Sharif Digital Repository

Monometallic and bimetallic supported metal oxides catalysts on γ-alumina were prepared by heterogeneous deposition-precipitation. The γ-alumina used as a support was synthesized by the sol-gel and the co-precipitation methods. Supports and catalysts were characterized by Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The performance of the prepared catalysts was studied for total oxidation of toluene in air at different relative humidity and oxidation temperatures. Efficiency of bimetallic catalysts for deep oxidation of toluene was... 

Frequent air pollution episodes have been reported for Tehran, Iran, mainly because of critically high levels of fine particulate matter (PM2.5). The composition and sources of these particles are poorly known, so this study aims to identify the major components and heavy metals in PM2.5along with their seasonal trends and associated sources. 24-hour PM2.5samples were collected at a main residential station every 6 days for a full year from February 2014 to February 2015. The samples were analyzed for ions, organic carbon (including water-soluble and insoluble portions), elemental carbon (EC), and all detectable elements. The dominant mass components, which were determined by means of... 

The spatiotemporal variability of ambient volatile organic compounds (VOCs) in Tehran, Iran, is not well understood. Here we present the design, methods, and results of the Tehran Study of Exposure Prediction for Environmental Health Research (Tehran SEPEHR) on ambient concentrations of benzene, toluene, ethylbenzene, p-xylene, m-xylene, o-xylene (BTEX), and total BTEX. To date, this is the largest study of its kind in a low- and middle-income country and one of the largest globally. We measured BTEX concentrations at five reference sites and 174 distributed sites identified by a cluster analytic method. Samples were taken over 25 consecutive 2-weeks at five reference sites (to be used for... 

Various aspects of land use regression (LUR) models for volatile organic compounds (VOCs) were systematically reviewed. Sixteen studies were identified published between 2002 and 2017. Of these, six were conducted in Canada, five in the USA, two in Spain, and one each in Germany, Italy, and Iran. They were developed for 14 different individual VOCs or groupings: benzene; toluene; ethylbenzene; m-xylene; p-xylene; (m/p)-xylene; o-xylene; total BTEX; 1,3-butadiene; formaldehyde; n-hexane; total hydro carbons; styrene; and acrolein. The models were based on measurements ranging from 22 sites in El Paso (USA) to 179 sites in Tehran (Iran). Only four studies in Rome (Italy), Sabadell (Spain),... 

The aim of this study is to introduce an extractive phase based on gradient concept by continuous changing in chemical functional groups for non–targeted analysis. For this purpose, three different two–component coatings containing (3–aminopropyl)trimethoxysilane (APTES) as polar and either phenyltriethoxysilane (PTES), octyl–trimethoxysilane (OTMS) or methyltrimethoxysilane (MTMS) as nonpolar precursors were formed on the modified stainless steel wires using controlled rate infusion (CRI) method. The presence of polar and/or non–polar functional groups on the surface of substrate was evaluated by Fourier–transform infrared spectroscopy (FTIR) together with contact angles determined... 

In this study, we implement a numerical model to predict secondary organic aerosol (SOA) formation from semi- and intermediate-volatility organic compounds emitted from in-use gasoline and diesel vehicles. The model is formulated based on the volatility basis set (VBS) approach, and it accounts for OH oxidation of unspeciated low-volatility organics, which are classified by their volatility. This model incorporates SOA formation data from smog chamber and emission measurements of vehicle exhaust in a Hybrid framework to calculate the contribution of both traditional and non-traditional SOA precursors to total SOA formation observed in photo-oxidation experiments. Emission and SOA formation... 

Volatile organic compounds are a major cause of air pollution; therefore, VOCs are a serious fulmination for the environment. According to studies, adsorption processes have a high performance for the removal of pollutants that by selecting the proper absorbent, efficiency will be improved. In this work performance of two metal organic frameworks are studied so porous materials named MIL-101(Cr) and MIL-53(Fe) as an adsorbent for the removal of ethylbenzene have been synthesized hydrothermally. The materials were characterized by Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) analysis, adsorption of ethylbenzene, field emission scanning electron microscopy (FESEM),... 

In this study, dynamic adsorption behavior of different gaseous volatile organic compounds (VOCs) on a new modified M-MIL-101(Cr) was investigated with a great emphasis on gasoline adsorption. The M-MIL-101(Cr) was synthesized, along with comprehensive purification procedures, using a new linker to cluster molar ratio (2:1 instead of 1:1) and different modulators (i.e. HF and HNO3). All prepared adsorbents were characterized by XRD, FTIR, FE-SEM and N2 adsorption-desorption at 77 K. The results showed that surface area and pore volume of the M-MIL-101@Free (i.e. modified MIL-101(Cr) with using any modulator) which were 4293 m2/g and 2.43 cm3/g, greatly elevated up to 37.2% and 71.6% against... 

To improve the thermal stability of starch in water-based drilling fluid, monoethanolamine (MEA) was added, and the effect was investigated by laboratory experiment. The experimental results show that the addition of monoethanolamine (MEA) increases the apparent viscosity, plastic viscosity, dynamic shear force, and static shear force of the drilling fluid, and reduces the filtration rate of drilling fluid and thickness of mud cake apparently. By creating hydrogen bonds with starch polymer, the monoethanolamine can prevent hydrolysis of starch at high temperature. Starch, as a natural polymer, is able to improve the rheological properties and reduce filtration of drilling fluid, but it works... 

In this work, an expression for the free volume Gibbs energy model based on the local composition concept (LCC) has been proposed in correlating the solubility, the partitioning and the surface tension of β-lactam, tetracycline, fluoroquinolone and chloramphenicol antibiotic groups in water, alcohol, ketone, trihalomethane, ether and ester solvent groups. Similar to the LCC models the proposed model has two combinatorial and residual terms. The extended Guggenheim model is used as combinatorial term and a new local composition-based model, which is the extended local area fraction NRTL-NRF model, is proposed for the residual term. The results obtained from the proposed model have been... 

