Sharif Digital Repository

Liquid-liquid equilibrium (LLE) data, density, viscosity, and interfacial tension for the ternary system of toluene-acetic acid-water were measured at 298.15 K and 101.7 kPa. The Othmer-Tobias and the Hand correlations were used to check the reliability of the experimental tie-lines. Moreover, the distribution coefficient and the separation factor were explored. It was found from the experimental results that a maximum separation factor value happens at an acetic acid mass fraction of 0.02 in the organic phase. Density, viscosity, and interfacial tension were correlated using the appropriate correlations such that the predicted results have excellent agreement with the experimental data. The... 

Humic acid (HA) constitutes a large portion of natural organic matter (NOM), and is the main precursor of toxic and cancerogenic Trihalomethanes compounds, formed during chlorination of drinking water. Therefore, it is essential that the humic acid be eliminated from water before treating it. The present study aims to investigate the photocatalytic degradation of humic acid (HA) using TiO2 nanoparticles immobilized on perlite granules (TIP), irradiated by UV light in a photoreactor. Samples of coated perlites were prepared by a dip coating method using a commercial powder of TiO2. Characteristics of the prepared samples were evaluated by X-ray and scanning electron microscope techniques.... 

The main challenge in many applications of acetic acid is acid dehydration and its recovery from wastewater streams. Therefore, the performance of polyamide thin film composite is evaluated to separate acetic acid from water. To reach this goal, the formation of polyamide layer on polysulfone support membrane was investigated via interfacial polymerization (IP) of meta-phenylenediamine (MPD) in water with trimesoyl chloride (TMC) in hexane. Also, the effect of synthesis conditions, such as concentration of monomers and curing temperature on separation of acetic acid from water were investigated by reverse osmosis process. Moreover, the separation mechanism was discussed. The solute... 

A switchable dual light- and temperature-responsive drug carrier using gold nanoparticles (Au NPs)-grafted poly(dimethylacrylamide-co-acrylamide)/poly acrylic acid [P(DMA-co-AAm)/PAAc] hydrogel was prepared by free radical polymerization procedure using N,N-methylenebisacrylamide as cross-linker and ammonium persulfate as initiator. Initial P(DMA-co-AAm) hydrogel and uniformly-distributed stable Au NPs, prepared by reduction of hydrogen tetrachloroaureate (III) hydrate in the presence of trisodium citrate, were synthesized separately. Then, the prepared P(DMA-co-AAm) and Au NPs were added to an acrylic acid solution along with the cross-linker and initiator to prepare PAAc hydrogel within... 

Levodopa [L-3, 4-dihydroxyphenylalanine, or L-DOPA] is an important neurotransmitter used for the treatment of neural disorders such as Parkinson's disease. Abnormal L-Dopa concentrations in biological fluids can be used for the evaluation of such diseases. In this work, a rapid and sensitive method for L-DOPA detection has been reported which is based on in situ formation of polylevodopa nanoparticles. Under alkaline conditions, L-DOPA is spontaneously oxidized to its quinone derivative and shows fluorescence properties. The fluorescence signal of the oxidation product has been monitored and used for the determination of L-DOPA in the presence of dopamine, uric acid, ascorbic acid and other... 

Hydrophobic titania nanoparticles were synthesized by a novel in situ sol-gel method and applied in a single drop liquid-liquid extraction column to enhance the overall dispersed-phase mass transfer coefficient (Kod). The chemical system of toluene, acetic acid and water was used, and the direction of solute (acetic acid) mass transfer was from dispersed phase, including: toluene and acetic acid to the continuous phase of water. For such system, much of the mass transfer resistance exists in the dispersed phase, which is nonpolar organic liquid. Hence, modified titania nanoparticles (MTNP's), prepared by sol-gel route, in five different concentrations of 0.001–0.005 wt.% were added in the... 

