Sharif Digital Repository

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

Classic identifiability analysis of flow barriers in incompressible single-phase flow reveals that it is not possible to identify the location and permeability of low-permeability barriers from production data (wellbore pressures and rates), and that only averaged reservoir properties in between wells can be identified. We extend the classic analysis by including compressibility effects. We use two approaches: a twin experiment with synthetic production data for use with a time-domain parameter-estimation technique, and a transfer-function formalism in the form of bilaterally coupled four-ports allowing for an analysis in the frequency domain. We investigate the identifiability, from noisy... 

Rock samples from the Asmary outcrop formation of the Ahwaz oil rich zone with a porosity of 16% and permeability of 1 md and MIS crude oil with an API value of 42.5 and moderate asphaltene content of 3%, were used to study the effect of the incubation time and flow rate of the displacing fluid in MEOR operations. Five species of rod shaped, gram positive, thermophile and facultative bacteria were isolated and purified from the crude. Due to the high sweep efficiency prevailing in the core flooding system, the effect of the displacing brine flow rate on the oil recovery efficiency was found not to be significant. On the other hand, a 100% increase in incubation time from 7 to 14 days... 

In this paper, lean blow-out limits in a double swirl GT model combustor were investigated experimentally for liquid petroleum gas fuel. The lean blow-out curve was extracted for different combustor configurations. While burner could operate reasonably under ultra-lean conditions, two different sets of operating conditions, one with a low flow rate and another one with high flow rate, are identified and studied in terms of lean blow-out and pollutant. Results showed that while the flame structure was similar in both cases, the chamber responses to geometrical changes and also preheating are minimal at the low flow rate. That means confinement and injector type have desirable effects on... 

Water flooding is being widely used in the petroleum industry and has been considered as a simple inexpensive secondary recovery method. But in fractured formations, existence of fracture system in reservoir rock induces an adverse effect on oil recovery by water flooding. Polymer flooding has been successfully applied as an alternative enhanced oil recovery method in fractured formations. But, the role of fracture geometrical properties on macroscopic efficiency of polymer flooding is not yet well-understood, especially in fractured five-spot systems. In this work five-spot glass micromodel, because of micro-visibility, ease of multiple experimentations and also presence of the unexplored... 

Abstract: This study investigates the catalytic activity of mixed–metal oxide nanoparticles with different surface acidities on asphaltene adsorption followed by catalytic oxidation–decomposition. Three different types of mixed–metal oxide nanoparticles (CeNiO3, CeCaO3 and CeZrO4) were synthesized, and their size, structure, and acid properties were characterized by field–emission scanning electron microscopy (FE–SEM), energy-dispersive X-ray spectroscopy (EDX), the high–resolution transmission electron microscopy (HR-TEM), X-ray powder diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area measurement and ammonia temperature-programmed desorption (NH3–TPD). Asphaltenes were extracted... 

We introduce the notion of private set operations (PSO) as a symmetric-key primitive in the cloud scenario, where a client securely outsources his dataset to a cloud service provider and later privately issues queries in the form of common set operations. We define a syntax and security notion for PSO and propose a general construction that satisfies it. There are two main ingredients to our PSO scheme: an adjustable join (Adjoin) scheme (MIT-CSAIL-TR-2012-006 (2012) Cryptographic treatment of CryptDB's adjustable join. http://people.csail.mit.edu/nickolai/papers/popa-join-tr.pdf) and a tuple set (TSet) scheme (Cash, D., Jarecki, S., Jutla, C. S., Krawczyk, H., Rosu, M.-C., and Steiner, M.... 

Enhanced oil recovery (EOR) methods are mostly based on different phenomena taking place at the interfaces between fluid–fluid and rock–fluid phases. Over the last decade, carbonated water injection (CWI) has been considered as one of the multi-objective EOR techniques to store CO2 in the hydrocarbon bearing formations as well as improving oil recovery efficiency. During CWI process, as the reservoir pressure declines, the dissolved CO2 in the oil phase evolves and gas nucleation phenomenon would occur. As a result, it can lead to oil saturation restoration and subsequently, oil displacement due to the hysteresis effect. At this condition, CO2 would act as in-situ dissolved gas into the oil... 

A new nanocomposite polymer gel is synthesized for reduction of excess water production in petroleum reservoirs at real operating conditions. This new nanocomposite gel contains SiO2 nanoparticles, partially hydrolyzed polyacrylamide (HPAM) and chromium triacetate. High pressure and high temperature tests using porous carbonate core are carried out to evaluate the effects of nanoparticles on the synthesized polymer gel performance. It is shown that the residual resistance factor ratio of water to oil using the synthesized polymer gel nanocomposite in this work is much higher than that of the ordinary polymer gels. The presented results confirm the high performance of the synthesized... 

This paper uses autoregressive jump intensity (ARJI) model to show that the oil price has both GARCH and conditional jump component. In fact, the distribution of oil prices is not normal, and oil price returns have conditional heteroskedasticity. Here the authors compare constant jump intensity with the dynamic jump intensity and evidences demonstrate that oil price returns have dynamic jump intensity. Therefore, there is strong evidence of time varying jump intensity Generalized Autoregressive Heteroscedasticity (GARCH) behavior in the oil price returns. The findings have several implications: first, it shows that oil price is highly sensitive to news, and it does settle around a trend in... 

