Sharif Digital Repository

The improved properties of nanocomposites are not achievable with conventional composites. Scale effect is one the most important parameters in the physical and mechanical properties of polymeric nanocomposites. One of the physical phenomena, which can be related to the scale effect, is the very large interface between the nanoparticles and the polymeric matrices. Motional behavior and conformation of polymeric chains change near the nanoparticles surfaces. Due to high interface of the nanoparticles with the polymeric matrices the amount of these types of changes in the polymeric chains are so large that can change the physical and mechanical properties of polymeric nanocomposites. In this... 

Nanostructured materials are a new kind of engineering materials which attracted researchers’ interest because of their interesting mechanical /physical properties, as well as controllable microstructural design ability for desired applications. These new materials are homogeneous at the macroscale but at the microstructural level, may have heterogeneities including common nanostructures. Because of multiscale nature of these materials, new multiscale methods should be developed and used for better understanding the behavior of them. Multiscale methods could be categorized into concurrent and hierarchical methods. In concurrent methods, the domain under study is explicitly divided into... 

A decade after discovery of graphene, the unique properties and characteristics of two-dimensional materials, particularly an emerging family of carbides and nitrides (MXenes), have attracted the attention of researchers. MXenes are two-dimensional structures of two or more layers of transition metals, with interstitial carbon and/or nitrogen atoms, with exceptional properties such as high specific surface area, excellent elastic modulus, metallic conductivity, and various termination groups. These properties can be altered by various factors, including chemical composition and synthesis processes, and any changes in these factors significantly affect the properties of MXene sheets. In this... 

This research investigated the corrosion and antibacterial properties of PTFE+TiO2/Ag coating and its adhesion to 316L stainless steel. To increase adhesion, polydopamine coating was created as an intermediate layer by chemical deposition method on stainless steel, then PTFE + TiO2 coating was created on the sample by immersion method, and then silver nanoparticles were applied as the third layer by chemical deposition method. According to the polarization curves, the most corrosion-resistant coatings with corrosion current density of 3.34×10-5 and 3.25×10-4 μA are coatings PTFE+TiO2 and PTFE/PTFE+TiO2/Ag respectively. In terms of antibacterial activity, according to the non-growth halo... 

In this research, the strength and wear resistance of aluminum 5083 was improved by using composites with magnesium oxide nanoparticles (MgO-20nm) and friction stir processing. The effect of the number of process passes and rotational speed variables, considering the number of one, three, and five passes at rotational speeds of 700, 1000, 1300, 1600, and 1900 rpm, was investigated on the mechanical properties and wear behavior of the composite. To determine the appropriate weight percentage of MgO powder, the longitudinal tensile strength of three composites with different weight percentages of 3, 4.7, and 6 were compared. The linear movement speed of the tool was selected as a constant... 

In this research, aluminum titanate or tialite with the chemical composition of Al2TiO5 was synthesized as nanostructured form using the sol-gel method with the aim to serve as a chemical source for aluminum and titanium elements within the fabrication of in-situ Al2O3-Al3Ti-reinforced aluminum matrix nanocomposites. Since the aforementioned nanocomposite is produced based on the thermal decomposition of tialite, the thermar decomposition of this material in air atmosphere, under applied mechanical strain, and direct contact with the underlying aluminum was comprehensively evaluated. The empirical results showed that as tialite is exposed to aluminium, the reaction starts from low... 

Creating sustainable development in today's human societies is essential, one of the pillars of achieving this important goal is environmental protection. Thus, waste management as a new challenge is leading engineers. Lead-acid battery waste is one of the sources of environmental pollution. Lead-acid battery separators contain 50% recyclable nanosilica. The main challenge of recycling nanosilica from separators is the presence of significant amounts of 6 to 9% wt.% of lead and 5% by weight of other impurities. Therefore, in the present study, lead trapped in the separating pores is removed using mechanical washing or abrasive washing. Then, the quality of recycled nanosilica is evaluated... 

