Sharif Digital Repository

In this work, a facile ionic liquid-mediated method was utilized to fabricate an efficient photocatalyst for environmental remediation. The eco-friendly aspect of the treatment was explored through an in-vivo toxicity bioassay. ZnO particles, prepared by a combined solid state-pyrolysis method, were coated by 1-methyl-3-(oxiran-2ylmethyl)-1H-imidazolium-3-chloride ([MOYI]Cl) ionic liquid. Then, Ag/AgCl species were grown on the surface to make a heterojunction system leading to efficient charge separation and light absorption extension to the visible domain. The products were characterized by XRD, FTIR, SEM, EDX, DRS, BET, and PL analysis. Photocatalytic performance of the nanostructures was... 

The morphology of the perovskite layer, the effective extraction of the charge carriers, and their transport are the main factors determining the power conversion efficiency (PCE) of the perovskite solar cells (PSCs). In this work, we demonstrated that the geometric and electronic structures of the PSCs could be modified by using a conductive polymer additive in the lead (Pb) halide layer prepared by a two-step deposition method. Polypyrrole (PPy) as a conductive polymer is used in the perovskite layers which could increase the PCE of CH3NH3PbI3-xClx mixed-halide PSCs. By adding an optimized amount of PPy, PCE has been raised from 10.4 to 13.2%. PPy acts as a conductive channel facilitating... 

A superhydrophobic extractive phase was prepared and packed in a needle trap microextraction device for extraction of volatile organic compounds, followed by their determination by gas chromatography. The superhydrophobic phase was prepared by surface modification of melamine formaldehyde (MF) sponge embedded by reduced graphene oxide (rGO). The overall properties of the modified MF along with its high sorption capacity and low cost fabrication were indicative of its feasibility to be highly suitable for extraction of organic pollutants. The determined water contact angle (>150o) from the surface of melamine formaldehyde–reduced graphene oxide (MF–rGO) revealed its high affinity toward... 

Gold nanoparticles are potentially very attractive components for therapeutic delivery since they can be synthesized with any diameter from 1 to 200 nm to carry a payload of therapeutic molecules into a cell without triggering an immune response. Gold nanoparticles must undergo surface transformations before coupling to therapeutic molecules to become eligible for this purpose. It is now more understood that amine groups can bind to gold nanoparticles strongly, which has enabled surface modification of gold nanoparticles with amino acid lysine through its amine group. These lysine capped gold nanoparticles can further be coupled to therapeutic molecules for delivery purposes. In this study... 

Molecular structural mechanics is implemented to model vibrational behavior of defect free single-layered graphene sheets (SLGSs) at constant temperature. To mimic these two-dimensional layers, zigzag and armchair models with cantilever and bridge boundary conditions are adopted. Fundamental frequencies of these nano structures are calculated, and it is perceived that they are independent of the chirality and aspect ratio. Effects of point mass and atomistic dust on the fundamental frequencies are also considered in order to investigate the possibility of using SLGSs as sensors. Results of exhibit the principle frequencies are highly sensitive to the added mass in the order of 10-6fg.... 

The process kinetics of a lab-scale upflow aerobic immobilized biomass (UAIB) reactor using simulated sugar-manufacturing wastewater as feed was investigated. The experimental unit consisted of a 22 l reactor filled with high porosity pumice stone. The UAIB reactor was tested under different organic loads and different hydraulic retention times (HRT) and the substrate loading removal rate was compared with prediction of Stover-Kincannon model, second-order model and the first order substrate removal model. After obtaining steady-state conditions, organic loading rate was increased from 750 to 4500 g COD/m3 day to resemble wastewater from sugar production lines, and hydraulic retention time... 

D-glucosamine, as a representative polyfunctional compound, is a bioactive amino sugar. In this study, the gas phase thermochemical properties of D-glucosamine, including its Metal Ion Affinity (MIA), metal binding sites, Anion Affinity (AA), acidity and proton affinity, have been explored, using the Density Functional Theory (DFT) and a 6-311++G**basis set. The summary of the MIA and AA results (in kcal/mol-1) are: Li+ = 67.6, Na+ = 51.1, K+ = 37.3, Mg2+ = 207.9, Ca2+ = 150.4, Zn2+ = 251.2, Cl- = 27.4, CN- = 28.0. The acidity values calculated at different sites, including four -OH groups and one -NH2 group, range from 344.0 to 373.0 kcal/mol-1. These results, surprisingly, indicate how... 