The present study was carried out to evaluate the degradation efficiency of benzene, toluene, and xylene (BTX) by isolated bacteria from various petroleum-hydrocarbons contaminated sites. Five isolated bacteria were selected for testing BTX biodegradation from liquid culture media. Each of these bacteria was able to degrade BTX but with different efficiencies. Maximum biodegradation efficiency for benzene (more than 70 %) was obtained by Gram-positive coccobacillus, Gram-positive coccus and Gram-negative bacillus bacteria, for toluene (60 %) and xylene (70 %) by Gram-positive coccobacillus and Gram-negative coccobacillus. It was found that the presence of xylene in the substrate mixture... 

Recently, super gas wet and gas wet surfaces have been extensively attended in petroleum industry, as supported by the increasing number of publications in the last decade related to wettability alteration in gas condensate reservoirs. In many cases, contact angle measurement has been employed to assess the wettability alteration. Even though contact angle measurement seems to be a straightforward approach, there exist many misuses of this technique and consequently misinterpretation of the corresponding results. In this regard, a critical inspection of the most recent updated concepts and the intervening parameters in the contact angle based wettability evaluation of liquid-solid-gas... 

In this paper, a novel method which has been proposed during the last decade for increasing of the permeability of porous media of petroleum reservoirs by transferring of energy via ultrasound waves is investigated numerically. Increasing of permeability of porous media of petroleum reservoirs results in enhancing of oil recovery. This technique is based on the idea of transferring of energy to the liquid filled porous media via the ultrasound waves and consequently producing of pulsating vapor bubbles. The generated vapor bubbles transfer the energy of ultrasound waves in the liquid filled passages of a porous medium through velocity and pressure fields in the liquid domain and in turn... 

In this paper, a computational technique is presented for the isothermal and non-isothermal water injection into naturally fractured oil reservoirs. A remarkable number of naturally fractured reservoirs contain relatively heavy oils that could not be extracted economically; hence, the thermal recovery methods are extensively used for such reservoirs. In this study, the effectiveness of hot water injection over cold (isothermal) water injection in oil production is quantified. The influence of long and short fractures and their alignments on oil recovery are discussed. To this end, a 2D model for two-phase fluid flow and heat transfer is presented. The medium is assumed to be partially... 

In this paper, a computational technique is presented for the isothermal and non-isothermal water injection into naturally fractured oil reservoirs. A remarkable number of naturally fractured reservoirs contain relatively heavy oils that could not be extracted economically; hence, the thermal recovery methods are extensively used for such reservoirs. In this study, the effectiveness of hot water injection over cold (isothermal) water injection in oil production is quantified. The influence of long and short fractures and their alignments on oil recovery are discussed. To this end, a 2D model for two-phase fluid flow and heat transfer is presented. The medium is assumed to be partially... 

The purpose of this study was the production of copolymers and terpolymers with highly hydrophilic–hydrophobic properties, using inexpensive and available monomers as potential enhancing oil recovery (EOR) and water production control agents for high-temperature and high-salinity (HTHS) oil reservoirs. For this purpose, several copolymers and terpolymers with different molar percentage of acrylamide/styrene, acrylamide/maleic anhydride, and acrylamide/styrene/maleic anhydride were synthesized by the inverse emulsion polymerization technique. The presence of hydrophobic styrene and hydrophilic maleic anhydride monomers in the copolymer and terpolymer structure, provided some unique properties... 

Kaolin clay material was loaded with potassium carbonate by impregnation method as a novel, effective, and economically heterogeneous catalyst for biodiesel production of sunflower oil via the transesterification reaction. The structural and chemical properties of the produced catalysts were characterized through several analyses including the X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, and Brunauer–Emmett–Teller specific surface area. These revealed the best catalyst for the investigated reaction among different ones prepared based upon various impregnation extent of the potassium carbonate. The influence of this parameter was examined through a... 

The formation of liquid bridges can maintain capillary continuity between matrix blocks during gas/oil gravity drainage in fractured reservoirs. A travelling oil drop draining into a fracture either forms a liquid bridge or breaks into detached drops. However, the different characteristics of a travelling drop during its elongation and required conditions for transformation into a liquid bridge are not well described in the published literature. In this work, a one-dimensional model based on slender-drop theory is employed that holds gravity, viscosity, and surface tension forces but ignores inertia. This model, together with Young-Laplace equation, gives the fracture capillary pressure.... 

A bacterial strain, FBHYA2, capable of degrading naphthalene, was isolated from the American Petroleum Institute (API) separator of the Tehran Oil Refinery Complex (TORC). Strain FBHYA2 was identified as Achromobacter sp. based on physiological and biochemical characteristics and also phylogenetic similarity of 16S rRNA gene sequence. The optimal growth conditions for strain FBHYA2 were pH 6.0, 30°C and 1.0% NaCl. Strain FBHYA2 can utilize naphthalene as the sole source of carbon and energy and was able to degrade naphthalene aerobically very fast, 48 h for 96% removal at 500 mg/L concentration. The physiological response of Achromobacter sp., FBHYA2 to several hydrophobic chemicals... 

Refineries are amongst the most energy-intensive and polluting industries in the world. Biotechnology may serve as an alternative low-cost and environmental-friendly tool to the current costly, toxic and hazardous refining processes. In this study, the compositional redistribution of a heavy hydrocarbon cut is investigated under biological conversion using native microbial consortia. The native consortia were obtained by batch enrichment method applied on oil-polluted soil samples from oil refineries of Iran. The bioconversion experiments were conducted with 20% and 40% (v/v) of the heavy cut as the sole carbon source and 10% (v/v) of the consortia broth in 250 ml flasks containing a mineral...