Hydroxyapatite-Graphene Nanocomposite coatings were formed on Ti-6Al-4V alloy by Plasma electrolytic oxidation. PEO electrolyte contains calcium acetate and calcium glycerophosphate. The effect of adding graphene to PEO electrolyte on the corrosion, mechanical, and biocompatibility properties of the coating investigated. Before adding graphene to the electrolyte, working parameters such as voltage, current density, process time were optimized using scanning electron microscopy (SEM), potentiodynamic polarization test, and thickness measurement. Examination of the coating morphology showed that due to thermal stresses, surface cracks formed at Voltages above 350 V. The results of the... 

The N-doped rGO/NiFe2O4@Ti-doped ZnO as a novel ternary nanocomposite with magnetic recyclable was obtained by a facile and low-cost hydrothermal method. The structure, morphology, and optical as well as magnetic properties of synthesized nanocomposite were analyzed using the X-ray diffraction (XRD), Fourier-transform infrared spectra (FTIR), Raman spectroscopy, Emission scanning electron microscopy (FESEM) with Energy dispersive spectra, Transmission electron microscopy (TEM), UV-vis diffusive reflectance spectra, and Vibrating sample magnetometer (VSM). The photocatalytic activity was determined by the degradation of Methylene blue (MB) and Methylene orange (MO) dyes under visible light... 

In the past few years, many research works on the controllable integration of metal nanoparticles and metal-organic frameworks were done, since the obtained composite material shows a synergism effect in catalysis and photocatalysis, drug delivery applications, gas, and energy storage, as well as sensing. For the first time, in this study, we employed template-assisted growth to synthesize Au-HKUST-1 Nanocomposite. XRD analysis entirely confirms that employing this strategy in synthesizing Au-HKUST-1 was wholly successful, and the plasmonic properties of this nanostructure were studied via UV-visible spectroscopy. In the course of synthesis, gold nanoparticles with 70nm diameter were... 

In this research, synthesis and characterization of photocatalytic properties of g-C3N4 / TiO2 nanocomposite was carried out. The target of research was to increase the photocatalytic properties of g-C3N4. So at first, g-C3N4 was synthesized from melamine precursor via thermal pyrolysis. Then, TiO2 nanoparticles were synthesized via sol – gel method. g-C3N4 / TiO2 nanocomposite with heterojunction structure was synthesized in one step by thermal pyrolysis of certain amounts of melamine precursor and TiO2 nanoparticles mixture in 550 ℃. Characterization of synthesized samples was carried out by XRD, FT-IR, UV-Vis, PL, BET, DLS and FE-SEM tests. Characterization results showed that g-C3N4,... 

In the preceding years, hydroxyapatite (HA)-based coatings and scaffolds have been known as the best biomaterials for dental and orthopedics applications. Biocompatible and bioactive hydroxyapatite-based Coatings on metallic implants is one of the best methods for reaching both suitable mechanical properties and appropriate bioactivity, leading to better osseointegration and osteoblast proliferation. The ultimate goal of this project is characterization as well as mechanical and electrochemical behavior investigation of Hydroxyapatite- Chitosan nanocomposite coating by electrophoretic deposition (EPD) method on Plasma Electrolyte Oxidation (PEO) treated titanium substrates and Magnesium (Mg)... 

In this study, in situ Al-Al3Ti-Al2O3 nanocomposite has been fabricated on thermal decomposition of tialite (Al2TiO5 or AT) precursor in the aluminum matrix through powder metallurgy method. The high-temperature mechanical property of Al-Al3Ti-Al2O3 on this procedure has been investigated. In the first step nano-structured tialite were synthesized through citrate sol-gel methods. Then 3.5 wt.% tialite powder was mixed with aluminum by high energy vibratory milling for 3 hours. In the next step, green compacts of mechanically milled powder mixtures were sintered at 530°С for 6 hours under argon atmosphere. In the final step, hot extrusion as a consolidation method reduces the sample voids,... 

