Sharif Digital Repository

In this paper, an axial dispersion mathematical model is developed to simulate a three-phase slurry bubble column reactor for direct synthesis of dimethyl ether (DME) from syngas. This large-scale reactor is modeled using mass and energy balances, catalyst sedimentation and single-bubble as well as two-bubbles class flow hydrodynamics. A comparison between the two hydrodynamic models through pilot plant experimental data from the literature shows that heterogeneous two-bubbles flow model is in better agreement with the experimental data than homogeneous single-bubble gas flow model. Also, by investigating the heterogeneous gas flow and axial dispersion model for small bubbles as well as the... 

This work presents the optimization of a solar collector surface in solar desiccant wheel cycle which for cooling process with typical configuration naming desiccant wheel, heat exchanger and water spray evaporative cooler. In this cooling cycle the thermal solar energy has used to heat the regeneration air of desiccant wheel cycle. The optimum solar collector surface has determined by taking into account of design parameters such as velocity of air, wheel speed, thickness of the desiccant and hydraulic diameter of the desiccant wheel and also operating conditions such as outside temperature, outside relative humidity, regeneration air temperature and total solar irradiance. For this... 

The properties of metallic nanorods vary due to changes in their composition, size and shape, which all depend on the aspect ratio of the nanorods. This work focuses on the optimization of the aspect ratio of silver nanorods using response surface methodology (RSM). Seed-mediated approach, which is the newest method with less difficulty, has been used for the synthesis of silver nanorods. First, silver ions were reduced with sodium borohydride in the presence of sodium citrate dehydrate, as stabilizer. Then, the prepared seeds were added to a solution containing more metal salts, a weak reducing agent (ascorbic acid) and a rod-like micellar template (cetyltrimethylammonium bromide, CTAB).... 

The newly developed multiphase transformation-induced plasticity (TRIP) steels are of interest for industrial applications because of their excellent combination of high strength and ductility. Their performance can be successfully controlled by designing an optimum balance in the volume fractions of ferrite, bainite and retained austenite. The characteristics of the retained austenite are considered to be the main key to achieving the desired final properties. Against this background, the effects of retained austenite characteristics, such as volume fraction, carbon concentration, size and shape, on the behaviour of TRIP steels have been studied. The crystallographic orientation of the... 

A promising electrochemical sensor was developed based on a layer by layer process by electro-polymerization of pyrrole in the presence of new coccine (NC) as dopant anion on the surface of the multi-walled carbon nanotubes (MWCNTs) pre-coated glassy carbon electrode (GCE). The modified electrode was used as a new and sensitive electrochemical sensor for voltammetric determination of sumatriptan (SUM). The electrochemical behavior of SUM was investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results showed a remarkable increase (∼12 times) in the anodic peak current of SUM in comparison to the bare GCE. The effect of experimental variables such... 

Ce-doped ZnO nanocomposite thin films with Ce/Zn ratio fixed at optimum value (10 at.%) have been prepared via sol-gel method at different annealing temperatures varied from 180 to 500 °C. The synthesized samples were characterized employing atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) techniques. According to AFM analysis, the average grain size increased from about 70 nm to 150 nm by increasing the annealing temperature from 300 to 500 °C. Moreover, based on the XPS data analysis, it was found that three major metal ions namely Ce 3+, Ce4+, and Zn2+ coexist on the surface of the nanocomposite films. XPS data analysis also revealed that... 

In this paper, the effects of both pozzolans and (steel and poly-propylene) fibers on the mechanical properties of roller compacted concrete are studied. Specimens for the experiments were made using a soil-based approach; thus, the Kango's vibration hammer was used for compaction. The tests in the first stage were carried out to determine the optimal moisture requirements for mix designs using cubic 150 × 150 × 150 mm specimens. In the tests of the second stage, the mechanical behaviors of the main specimens made using the optimal moisture obtained in the previous stage were evaluated using 28, 90, and 210 day cubic specimens. The mechanical properties of RCC pavements were evaluated using... 