We present a novel hybrid electrode based on reduced graphene oxide/nickel/zinc oxide heterostructures. The sensor was fabricated by template-free hydrothermal growth of ZnO nanorod arrays on conductive glass substrates (FTO) followed by conformal electrodeposition of nickel nanoparticles with an average size of 18 nm. Then, in-situ reduction and electrophoretic deposition of graphene oxide (GO) nanosheets on the structured ZnO/Ni electrode was performed. The prepared three-dimensional nanostructure exhibited fast electrocatalytic response (<3 s) towards glucose oxidation due to the large surface area and high electro-activity. The prepared biosensor possessed a wide linear range over... 

In this paper, the effect of ozone on membrane fouling of membrane bioreactor (MBR) systems was investigated. Sludge specification such as soluble microbial product (SMP), extracellular polymeric substance (EPS), viscosity, particle size distribution (PSD), microscopic observations and sludge volume index (SVI) in presence of ozone were determined. Further, EPS, Fourier-transform infrared (FTIR) analysis, excitation-emission matrix (EEM) fluorescence spectroscopy, and gel permission chromatography (GPC) are considered to determine cake layer characteristics. The results indicated COD removal did not show significant difference with ozonation. Ozone also increases the particle size and... 

In the current investigation, four novel donoracceptor type organic dyes including (DPA-Ba, DPA-Hy, DPA-Rh, DPA-Cy), are proposed and their photophysical and electrochemical properties as well as dye-sensitized solar cell performance are systematically investigated. Among these dyes diphenylamine is utilized as an-electron donor while barbituric acid, hydantoin, rhodanine-n-acetic acid and cyano acetic acid, are proposed as anchoring groups as dye-sensitized solar cells (DSSCs). The synthesized dyes are characterized using FT-IR, NMR, mass spectrometry, absorbance and electrochemical measurements. The photophysical, electrochemical and photovoltaic properties of the solar cells based on... 

This study reports the importance of physicochemical characteristics of the core-shell structured polymer-coated Fe3O4 cluster@SiO2 nanocomposite particles for designing the biocatalysts used for transesterification of soybean oil. To demonstrate this issue, two different types of polymer molecules such as polyethylenimine (PEI) and polyacrylic acid (PAA) each with two different molecular weights are employed. The highest fatty acid methyl esters (FAMEs) synthesis yield values are achieved by the lipases immobilized onto the low- and high-molecular-weight PEI-coated particles as compared to those of the low- and high-molecular-weight PAA-coated particles (i.e., ∼64.8% and ∼73.1% versus... 

A carbon-paste electrode (CPE) modified with iron(II) phthalocyanine was used for the sensitive voltammetric determination of epinephrine (EN). The electrochemical response characteristics of the modified electrode toward EN, ascorbic acid (AA) and uric acid (UA) were investigated by cyclic and differential pulse voltammetry (CV and DPV). The results show an efficient catalytic activity of the electrode for the electro-oxidation of EN, which leads to improvement of reversibility of the electrode response and lowering its overpotential by more than 100 mV. The effect of pH and potential sweep rate on the mechanism of the electrode process was investigated. The modified electrode exhibits an... 

The purpose of this study was to produce an intelligent superabsorbent polymer (SAP) to be used as a pH sensitive matrix for the controlled delivery of drugs. Novel types of highly swelling SAPs were prepared by grafting crosslinked acrylic acid-co-acrylamide (AA-co-AAm) chains onto pectin by free-radical polymerization. The superabsorbent formation was confirmed by Fourier transform infrared spectroscopic (FT-IR) and scanning electron microscopy (SEM). The controlled release behavior of ibuprofen (IBU) from the superabsorbent polymer was investigated. SAP structural-property relationships that affect its controlled release behavior were determined. Analysis of the results indicated that it... 

