Sharif Digital Repository

In this study, a multivariate-based strategy was developed for simultaneous determination of thirteen carcinogenic polycyclic aromatic hydrocarbons (PAHs) in water samples using gold nanoparticles (AuNPs) as solid-phase extraction (SPE) sorbent combined with gas chromatography (GC). The extraction technique is based on the strong affinity between citrate-capped AuNPs and PAHs. Furthermore, characterization of AuNPs was performed by UV-vis spectroscopy and transmission electron microscopy (TEM) techniques. A rotatable central composite design (CCD) combined with multiple linear regression (MLR) was used for designing the extraction procedure and developing models using the GC peak areas of 13... 

The present study demonstrates HEMA-grafted nanodiamond (ND-HEMA)/acrylate-terminated polyurethane-acrylate diluents (APUA) composites as promising materials for bone implant applications. Neat APUA and APUA composites containing ND-HEMA at different loadings up to 2 wt% were prepared by an in situ polymerization method. Morphological analysis demonstrated that ND-HEMAs were actually in the form of tightly bound aggregates which led to formation of big agglomerates at a concentration of 2 wt%. It was also suggested that ND-HEMAs were preferentially localized in the continuous soft domain of APUA; however it interacted by both soft and hard domains. Moreover, ND-HEMAs caused considerable... 

In this study, maleic anhydride grafted polypropylene microporous flat-sheet membranes were prepared via a thermally induced phase separation method with a mixture of dibutyl phthalate and dioctyl phthalate as a diluent. The effects of the polymer composition and coagulation bath temperature on the morphology and performance of the fabricated membranes were investigated. The hydrophilicity results of the membranes demonstrated that membrane modification reduced the water contact angle by about 45°, whereas the pure water flux was enhanced about four times. The antifouling behavior of the fabricated membranes was also investigated in a membrane bioreactor. The results show that the pure water... 

A magnetic nanocomposite consisting of nanoparticles–polybutylene terephthalate (MNPs–PBT) was electrospun and used as an extracting medium for an on-line μ-solid phase extraction (μ–SPE)–high performance liquid chromatography (HPLC) set–up with an ultraviolet (UV) detection system. Due to the magnetic property of the prepared nanofibers, the whole extraction procedure was implemented under an external magnetic field to enhance the extraction efficiencies. The developed method along with the synthesized nanocomposite were found to be appropriate for the determination of trace levels of selected drugs including furosemide, naproxen, diclofenac and clobetasol propionate in the urine sample.... 

Thermal cracking is the prevalent type of distress experienced by asphalt pavements in cold regions. It is widely assumed that when thermal stresses induced in the pavement exceed the tensile strength of the asphalt surface layer, cracking occurs; however, the role of thermal fatigue should not be ignored. To better describe the low-temperature (LT) performance properties of modified asphalt binders, a new parameter, normalised tensile stress (NTS), was defined in this research. NTS values were compared with bending beam rheometer (BBR), direct tension (DT) and semi-circular bending (SCB) fracture test results. The m-value parameter of the BBR test specifies the type of asphalt binder. This... 

A dispersive micro-solid-phase extraction (D-μ-SPE) procedure coupled with surfactant-enhanced spectrofluorimetric detection was developed for determination of ofloxacin and lomefloxacin from biological and environmental samples. The D-μ-SPE procedure was performed using magnetic Fe3O4 nanoparticle grafted multi-walled carbon nanotube as an efficient adsorbent. The main factors affecting the signal enhancement (including surfactant concentration and pH) and extraction efficiency (including pH, extraction time, sample volume, amount of magnetic adsorbent, and desorption conditions) were investigated in detail. Under the optimized conditions, the calibration curves were linear (R2 0.9995) over... 

Solvent extraction of rare earths from nitrate leach liquor of apatite using mixtures of tributyl phosphate (TBP) and di-(2-ethylhexyl) phosphoric acid (D2EHPA) was studied. The effects of nitrate and hydrogen ion concentration of the aqueous phase as well as the composition and concentration of extractants in the organic phase on the extraction behavior of lanthanum, cerium, neodymium, and yttrium were investigated. The distribution ratio of REEs increases by increasing the nitrate concentration in aqueous phase and concentration of extractants in organic phase, but the hydrogen ion concentration in aqueous phase has a decreasing effect. Yttrium as a heavy rare earth is more sensitive to... 

Thermal cracking is the prevalent type of distress experienced by asphalt pavements in cold regions. It is widely assumed that when thermal stresses induced in the pavement exceed the tensile strength of the asphalt surface layer, cracking occurs; however, the role of thermal fatigue should not be ignored. To better describe the low-temperature (LT) performance properties of modified asphalt binders, a new parameter, normalised tensile stress (NTS), was defined in this research. NTS values were compared with bending beam rheometer (BBR), direct tension (DT) and semi-circular bending (SCB) fracture test results. The m-value parameter of the BBR test specifies the type of asphalt binder. This... 

Natural silk fibroin (SF) polymer has biomedical and mechanical properties as a biomaterial for bone tissue engineering scaffolds. Freeze-dried porous nanocomposite scaffolds were prepared from silk fibroin and titanium dioxide (TiO2) nanoparticles as a bioactive reinforcing agent by a phase separation method. In order to fabricate SF/TiO2 scaffolds, 5, 10, 15 and 20 wt% of the TiO2 were added to the SF. The phase structure, functional groups and morphology of the scaffolds were evaluated using X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy techniques, respectively. Porosity of the scaffolds was measured by Archimedes' Principle. In addition,... 