This article presents experimental results on the electrophoretic deposition (EPD) of bioresorbable chitosan/45S5 Bioglass® composite coatings for orthopaedic implants based on the Taguchi design of experiments (DOE) approach. The influence of EPD parameters including Bioglass® concentration, electric voltage and deposition time on deposition yield was studied by an orthogonal Taguchi array of L18 type. Multivariate analysis of variance (MANOVA) and regression analysis based on the partial least-square method were used to identify the significant factors affecting the deposition yield and its stability during constant-voltage EPD. The coatings were characterised by high resolution scanning... 

In this paper, we consider a cellular cognitive radio network that adopts opportunistic spectrum access for its data transmission in the downlink from base stations (BSs) toward cognitive radio users (CRs). Since the spectrum is licensed to a primary network, base stations of the cellular secondary network should protect primary users against excessive interference caused by secondary network communications. As the optimum resource allocation problem is NP-hard, we use game theory to propose a distributed scheme for power allocation in the downlink of cognitive radio network to guarantee communications of primary networks and provide required signal-to-noise plus interference of cognitive... 

Titanium dioxide is a cheap, chemically stable and non-toxic material. However its photocatalytic properties are unstable and it is a modest semiconductor and a mediocre insulator. For several applications it would be interesting to make it either more insulating or more conducting. The goal of this work was to modify the photocatalytic properties of nano-crystalline TiO2 powders by wet chemical routes and hydrothermal methods to understand the mechanism leading to these modifications The principal factors that influence the photocatalytic properties are on the one hand the concentration and nature of the chemical and physical conditions in TiO2, and on the other hand the morphology of the... 

Polyurethane elastomer networks were designed and synthesized based on hydroxyl terminated polybutadiene/polypropyleneoxide (HTPB/PPO) mixtures, 2,4-toluene diisocyanate and 1,4-butanediol. Various networks with different molar ratio of HTPB to PPO (0/100, 25/75, 50/50, 75/25 and 100/0) had been prepared. Depending on the length of soft segment, average functionality of polyol mixtures, mechanical and thermal properties of samples were varied. Our observations confirmed that final properties of the networks can be attributed to two synergistic factors: (a) formation of chemical network (crosslinking) and (b) soft segment length. An optimum composition was found. This optimum composition... 

Carbon nanotubes were electrodeposited in acetonitrile solution at room temperature using Cu, and Fe-Ni nanoparticles as nucleation sites on HF-etched Si(100) wafer substrate. The electrochemical behavior of the deposition was investigated by voltammetry and chronoamperometry techniques. In order to obtain the optimum growth condition, the deposition critical parameters including current density range, potential and time were studied and calculated. Carbon nanotubes with approximate external diameter of 40-100 nm were fabricated under potentiostatic condition and diffusion control at - 20 V in 4-6 h. The film crystallinity was investigated by means of X-ray diffraction and the tubes... 

In the present study, a procedure was developed to determine the optimum reaction rate constants in generalized Arrhenius form and optimized through the Nelder-Mead method. For this purpose, a comprehensive mathematical model of a fixed bed reactor for dehydrogenation of heavy paraffins over Pt-Sn/Al 2O 3 catalyst was developed. Utilizing appropriate kinetic rate expressions for the main dehydrogenation reaction as well as side reactions and catalyst deactivation, a detailed model for the radial flow reactor was obtained. The reactor model composed of a set of partial differential equations (PDE), ordinary differential equations (ODE) as well as algebraic equations all of which were solved... 

Purpose - The purpose of this paper is to analyze a squared lattice cylindrical shell under compressive axial load and to optimize the geometric parameters to achieve the maximum buckling load. Also a comparison between buckling loads of a squared lattice cylinder and a solid hollow cylinder with equal weight, length and outer diameter is performed to reveal the superior performance of the squared lattice cylindrical shells. Design/methodology/ approach - A cylindrical lattice shell includes circumferential and longitudinal rods with geometric parameters such as crosssection areas of the rods, distances and angles between them. In this study, the governing differential equation for buckling... 