The perovskite oxide BaTiO3, doped with Ge oxides oxidized methane to C2 coupled hydrocarbons. The ultraviolet-visible spectra of pure barium titanate and Ge doped BaTi(1-x) GexO3 (x=0.05 ,0.1) were compared. The pure barium titanate exhibited an ultraviolet absorption effect. The addition of GeO2 resulted in an increase in absorption of wavelength. Therefore, small amount of Ge decreased band gap energy. Oxygen is inserted by nucleophilic attack which may be considered as an acid-base process. For promoted BaTiO3 catalysts with stable cation valance, electron donation ability of lattice oxygen is parallels to its ability of adsorb and active oxygen, and decrease the chance of deep oxidation... 

A study was conducted to report an observation on the effect of nanoclay fillers on the α-relaxation in an epoxy resin. The observation provided useful facts about glass transition processes in nanoclay-filled epoxy composites. The investigation involved the synthesis of intercalated-exfoliated clay-epoxy compounds, by swelling an organophilic montmorillonite in an aromatic epoxy resin and polymerization. The epoxy resin used in the study was a diglycidyl ether of bisphenol A (DGEBA), EPON 828, with an equivalent weight of 184-190 g/eq from Hexion Specialty Chemicals. The epoxy resin was cured with piperidine, obtained from Sigma-Aldrich. Nanomer® 1.30E. An octadecyl amine treated... 

The liquid-phase dehydration of methanol to dimethyl ether was investigated over various materials including synthetic zeolites, namely, ZSM-5, Y, Mordenite, Ferrierite and Beta as well as silica and alumina. The key characters investigated were the Si/Al ratio and cation exchange. The results showed that the Mordenite zeolite exchanged with H+ exhibited the highest activity in dehydration of methanol. After finding the most active catalyst, the Mordenite zeolite was modified with Cu, Zn, Ni, Al, Zr, Mg and Na via wet-impregnation method to further improve its selectivity, and characterized by AAS, XRD, NH3-TPD, NH3-FT-IR and BET surface area techniques. It was found that these materials... 

Solid-phase microextraction (SPME) coupled to gas chromatography (GC) was applied to the extraction of phenol and some of its volatile derivatives in water samples. The SPME fiber consisted of a thin layer of polyaniline, which was electrochemically coated on a fine Pt wire. The stability of the coating was such that it could be used at temperatures as high as 325 °C, without any deterioration. The effects of various parameters affecting the extraction efficiency were studied, simultaneously. From these, optimization of the extraction temperature, extraction time, coating thickness, sample pH, salt concentration and desorption time was carried out by means of a (26-2) fractional factorial... 

Herein, MIL-101(Fe), CoFe2O4, novel binary (MIL-101(Fe)/CoFe2O4, MIL-101(Fe)/GO and CoFe2O4/GO), and ternary (MIL-101(Fe)/CoFe2O4/(3%)GO and MIL-101(Fe)/CoFe2O4/(7%)GO) magnetic composites based upon the MIL-101(Fe) were synthesized. The XRD, FESEM, TEM, EDX, BET-BJH, FTIR, VSM, DRS, PL, EIS and other electrochemical analyses were applied to characterize samples. The MIL/CoFe2O4/(3%)GO demonstrated the best performance compared to other samples for visible light photocatalytic and photo-Fenton-like degradation of Direct Red 23 (DtR-23), Reactive Red 198 (ReR-198) dyes as well as Tetracycline Hydrochloride (TC-H) antibiotic. Degradation of dyes using the ternary composite after 70 min of... 

In this work, a facile ionic liquid-mediated method was utilized to fabricate an efficient photocatalyst for environmental remediation. The eco-friendly aspect of the treatment was explored through an in-vivo toxicity bioassay. ZnO particles, prepared by a combined solid state-pyrolysis method, were coated by 1-methyl-3-(oxiran-2ylmethyl)-1H-imidazolium-3-chloride ([MOYI]Cl) ionic liquid. Then, Ag/AgCl species were grown on the surface to make a heterojunction system leading to efficient charge separation and light absorption extension to the visible domain. The products were characterized by XRD, FTIR, SEM, EDX, DRS, BET, and PL analysis. Photocatalytic performance of the nanostructures was... 