Transition metal oxides and carbon based materials (especially graphene) are common electrode materials in supercapacitors. The metal oxide limitation is due to their high agglomeration and low electrical conductivity. On the other hand graphene base materials due to their unique structure as well as high electrical conductivity and high surface area increase energy storage capability. However, chemically produced graphene generally suffers from high agglomeration and re-stacking after removal from the solution and drying, g, which results in reduced electrochemical performance of graphene sheets in supercapacitors. To take full advantage of these two groups of materials, it is expected that... 

This research aimed at production of Cu-rGO via the combination of Molecular-Level-Mixing (MLM) method and powder metallurgy route (PM). First, Cu-GO composite powder was produced via MLM method. Subsequently, the resultant powder was mixed with electrolytic copper powder.Synthesis process included adjustment of the solution containing copper sulfate and 2Na.EDTA using NaOH solution. In the next step, GO suspension was added to the aforementioned solution. Finally, reduction of copper powder and formation of nanocomposite powder completed via the addition of Sodium Borohydrate. Nanocomposite powder was washed and dried in vacuum oven in 70˚C. GO reduction process took place using a tube... 

The g-C3N4/Fe2O3 nanocomposite was produced by the combustion synthesis. The product was characterized by x-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller study (BET), Ultraviolet-visible analysis (UV-vis) and photoluminescence measurement (PL). Effect of iron nitrate on stability and photocurrent density under simulated visible-light irradiation was determined. The highest photocurrent density obtained (4.25 μA/Cm2) was twelve times the pure g-C3N4. This improvement was due to a bandgap decrease, the specific surface area increase, reduction of the electron-hole recombination, and... 

Nowadays, the development of different polymer blend nanocomposites is of great importance for achieving electrical and antistatic properties for various applications such as auto parts and the packaging industry. Immiscible polymer blends with conductive nanoparticles such as carbon nanotube, graphene, etc. can reach the conductivity threshold with low amounts of nanoparticles and produce desired electrical properties. In the present study, we have attempted to develop a polystyrene(PS)/ethylene-octene copolymer(EOC)/carbon nanotube(CNT) blend nanocomposite with suitable electrical conductivity. The compounding was performed by melt mixing at two weight percent of 80/20 and 50/50 (PS/EOC)... 

Polyamide-6 is a thermoplastic polymer that is classified as electrically non-conductive materials. One way of adding conductivity to the polymer matrices is by utilizing them in a nanocomposite form. Superior mechanical and electrical properties of Carbon Nanotubes make them worthy of being chosen as reinforcement in nanocomposites to extend their operation to a broader range of applications, like conductive nanocomposites, mainly polymer-based matrices. The Nanotubes have chemical affinity and tend to entangle and aggregate. Because of this, to achieve a uniform and remarkable electrical conductivity is hard-to-reach. state of entanglement effects correctly melt methods of polymer blend... 

In this project, all-cellulose nanocomposites for smart packaging of meat products were synthesized via film casing method. These nanocomposites were aimed to provide visual response to pH change, which occurs due to decay of the meat products. The prepared nanocomposites would be placed inside the packages to be in direct contact with the products and could improve shelf life the products with the help of antibacterial natural extracts incorporated in the samples.Synthesis of the samples started with cellulose nano whiskers synthesis via acid hydrolysis. The prepared nanoparticles were then characterized with XRD, DLS, and Zeta potential analysis. It was shown that a big portion of the... 

In the present work, at first Al-20 wt% Ti nanocomposite was fabricated via mechanical alloying in high energy vibratiory mill for 1-4 hours. Particles morphology, crystallite size changes and phases transformation were investigated during mechanical alloying. Next, the powders which mechanically alloyed for 2 and 4 hours was compressed by hot extrusion at 500 ℃. The extruded specimens were investigated by different tests such as density, hardness, tensile and differential scanning calorimetry (DSC). Microscopic analysis and phases transformation were also investigated by optical microscopy (OM), field emission electron microscope (FESEM) and X-ray diffraction. Then, the samples were heat...