Sharif Digital Repository

The architecture of a hardwired simulator for implementation of a discrete event-driven simulation of digital systems at the logic level is presented. In the design of this system, attempts have been made to utilize techniques of high performance computing to have a system capable of simulating the digital circuits rapidly. The centralized event-driven simulation algorithm chosen here, has the advantages of being efficient and conceptually straightforward. The high reliability of the simulator has been taken care of through a collection of handshake signals between each two of the three main modules. © Sharif University of Technology, December 2007  

A unified multiple-access performance analysis and comparison of three multicarrier spread-spectrum multiple-access schemes, namely, MC-CDMA (Multicarrier Code-Division Multiple-Access), MC-FH (Multicarrier Frequency Hopping) and a hybrid of the above systems, called DS-MC-FH (Direct-Sequence MC-FH), in a multirate environment, where each user can have several multirate services, is provided. In MC-CDMA and MC-FH systems, users and their diverse services are differentiated by means of only one kind of signature code. However, in a DS-MCFH scheme, different users and different services of the same user are distinguished through the first and second signature codes, respectively. The... 

There is an increasing interest and use of energy foundation worldwide. Full-scale tests, physical model tests at one Earth's gravity and at elevated gravity in a geotechnical centrifuge and numerical simulations have been widely reported in the literature. Almost all studies have focused on single energy piles (EPs) and pile groups subjected to symmetrical thermal loads, although it is not unusual to have energy pile groups stressed by non-symmetrical thermal loads. In this study, a series of non-symmetrical thermal loading centrifuge model tests were conducted in saturated soft clay (OCR = 1.7), which is much vulnerable to temperature changes. The tests aim to investigate the effects of... 

The Finite element method was used for evaluation of the effects of material properties on the mechanical performance of the new geometry designed for the Z-shaped open-cell femoral artery self-expanding stent, made of Nitinol wire, by application of crushing force. The behavior of the stents, having two sets of properties, was compared. The stents with higher Af temperature show better clinical behavior due to lower chronic outward force, higher radial resistive strength and more suitable superelastic behavior. Model calculations show that a large change of Af temperature could exert a substantial effect on the practical performance of the stent  

Controlling evaporation plays an essential role in arid and semi-arid water resources systems where it accounts for a considerable amount of reservoirs outflow. In this study, we have evaluated evaporation reduction efficiency of different kinds of self-assembled nano-thickness films. The films consist of six different combinations of stearyl and cetyl alcohols with additives such as jojoba oil, stearic acid, and calcium hydroxide. The study lasted from July to August and utilized two pairs of class A evaporation pans: one pair was semi-floating on Chitgar lake water surface while the other one was located on the shore. The experimental results showed that a monolayer containing 3:1 stearyl... 

An algorithm for determining optimal reserve capacity in a power market is presented in this paper. Optimization process in the proposed algorithm is based on the cost-benefit trade off. Market clearance is executed with consideration of uncertainties of power system components in an aggregated environment. It is assumed that both generating units and interruptible loads participate in the reserve market. In addition, customers' reliability requirements are considered as constraints for decision making process of ISO. The rendered method considers random outages of generating units and transmission lines and determined outage of interruptible loads and employs Monte Carlo Simulation (MCS)... 

An algorithm for determining optimal reserve capacity in a power market is presented in this paper. Optimization process in the proposed algorithm is based on the cost-benefit trade off. Market clearance is executed with consideration of uncertainties of power system components in an aggregated environment. It is assumed that both generating units and interruptible loads participate in the reserve market. In addition, customers' reliability requirements are considered as constraints for decision making process of ISO. The rendered method considers random outages of generating units and transmission lines and determined outage of interruptible loads and employs Monte Carlo Simulation (MCS)... 

In this study, the self-adaptive evolutionary (SaE) agent is employed to structure the contributing elements to process the management of extreme learning machine (ELM) architecture based on a logical procedure. In fact, the SaE algorithm is utilized for possibility of enhancing the performance of the ELM to estimate daily soil temperature (ST) at 6 different depths of 5, 10, 20, 30, 50 and 100 cm. In the developed SaE-ELM model, the network hidden node parameters of the ELM are optimized using SaE algorithm. The precision of the SaE-ELM is then compared with the ELM model. Daily weather data sets including minimum, maximum and average air temperatures (Tmin, Tmax and Tavg), atmospheric... 

This study introduces a simple and efficient method to determine the peak floor acceleration (PFA) at different performance levels for three types of plane reinforced concrete (RC) structures: moment-resisting frames (MRFs), infilled–moment-resisting frames (I-MRFs), and wall-frame dual systems (WFDSs). By associating the structural maximum PFA response with the deformation response, the acceleration-sensitive nonstructural components, and the building contents, can be designed to adhere to the performance-based seismic design of the supporting structure. Thus, the proposed method can accompany displacement-based seismic design methods to design acceleration-sensitive nonstructural elements... 

Design of centrifugal compressors can be accomplished using methods provided in text books and open literature. In this general approach, after determination of dimensions in meridional plane, blade profiles are designed using aerodynamic methods. Then, some blades are trimmed at the beginning to avoid inlet blockage. But there is no clear guidance on how this trimming must be performed. With this widely implemented method, splitter blades have the same profile as main ones. In this research, blade profiles and dimensions of the compressor impeller are not changed while the effect of changes in the position and angle of splitters leading edge are investigated. An optimization scheme is... 