Graphene nanoribbons (GNRs) fabricated using electron beam lithography are investigated using tip-enhanced Raman spectroscopy (TERS) with a spatial resolution of 5 nm under ambient conditions. High-resolution TERS imaging reveals a structurally modified 5-10 nm strip of disordered graphene at the edge of the GNRs. Furthermore, hyperspectral TERS imaging discovers the presence of nanoscale organic contaminants on the GNRs. These results pave the way for nanoscale chemical and structural characterisation of graphene-based devices using TERS. © The Royal Society of Chemistry 2021  

Biological treatment of waste gas styrene vapor was investigated in a three-stage bench-scale biofilter. Yard waste compost mixed with shredded hard plastics in a 25:75 v/v ratio of plastics:compost was inoculated with thickened municipal activated sludge. Microbial acclimation to styrene was achieved by exposing the system to an inlet concentration (CIn) of 0.25 g m -3 styrene and an empty bed retention time (EBRT) of 360 s for 30 days. Under steady-state conditions, maximum elimination capacity (EC) obtained was 45 g m-3 h-1 at a loading rate (L) of 60 g m -3 h-1 (CIn of 2 g m-3 and EBRT of 120 s). Reduction of retention time adversely impacted the performance resulting in the maximum EC... 

Electrochemical oxidation of catechol in the presence of 3-mercapto-1,2,4-triazole (MTA) as a nucleophile in aqueous buffered solutions was studied by cyclic voltammetry and controlled-potential coulometry. The mechanism of electrochemical reaction is confirmed by spectrophotometric tracing in various times of controlled-potential coulometry. The voltammetric and spectrophotometric foundations indicate that a 1,4 Michael addition of MTA from its thiol moiety to the electrochemically derived o-quinone is occurred. The electrochemical synthesis of Michael addition product has been successfully accomplished by controlled-potential coulometry in a divided H-type cell and the reaction product was... 

An immersed solvent microextraction (SME) method was successfully developed for the trace enrichment of s-triazine herbicides from aquatic media. A microdrop of butyl acetate was applied as the extraction solvent. After extraction, the microdrop was introduced directly into a gas chromatography-mass spectrometry (GC-MS) injection port. Some important extraction parameters such as type of solvent, extraction time, stirring rate, and temperature were investigated and optimized. The highest possible microdrop volume of 3 μl, a sampling temperature of 60°C, and use of butyl acetate are major parameters to obtain high enrichment factors. The enrichment factor and linearity was studied by... 

The need for the control of Volatile Organic Compounds (VOCs) has led engineers to modify wastewater aeration tank systems. In this research, air recirculation has been investigated as a possible VOC control strategy for these systems. A steady-state mathematical model of VOC emission rates has been developed from the fundamentals of VOC convection, volatilization and biodegradation. This model has been used to study the effect of aeration recirculation in enhancing the biodegradation of VOCs in the system, using dichloromethane as a typical VOC. A feasibility study considering plants of various sizes is needed to compare the costs and benefits of air recirculation to other VOC control... 

Two laboratory-scale biofilters filled with the same type of packing material were operated at different gas flow rates and influent concentrations of toluene and xylene in order to investigate their performance in treating waste gas streams. The columns contained a mixture of municipal compost as a base material and wood chips as a bulking agent in an 80:20 ratio; the porosity was 54%. Microbial acclimation was achieved by addition of nutrient-enriched solution along with pollutants for a week by daily mixing and natural aeration. During the start-up of the systems with inlet concentrations of 20 and 70 ppm for toluene and xylene, respectively, high biomass growth resulted in pressure drops... 

Two newly synthesised Schiff bases [H2A3, N,N′-ortho-phenylene(salicylaldimine-acetylacetone imine) and H2A4, N,N′-ortho-phenylene(salicylaldimine-2-hydroxy-1-naphthaldimine)] were studied as inhibitors for the corrosion of mild steel in 0.5 mol dm-3 sulphuric acid. Results of weight loss, electrochemical impedance and Tafel polarisation measurements consistently identify both compounds as good inhibitors, with efficiencies of around 95% at a concentration of 400 ppm. The inhibition is in both cases of a mixed anodic-cathodic nature. Differences in inhibition efficiency between H2A3 and H2A4 are correlated with their chemical structures. Several adsorption isotherms are assessed, and the...