To stay competitive in the new dynamic market having large fluctuations in product demand, manufacturing companies must use systems that not only produce their goods with high productivity but also allow for rapid response to market changes. Reconfigurable manufacturing system (RMS) is a new paradigm that enables manufacturing systems to respond quickly and cost effectively to market demand. In other words, RMS is a system designed from the outset, for rapid changes in both hardware and software components, in order to quickly adjust its production capacity to fluctuations in market demand and adapt its functionality to new products. The effectiveness of an RMS depends on implementing its... 

Recently, ultrasonic wave technology has received much attention as a method for removal of asphaltene deposits from the near wellbore region. However, very little is known about another feature of this technology on the kinetics of asphaltene molecules aggregation. In this work, the kinetics of asphaltene flocculation in several crude oil samples exposed to ultrasonic waves for different time intervals is studied by confocal microscopy. The colloidal structural evolutions of flocks are described by analysis of size distribution of flocculated asphaltene particles. The results show that for the first 90 min of flocculation time, the size of aggregates increases rapidly, and a... 

The effect of thickness of TiO2 coating on synergistic photocatalytic activity of TiO2 (anatase)/α-Fe 2O3/glass thin films as photocatalysts for degradation of Escherichia coli bacteria in a low-concentration H2O2 solution and under visible light irradiation was investigated. Nanograined α-Fe2O3 films with optical band-gap of 2.06 eV were fabricated by post-annealing of thermal evaporated iron oxide thin films at 400 °C in air. Increase in thickness of the Fe2O3 thin film (here, up to 200 nm) resulted in a slight reduction of the optical band-gap energy and an increase in the photoinactivation of the bacteria. Sol-gel TiO2 coatings were deposited on the α-Fe2O 3 (200 nm)/glass films, and... 

The adsorption of chromium compounds from solutions by a composite of polyaniline/poly ethylene glycol (PANi/PEG) was investigated in this study. Experiments were conducted in batch mode under various operational conditions including agitation time, solution pH, PANi/PEG dose and initial concentration of chromium salts. Results showed that concentration of PEG at synthesizing stage has a significant effect on the capacity of produced composite for removal of chromium. Morphologically, PANi/PEG composite is closely dependent on the concentration of PEG. Maximum removal of hexavalent chromium was experienced when 2. g/L of PEG was used in synthesis of PANi/PEG. Removal of hexavalent chromium... 

A new method for simultaneous determination of dopamine (DA) and ascorbic acid (ASC) is proposed. The method is based on the reaction of dopamine and ascorbic acid with the oxidizing agent (silver nitrate) in the presence of PVP (as a stabilizer) and the formation of silver nanoparticles in a slightly basic medium. Spectrophotometry is used to monitor the changes of the surface plasmon resonance (SPR) band at a maximum wavelength of silver nanoparticles (440 nm) vs. time. Three-layered feed-forward artificial neural networks (ANN) trained by back propagation learning algorithm is used to model the relationship between absorbance and concentration to quantify analyte in mixtures under optimum... 

Enzymatic decolorization of the monoazo dye, acid orange 7 (AO7) by the fungal peroxidase from Coprinus cinereus NBRC 30628 is a complex system, which is greatly affected by temperature, pH, enzyme activity and the concentrations of H2O2 and dye concentration. The study of these factors and investigating the combined interactions between them by applying one-factor-at-a-time (OFAT) method and two other statistical methods including 2-factorial method and response surface methodology (RSM) were aimed in this work. Through OFAT analysis the optimized conditions were a temperature of 25 °C, pH 9.0 with H2O2 concentration of about 3.9 mM and AO7 concentration of 40 mg/l. A complete...