Sharif Digital Repository

Perovskite solar cells have been constructed under ambient conditions by using 2,2',7,7'-Tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-OMeTAD) mixed with a small quantity of soluble tetra-n-butyl substituted copper phthalocyanine as hole transporting material. The introduction of the phthalocyanine derivative resulted in an impressive increase of cell efficiency, which changed from 10.4% in the absence to 15.4% in the presence of phthalocyanine. This effect is related to the creation of deep traps in the hole transporting phase which block back-travelling electrons as well as to the improvement of the structural quality of the spiro-OMeTAD film in the presence of... 

The compatibility of atomic layer deposition directly onto the mixed halide perovskite formamidinium lead iodide:methylammonium lead bromide (CH(NH2)2, CH3NH3)Pb(I,Br)3 (FAPbI3:MAPbBr3) perovskite films is investigated by exposing the perovskite films to the full or partial atomic layer deposition processes for the electron selective layer candidates ZnO and SnOx. Exposing the samples to the heat, the vacuum, and even the counter reactant of H2O of the atomic layer deposition processes does not appear to alter the perovskite films in terms of crystallinity, but the choice of metal precursor is found to be critical. The Zn precursor Zn(C2H5)2 either by itself or in combination with H2O during... 

Organometal halide perovskite solar cells have been constructed using soluble tetra-n-butyl-copper phthalocyanine as hole transporting material. Devices were constructed and characterized under ambient conditions of 50–60% ambient humidity. Soluble copper phthalocyanine gave a modest PCE of 7.3% but when a buffer layer of either Al2O3 or graphene oxide was introduced between the perovskite and the hole transporting layer the cell efficiency extensively increased and reached 14.4% in the presence of graphene oxide. Corresponding data obtained by employing the standard spiro-OMeTAD as hole transporter gave equivalent performance. Combination then of tetra-n-butyl-copper phthalocyanine with... 

Interfacial studies and band alignment engineering on the electron transport layer (ETL) play a key role for fabrication of high-performance perovskite solar cells (PSCs). Here, an amorphous layer of SnO2 (a-SnO2) between the TiO2 ETL and the perovskite absorber is inserted and the charge transport properties of the device are studied. The double-layer structure of TiO2 compact layer (c-TiO2) and a-SnO2 ETL leads to modification of interface energetics, resulting in improved charge collection and decreased carrier recombination in PSCs. The optimized device based on a-SnO2/c-TiO2 ETL shows a maximum power conversion efficiency (PCE) of 21.4% as compared to 19.33% for c-TiO2 based device.... 

We proposed two different time-dependent modeling approaches for variation of device characteristics of perovskite solar cells under stress conditions. The first approach follows Sah-Noyce-Shockley (SNS) model based on Shockley–Read–Hall recombination/generation across the depletion width of pn junction and the second approach is based on thermionic emission model for Schottky diodes. The connecting point of these approaches to time variation is the time-dependent defect generation in depletion width (W) of the junction. We have fitted the two models with experimental data reported in the literature to perovskite solar cell and found out that each model has a superior explanation for... 

Inverted organometal halide perovskite solar cells of p-i-n architecture allow for the employment of inorganic components that ensure longer time stability than organic charge transporters. This has been demonstrated in the present work where devices were made by employing NiO/GO and Li-modified GO/TiOx as hole and electron transporters, respectively, in comparison with popular organic components, such as PEDOT:PSS and PCBM. Cells made in the FTO/PEDOT:PSS/Perovskite/PCBM/Al composition were 25% more efficient than cells made in the FTO/NiO/GO/Perovskite/GO-Li/TiOx/Al composition but the latter was markedly more stable than the former. Emphasis has been presently given to the... 

In the past few years, organic–inorganic metal halide ABX3 perovskites (A = Rb, Cs, methylammonium, formamidinium (FA); B = Pb, Sn; X = Cl, Br, I) have rapidly emerged as promising materials for photovoltaic applications. Tuning the film morphology by various deposition techniques and additives is crucial to achieve solar cells with high performance and long-term stability. In this work, carbon nanoparticles (CNPs) containing functional groups are added to the perovskite precursor solution for fabrication of fluorine-doped tin oxide/TiO2/perovskite/spiro-OMeTAD/gold devices. With the addition of CNPs, the perovskite films are thermally more stable, contain larger grains, and become more... 

