caprolactone and MWCNT-graft-PCL-block-PLA or MWCNT-graft-PLA-block-PCL were obtained, respectively. Length of grafted copolymer chains onto the MWCNT was controlled using CNT/monomer ratio.... 

In this work, the synthesis and characterization of a new nanocomposite from carbon nanotubes-graft-polymer (CNTs-g-P) is reported. The products were obtained by the filling of multi-walled carbon nanotubes (MWCNTs) (inner diameter 2040 nm) with CoFe2O4 magnetic nanoparticles, been grafted with poly (caprolactone). The filling process was carried out by using acid treatment through wet chemistry. The structure and the properties of the new nanocomposite were studied with TEM, VSM, TGA, and spectroscopic techniques. © 2009 World Scientific Publishing Company  

Abstract: The electrodeposition of platinum nanoparticles (PtNPs) on multiwall carbon nanotubes (MWCNTs)/fluorine-doped tin oxide glass (FTO) was investigated. Nucleation and growth mechanisms were studied via Scharifker and Hills model. Chronoamperometry results clearly show that the electrodeposition processes are diffusion-controlled and the diffusion coefficient is 1.5×10-5cm2/s. The semi-spherical particles with lamellar morphology were observed in 1M H 2SO 4, while a petal shape was discerned in 0.5M H 2SO 4. Also, dispersion, size, and uniformity of PtNPs were investigated, where the finer distribution of PtNPs with the average size less than 100 nm was obtained in 0.5M H 2SO 4... 

The present paper describes a voltammetric sensor based on glassy carbon electrode (GCE) modified with a thin film of multi-walled carbon nanotubes (MWCNTs) coated with an electro-polymerized layer of titan yellow-doped over–oxidized polypyrrole (OPPY) for the determination of tizanidine (TIZ). A significant enhancement was observed in the anodic peak current of TIZ on the surface of OPPY/CNT/GCE, relative to the bare, CNT- and OPPY-coated GCEs. The microscopic structure and surface morphology of the composite film was thoroughly characterized by means of atomic force microscopy (AFM), scanning electron microscopy (SEM) and cyclic voltammetry (CV) techniques. The effect of various...