The purpose of this study was to produce intelligent pectin-based superabsorbent polymers (SAP) to be used as pH- and thermosensitive carriers for the controlled delivery of non-steroidal anti-inflammatory drugs (NSAIDs). The superabsorbent formation was confirmed by Fourier transform infrared spectroscopic (FT-IR) and scanning electron microscopy (SEM). The effects of pH, ionic strength, temperature, porosity, particle size and levels of loaded drug on drug release profile in various surrounding media were investigated. Each sample was well characterized through swelling studies. The molecular weight between crosslinks (M̄C), crosslinking density (ve) polymer-solvent interaction parameter... 

An experimental investigation was conducted on the oxidative desulfurization of model sulfur compounds such as dibenzothiophene and benzothiophene in toluene as a simulated light fuel oil with a mixture of hydrogen peroxide as the oxidant and various acids as the catalyst. The influences of various parameters including reaction temperature (T), acid to sulfur molar ratio (Acid/S), oxidant to sulfur molar ratio (O/S), type of acid, and the presence of sodium tungstate and commercial activated carbon as a co-catalyst on the fractional conversion of the model sulfur compounds were investigated. The experimental data obtained were used to determine the reaction rate constant of the model sulfur... 

In this study, a simple route to the formation of DNA-gold complex has been reported, using immobilized DNA as a template. The nanoporous gold films have been prepared by the electrostatic self assembly of gold nanoparticles capped with tryptophan. Tryptophan would improve surface properties of gold nanoparticles for strongly attaching to DNA. Fourier transform infrared spectroscopy confirmed that gold nanoparticles have been capped by tryptophan. Also measured zeta potential shows that there are positive charges on the surface of gold nanoparticles. Investigations by atomic force microscopy substantially confirm that tryptophan-capped gold nanoparticles can be bonded to DNA template... 

There are high attractions in the development of conducting polymer (CP) coatings to improve the electrochemical properties and biocompatibility of electrodes in the area of biosensors. A new type of the modified electrodes is prepared in a layer-by-layer process by using multi-walled carbon nanotube (MWCNT) and poly-pyrrole. In this procedure, the glassy carbon electrode is casted by a drop suspension of MWCNT, which leads to form a thin film of nanotube on its surface. In the second step, electrochemical polymerization of pyrrole in the presence of tiron (used as doping anion) is performed on the surface of the MWCNT pre-coated electrode. The modification procedure led to fabrication of a... 

In this investigation a new type of superabsorbent hydrogel based on agar was prepared, and the effect of the feed ratio of some components (acrylic acid, MBA, APS and agar) on the swelling capacity of the hydrogel was systematically studied. Maximum water absorbency of the optimized final product was found to be 1,100∈g/g in distilled water. The structure of the hydrogel was characterized by FT-IR method and morphology of the samples was examined by scanning electron microscopy (SEM). Swelling properties of optimized hydrogel sample in different swelling mediums were investigated. The optimum hydrogel were also loaded with potassium nitrate and its potential for controlled release of... 

The use of super-swelling polymers is steadily increasing and the applications in industry are continuing to grow. With the authorization of the superabsorbents in food packaging by the Food and Drug Administration recently, demand may soon take off in the market. However, the increase in prices of petroleum products in recent years may be a drawback for these acrylic-based materials. Thus, there is now a need to develop natural-based super-swelling hydrogels which are more economical and environment friendly. In addition, the super-swelling gels are promising novel functions in the biomedical and pharmaceutical applications. This review is aimed to highlight research and trends in protein-... 

A chemically modified carbon-paste electrode (CPE) is prepared by incorporating congo red (CR) immobilized on multi-walled carbon nanotube (MWCNT). The results show that CR is effectively immobilized on the surface of MWCNT under the ultrasonic agitation in aqueous solution and further incorporating the nafion. The prepared electrode, due to the electrostatic repulsions between the CR and ascorbate anion, is capable to mask the response of the ascorbic acid (AA) completely and provide an effective method for the detection of minor amounts of uric acid (UA) in the presence of high concentrations of AA. On the other hand, an increase in the microscopic area of the electrode by addition of...