A headspace solid-phase dynamic extraction (HS-SPDE) technique was developed by the use of polypyrrole (PPy) sorbent, electropolymerized inside the surface of a needle, as a possible alternative to solid-phase microextraction (SPME). Thermal desorption was subsequently, employed to transfer the extracted analytes into the injection port of a gas chromatography-mass spectrometry (GC-MS). The PPy sorbent including polypyrrole-dodecyl sulfate (PPy-DS) was deposited on the interior surface of a stainless steel needle from the corresponding aqueous electrolyte by applying a constant deposition potential. The homogeneity and the porous surface structure of the coating were examined using the... 

Accelerated Michael-type Friedel-Crafts alkylation of naphthols with nitrostyrenes in the presence of water is reported. The procedure is simple, catalyst-free, and affords good yields of the products. © 2009 Elsevier Ltd. All rights reserved  

Synthesis of dimethyl ether (DME) via methanol dehydration were investigated over various catalysts, and via direct CO hydrogenation over hybrid catalysts composed of Al-modified H-Mordenite zeolite and Cu/ZnO/ZrO 2. H-Mordenite zeolite exhibited the highest activity in dehydration of methanol. However, its selectivity toward dimethyl ether was rather low. For this reason, the H-Mordenite was modified. Modification of zeolites was performed by wet impregnation method and considered catalysts were characterized by AAS, XRD and NH3-TPD analyses. Results of catalytic tests indicated that H-Mordenite modified with 8 wt% aluminum oxide was the best catalyst for synthesis of dimethyl ether from... 

The volatile components of Iranian saffron were extracted using ultrasonic solvent extraction (USE) technique and then were separated and detected by gas chromatography-mass spectrometry (GC-MS). Variables affecting the extraction procedure were screened by using a 25-1 fractional factorial design and among them; sample amount, solvent volume, solvent ratio and extraction time were optimized by applying a rotatable central composite design (CCD). The optimum values of factors were: 2.38 g sample, 29.04 mL solvent, 69.23% MeOH solvent ratio and 71.8 min for the extraction time. Forty constituents were identified for Iranian saffron by GC-MS representing 90% of the total peak area. The major... 

The interactions between four different gas molecules (methanol, o-xylene, p-xylene and m-xylene) and Ni-decorated monolayer MoS2 were investigated by means of density functional computations to exploit its potential application as a gas sensor. The electronic properties of the Ni-decorated monolayer MoS2 and gas molecule (adsorbent–adsorbate properties) strongly depend on the Ni-decorated monolayer MoS2 structure and the molecular configuration of the adsorbate. The adsorption properties of volatile organic compound (VOC) molecules on Ni-decorated MoS2 has been studied taking into account the parameters such as adsorption energy, energy bandgap, density of states, and Mulliken charge... 

Hexagonal core–shell SiO2[–MOYI]Cl–]Ag nanoframeworks were synthesized via surface modification of hexagonal silica nanoparticles prepared from perlite (EP) as a cheap and abundant raw material. The prepared samples were well characterized by X-ray diffraction powder (XRD), energy dispersive X-ray (EDX), diffuse reflectance spectroscopy (DRS), Brunauer–Emmett–Teller (BET) specific surface area analysis, fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). The XRD patterns confirmed that Ag and AgCl crystalline phases were successfully loaded on the surface. The TEM images were also implied that the... 

A chemiresistive sensor is described for the lung cancer biomarker hexanal. A composite consisting of molecularly imprinted polymer nanoparticles and multiwalled carbon nanotubes was used in the sensor that is typically operated at a voltage of 4 V and is capable of selectively sensing gaseous hexanal at room temperature. It works in the 10 to 200 ppm concentration range and has a 10 ppm detection limit (at S/N = 3). The sensor signal recovers to a value close to its starting value without the need for heating even after exposure to relatively high levels of hexanal  

A gradient derived base layer extractive phase was synthesized and applied for the determination of volatile organic compounds (VOCs) in saliva samples using the headspace cooled in–tube microextraction (HS–CITME) method. The base layers from three different sols of phenyltriethoxysilane (PTES), octyltrimethoxysilane (OTMS) and methyltrimethoxysilane (MTMS) as nonpolar precursors were individually dip coated on the stainless steel wires (SSW). Then, the hydrolyzed polar precursor aminopropyltriethoxysilane (APTES) reacted with the silanol groups already formed on the surface of SSWs via controlled rate infusion (CRI) method. The presence of polar and non–polar functional groups on the... 

With over 8 million inhabitants and 4 million motor vehicles on the streets, Tehran is one of the most crowded and polluted cities in the Middle East. Frequent exceedances of national daily PM2.5 limit have been reported in this city during the last decade, yet, the chemical composition and sources of fine particles are poorly determined. In the present study, 24-hour PM2.5 samples were collected at two urban sites during two separate campaigns, a one-year period from 2014 to 2015 and another three-month period at the beginning of 2017. Concentrations of organic carbon (OC), elemental carbon (EC), inorganic ions, trace metals and specific organic molecular markers were measured by chemical... 

In this study, the different parts of carthamus tinctorius plant, including petal (SPE), leaf (SLE), and shoot (SSE), have been extracted. Adsorption of the extracts on mild steel in 3.5 wt. % NaCl solution was evaluated employing electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, and electrochemical noise measurements (EN). The field-emission scanning electron microscopy (FE-SEM) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) were employed to appraise the morphology of the samples surface subjected to the test solutions. According to the EIS results, the maximum adsorption efficiency belonged to the solution containing 1 g L−1 of...