Alkaline doping (Cs, Rb) in CH3NH3PbI3 (MAPbI3) is known to enhance the stability of perovskite solar cells. The films are usually deposited using anti-solvent method, which is tricky and not applicable for large scale deposition. Besides, in case of CsxMA1−xPbI3 the amount of Cs must be carefully controlled to prevent CsI phase formation. Herein, we report an atmospheric pressure vapor assisted solution process (AP-VASP) for the growth of Cs doped MAPbI3 perovskite films that features highly uniform morphology, pin-hole free films, large grain size, as well as being scalable. The CsxMA1−xPbI3 films are formed by the reaction of Cs doped PbI2 films with MAI vapor in a simple oven. We... 

The effect of substitutional Li doping into NiOx hole transporting layer (HTL) for use in inverted perovskite solar cells was systematically studied. Li doped NiOx thin films with preferential crystal growth along the (111) plane were deposited using a simple solution-based process. Mott-Schottky analysis showed that hole carrier concentration (NA) is doubled by Li doping. Utilizing 4 % Li in NiOx improved the power conversion efficiency (PCE) of solar devices from 9.0 % to 12.6 %. Photoluminescence quenching investigations demonstrate better hole capturing properties of Li:NiOx compared to that of NiOx, leading to higher current densities by Li doping. The electrical conductivity of NiOx is... 

The efficiency of planar perovskite solar cells (PSCs) with SnO2 as electron transport layer is already more than 19% achieved under controlled atmosphere. PSCs with solution processed SnO2 show high hysteresis and low fill factor. One way to improve the planar PSCs is using buffer layer between electron transport layer and perovskite to enhance the photo-electron extraction process. In this study, SnO2 and SnO2/CdS layers were fabricated by solution process using a suspension including CdS nanoparticles synthesized via a simple solution route. Then planar PSCs with the structure of Glass/FTO/ETL/Perovskite/Sprio-OMeTAD/Au were fabricated in ambient air condition using SnO2 and SnO2/CdS as... 

Inorganic hole-transport materials (HTMs) have been frequently applied in perovskite solar cells (PSCs) and are a promising solution to improve the poor stability of PSCs. In this study, we investigate solution-processed copper indium gallium disulfide (CIGS) nanocrystals (NCs) as a dopant-free inorganic HTM in n-i-p type PSCs. Moreover, Cs0.05(MA0.17-FA0.83)0.95Pb(I0.83Br0.17)3 mixed-halide perovskite with proper crystalline quality and long-time stability was utilized as the light-absorbing layer under ambient conditions. To optimize the cell performance and better charge extraction from the perovskite layer, the Ga concentration in the Cu(In1-XGaX)S2 composition was changed, and the X... 

A modeling approach is presented for the first time to model the dependence of short-circuit current density (J sc ) and open-circuit voltage (V oc ) on the grain size g in three thin film solar cells including the emerging perovskites. The variation of J sc and V oc with the grain size (g) of three different solar cells with CdTe, CZTS and perovskite absorber layers are modelled and fitted with the experimental dataset collected from relevant literature. The experimental literature suggested that the grain size of absorber layers in solar cells is controlled during the deposition process by adjusting the growth rate, temperature and ambient. The model has been successfully applied to the... 

Perovskite solar cells (PSCs) have experienced outstanding advances in power conversion efficiencies (PCEs) by employing new electron transport layers (ETLs), interface engineering, optimizing perovskite morphology, and improving charge collection efficiency. In this work, we study the role of a new ultrathin interface layer of titanium nitride (TiN) conformally deposited on a mesoporous TiO2 (mp-TiO2) scaffold using the atomic layer deposition method. Our characterization results revealed that the presence of TiN at the ETL/perovskite interface improves the charge collection as well as reduces the interface recombination. We find that the morphology (grain size) and optical properties of... 