Control Performance Assessment (CPA) and tuning of PID controllers are studied in this paper. We propose a framework for systematic analysis of the tradeoff between the structural complexity of the controller and its performance. As the measure of the controller performance, an LQG based index is used. The problem is augmented with an additional term which forces sparsity on the complexity of a decentralized PID controller. The desired complexity is controlled via a weighting parameter which determines the cost of each additional element (i.e., P, I, and D terms). The result is a decentralized multivariable PID controller in which the complexity of each loop controller is optimized such that... 

Control Performance Assessment (CPA) and tuning of PID controllers are studied in this paper. We propose a framework for systematic analysis of the tradeoff between the structural complexity of the controller and its performance. As the measure of the controller performance, an LQG based index is used. The problem is augmented with an additional term which forces sparsity on the complexity of a decentralized PID controller. The desired complexity is controlled via a weighting parameter which determines the cost of each additional element (i.e., P, I, and D terms). The result is a decentralized multivariable PID controller in which the complexity of each loop controller is optimized such that... 

The present study conducts a comprehensive comparative techno-economic analysis of some near-term sensible thermal energy storage (TES) alternatives to the ‘standard’ two-tank molten salt system for concentrated solar power (CSP) plants. As such, we conducted detailed, relative annual transient simulations for single-medium thermocline (SMT), dual-media thermocline (DMT), and shell-and-tube (ST) systems. To be consistent with recent literature, the DMT and ST systems use concrete with a porosity of 0.2 (e.g. where concrete occupies 80% of the system) as their low cost filler material. The systems were integrated into a validated 19.9 MWe Gemasolar CSP model, which has a solar multiple of... 

Due to demands for the economical operations of power plants and environmental awareness, performance control of a boiler-turbine unit is of great importance. In this paper, a nonlinear Multi Input-Multi Output model (MIMO) of a utility boilerturbine unit is considered. Drum pressure, generator electric output and drum water level (as the output variables) are controlled by manipulation of valves position for fuel, feedwater and steam flows. After state space representation of the problem, two controllers, based on gain scheduling and feedback linearization, are designed. Tracking performance of the system is investigated and discussed for three cases of 'near', 'far' and 'so far' setpoints.... 

The use of solar energy concentration systems for achieving performance enhancements in the Photovoltaic/thermal hybrid solar systems and reduction of initial costs is an idea that has been studied for years. In this article a new structure for parabolic trough photovoltaic/thermal collector is proposed and its thermal and electrical performances are experimentally investigated. The receiver of this concentrator contains a triangular channel with an outer surface covered with photovoltaic cells and thermoelectric modules with a specific arrangement so that in addition to absorbing heat, a larger portion of the solar radiation is directly converted to electricity. Hence, the performance of... 

Recent studies have indicated the need of considering aftershocks in the seismic design/assessment of structures. This article investigates the effect of sequential mainshock and aftershock earthquakes on eccentrically braced steel frames with vertical energy-absorbing links. To achieve this, 4, 8 and 12-storey frame buildings are modelled in Perform3D® software considering non-linear behaviour of materials and components. The frames are subjected to a set of 12 main earthquake records corresponding to the required hazard level, and then subsequent aftershocks are applied using incremental dynamic analysis (IDA). To reduce the computational cost, an alternative approach is also adopted by... 

Here in this study, successful conversion of visible light into electricity has been achieved through utilizing microalgal pigments as a sensitizer of nanostructured photo-electrode of dye-sensitized solar cells (DSSCs). For the first time, photosynthetic pigments extracted from microalgae grown in wastewater is employed to imitate photosynthesis process in bio-molecule-sensitized solar cells. Two designs of photoanode were employed: 10μm nanoparticular TiO2 electrode and 20μm long self-ordered, vertically oriented nanotube arrays of titanium dioxide films. Microalgal photosynthetic pigments are loaded on nanostructured electrodes and their photovoltaic performances have been investigated.... 

To ensure an optimized borehole in terms of heat capacity and cost-effectiveness, it is necessary to predict the heating performance of underground U-tube heat exchangers (boreholes) so that proper parameters such as length, diameter, material, etc. can be designed and selected. To this end, employing reliable equations is essential to predicting the heating performance of a borehole and also, to resolving the design issues. In this study, a single vertical U-tube borehole with a constant wall temperature is considered and analytical equations for temperature distribution in the surrounding ground around the borehole are evaluated based on one- and two-dimensional heat conduction,... 

Many heavy oil reservoirs contain discontinuous shales which act as barriers or baffles to flow. However, there is a lack of fundamental understanding about how the shale geometrical characteristics affect the reservoir performance, especially during polymer flooding of heavy oils. In this study, a series of polymer injection processes have been performed on five-spot glass micromodels with different shale geometrical characteristics that are initially saturated with the heavy oil. The available geological characteristics from one of the Iranian oilfields were considered for the construction of the flow patterns by using a controlled-laser technology. Oil recoveries as a function of pore... 

A new strategy for enhancing the efficiency and reducing the production cost of TiO 2 solar cells by design of a new formulated TiO 2 paste with tailored crystal structure and morphology is reported. The conventional three- or four-fold layer deposition process was eliminated and replaced by a single layer deposition of TiO 2 compound. Different TiO 2 pastes with various crystal structures, morphologies and crystallite sizes were prepared by an aqueous particulate sol-gel process. Based on simultaneous differential thermal (SDT) analysis the minimum annealing temperature to obtain organic-free TiO 2 paste was determined at 400°C, being one of the lowest crystallization temperatures of TiO 2...