In this research, an attempt was made toward synthesizing a sol–gel–based silica aerogel and its subsequent coating on a copper wire by phase separation of polystyrene. Adaption of this new approach enabled us to coat the metallic wire with powder materials. The use of this method for coating, led to the formation of a porous and thick structure of silica aerogel. The coated wire was placed in a needle and used as the sorbent for in–tube solid phase microextraction of chlorobenzenes (CBs). The superhydrophobicity of sorbent on extraction efficiency was investigated by using different ratios of tetraethylorthosilicate/methyltrimethoxysilane. The surface coated with the prepared silica aerogel... 

Thermoplastic polyurethane nanocomposites incorporating carbon nanotubes and graphene nanoplatelets were prepared through melt blending and compression molding, and the compounding process was optimized taking into account the different physical properties of one-dimensional carbon nanotubes and two-dimensional graphene nanoplatelets. Filler dispersion was further improved in the case of carbon nanotubes by noncovalent surface modification using a specific surfactant. The well-dispersed nanofillers favored enhanced phase separation in the thermoplastic polyurethane, leading to a better microstructure, which is able to improve the load transfer and maximize the tensile and viscoelastic... 

Biodegradable acrylate-terminated polyurethane/acrylate (APUA) filled with 2-hydroxyethyl methacrylate functionalized carbon nanotube (CNT-HEMA) was prepared by in situ free radical crosslinking. CNT-HEMA enhanced crystallinity of soft domain and caused more phase separation between hard and soft domains of APUA. Tensile testing showed a considerable improvement in elastic modulus (∼160%) and tensile strength (∼30%) at 1 wt% loading. Morphological features of APUA induced by nanotubes were found to be dominant on mechanical properties of APUA/CNT-HEMA. CNT-HEMA increased water contact angle of APUA; however, wettability of APUA/CNT-HEMA maintained in acceptable range for biomedical... 

In this study, cellulose acetate (CA) fibers were prepared using different solvent systems in electrospinning. The recorded scanning electron microscopy micrographs indicated that the morphology of the prepared fibers is closely associated with the type of electrospinning solvents. The prepared CA fibers were used as an extractive phase for on–line micro–solid phase extraction (μ-SPE) of nonsteroidal–inflammatory drugs (NSAIDs) in biological samples pursued by HPLC–UV determination. Work conducted on this research ascertained that the use of dichloromethane:acetone (3:1, v/v) solvent system in the CA dissolution for electrospinning, leads to the formation of porous ribbon–like fibers and... 

Graphene nanoplatelets with different surface functional groups and polarity were prepared by Hummer's method and electrochemical exfoliation of graphite in two aqueous acids. The XRD, FTIR and sedimentation tests performed to characterize the polarity of the prepared graphenes. The highest polarity was associated with the sample prepared by Hummer's method and the sample synthesized by electrochemical exfoliation in nitric acid medium showed the moderate polarity. Meanwhile, the sample prepared in sulfuric acid medium showed the lowest polarity. Then thermoplastic polyurethane (TPU)/graphene nanocomposite films were fabricated with solvent exchange method. While the dispersion state and... 

The current investigation was to present composite membranes with strong interfacial adhesion between top polymeric selective layer and the bottom micro-porous support layer with appropriate gas permeation behavior and practically suitable processing characteristics. To this end, a series of acrylate-terminated polyurethanes (APUs) based on poly (ethylene glycol) (PEG) with different molecular weights (Mn) of 600, 1000, 1500, 2000 and 4000 g/mol, toluene diisocyanate (TDI), and 2-hydroxyethyl methacrylate (HEMA) were synthesized. Composite membranes were prepared with UV-curable acrylate-terminated polyurethane/acrylate diluent (APUAs) as selective layer and polyester/polysulfone (PS/PSF) as... 

It is known that Fluoride ions strongly affect bone mineralization and formation. In the present study, the engineered bone tissue scaffolds are fabricated using silk fibroin (SF) and flouridated TiO2 nanoparticles. TiO2 nanoparticles are modified by fluoride ions, and different levels (0, 5, 10, 15 and 20 wt%) of the fluoridated TiO2 nanoparticles (TiO2-F) were subsequently added to the SF matrix through phase separation method to prepare silk fibroin/flouridated TiO2 nanocomposite scaffolds (SF/TiO2-F). Phase structure, functional groups, morphology and mechanical properties of the obtained scaffolds were evaluated by X-ray diffraction method (XRD), Fourier transform infrared spectroscopy... 

For thousands of years, plants and their products have been used as the mainstay of medicinal therapy. In recent years, besides attempts to isolate the active ingredients of medicinal plants, other new applications of plant products, such as their use to prepare drug delivery vehicles, have been discovered. Nanobiotechnology is a branch of pharmacology that can provide new approaches for drug delivery by the preparation of biocompatible carrier nanoparticles (NPs). In this article, we review recent studies with four important plant proteins that have been used as carriers for targeted delivery of drugs and genes. Zein is a water-insoluble protein from maize; Gliadin is a 70% alcohol-soluble... 

Biodegradable acrylate-terminated polyurethane/acrylate (APUA) filled with 2-hydroxyethyl methacrylate functionalized carbon nanotube (CNT-HEMA) was prepared by in situ free radical crosslinking. CNT-HEMA enhanced crystallinity of soft domain and caused more phase separation between hard and soft domains of APUA. Tensile testing showed a considerable improvement in elastic modulus (∼160%) and tensile strength (∼30%) at 1 wt% loading. Morphological features of APUA induced by nanotubes were found to be dominant on mechanical properties of APUA/CNT-HEMA. CNT-HEMA increased water contact angle of APUA; however, wettability of APUA/CNT-HEMA maintained in acceptable range for biomedical...