Perovskite solar cells (PSCs) have excellent photovoltaic properties. There are, however, challenges of materials cost and device stability to be solved before commercializing them. Utilizing low-cost inorganic hole transport materials (HTM) as a replacement for spiro-OMeTAD, and replacing the Au electrode with printable carbon could be important steps in this regard. For this purpose, CuInxGa1-xS2 (x = 1, 0.75, 0.5, 0.25, 0) nanoparticle layers are deposited as inorganic HTMs with carbon composite electrode as the back electrode. Photovoltaic properties of PSCs with CuInxGa1-xS2/Carbon hole collecting electrodes are studied by changing the In ratio in the HTM layer. Results from impedance... 

Hybrid perovskite solar cells (PSCs) have gained significant attention owing to their excellent physicochemical and photovoltaic properties. PSCs typically consist of a perovskite light absorber sandwiched between two carrier selective layers optimized with respect to optimal band alignment and low interfacial recombination. The quality of the perovskite layer and interfaces play major roles in the fabrication of high-performance PSCs. In the present work, we systematically investigate the planar structure PSCs based on TiO2 and TiO2/ZnO electron transport layers (ETLs), which provide deeper insight into the charge recombination and accumulation mechanisms. We show that the double-layer... 

The fabrication of efficient perovskite solar cells (PSCs) using all-vacuum processing is still challenging due to the limitations in the vacuum deposition of the hole transporting layer (HTL). Herein, inverted PSCs using copper (II) phthalocyanine (CuPC) as an ideal alternative HTL for vacuum processing are fabricated. After proper optimization, a PSC with a power conversion efficiency (PCE) of 20.3% is achieved, which is much better than the PCEs (16.8%) of devices with solution-based CuPC. As it takes a long time to dissolve CuPC in the solution-based device, the evaporation approach has better advantage in terms of fast processing. In addition, the device with the evaporated CuPC HTL... 

The morphology of the perovskite layer, the effective extraction of the charge carriers, and their transport are the main factors determining the power conversion efficiency (PCE) of the perovskite solar cells (PSCs). In this work, we demonstrated that the geometric and electronic structures of the PSCs could be modified by using a conductive polymer additive in the lead (Pb) halide layer prepared by a two-step deposition method. Polypyrrole (PPy) as a conductive polymer is used in the perovskite layers which could increase the PCE of CH3NH3PbI3-xClx mixed-halide PSCs. By adding an optimized amount of PPy, PCE has been raised from 10.4 to 13.2%. PPy acts as a conductive channel facilitating... 

Perovskite solar cells have been appearing as a superior photovoltaic device owing to their high photovoltaic performance and low cost of fabrication. The formation of a compact and uniform perovskite layer with large crystal size is a significant factor to get the best device performance. In this work, polyvinylidene difluoride (PVDF) was used as a ferroelectric polymer additive to fabricate high-performance mesoporous CH3NH3PbI3-xClx mixed-halide perovskite solar cells in a sequential deposition method. Power conversion efficiency has been enhanced from 10.4 to 16.51% in an ambient atmosphere in the presence of an optimized amount of PVDF assuring continuous and smooth layers with large... 

Surface modification of SnO2 electron transporting layer (ETL) plays a critical role in the performance of SnO2-based planar perovskite solar cells (PSC). Here, we show how long-time NH4F-based water bath treatment of SnO2 layer makes smoothing and morphological improvements and enhances the device performance. Recently it was shown that short-time NH4F treatment (2 sec) with spin coating method reduces interface traps by improving surface chemistry. Here we observe the smoothing of SnO2 films as a result of long-time NH4F treatment, which could be a result of a slight etching-deposition process. Absorption and resistivity measurements indicate that SnO2 etching process is involved in... 

Perovskite materials with ABX3 structure (A: organic, B: metal, and X: halides) have attracted tremendous attention due to their outstanding optoelectronic properties. Herein, a novel approach is developed using chemical vapor deposition (CVD), i.e., metal alloying of halide-perovskite domain via ion-transfer (MAHDI) for the growth of high-quality perovskite films, grown directly from a metal precursor. This technique easily enables us to replace the toxic Pb metal (B site) with other metals using alloying approach. Using the proposed approach, we fabricated stable and efficient Pb–In perovskite solar cells (PSCs) with a maximum power conversion efficiency (PCE) of 21.2%, which is more...