Sharif Digital Repository

Graphene nanoplatelets with different surface functional groups and polarity were prepared by Hummer's method and electrochemical exfoliation of graphite in two aqueous acids. The XRD, FTIR and sedimentation tests performed to characterize the polarity of the prepared graphenes. The highest polarity was associated with the sample prepared by Hummer's method and the sample synthesized by electrochemical exfoliation in nitric acid medium showed the moderate polarity. Meanwhile, the sample prepared in sulfuric acid medium showed the lowest polarity. Then thermoplastic polyurethane (TPU)/graphene nanocomposite films were fabricated with solvent exchange method. While the dispersion state and... 

We study the competition between spin and charge fluctuations of the extended Hubbard model with on-site and dipole-dipole interactions in a one-dimensional lattice. Using the extended two-particle self consistent (ETPSC) method, we find the corresponding expressions for spin and charge response functions. In this approach, the irreducible spin and charge vertices are a function of inter-particle distance (r) and wave-number (q). This theory allows us to determine the crossover temperatures and the dominant instability as a function of U and V. The phase diagrams are obtained for several effective particle densities: n = 0.5, n = 1 and n = 4/3. Each phase diagram (U − V − T space)... 

In the present experimental study, the effect of operating parameters such as inlet and outlet pressure as well as inlet temperature on the mass separation capability of vortex tubes (VTs) for a gas mixture is investigated. Specifically, concentrating heavier components of a gas mixture in the hot outlet stream is considered. Proposing a semi-empirical index from the experimental study, the simulation of different arrangements of VTs, and the effect of recycling a portion of the hot outlet stream on its mass separation performance are investigated. Moreover, the proposed separation method by VTs is economically compared with commonly used methods by distillation columns and two-phase... 

The potential utilization of encapsulation techniques in food, pharmaceutical and agricultural products preparation, presents a new alternative for complementary technologies such as targeting delivery vehicles and carriers for active food ingredients. Encapsulation could be accomplished by different techniques like: simple or complex coacervation, emulsification technique, phase separation, spray drying, spray chilling or spray cooling, extrusion coating, freeze drying, fluidized-bed coating, liposomal entrapment, centrifugal suspension separation, co-crystallization and molecular inclusion complexation. Encapsulation is a method by which one bioactive material or mixture of materials is... 

In this study, we numerically determined the performance of a microscale separator comprising a lateral and a main channel to separate a two-phase flow. It was aimed to conduct continuous phase through the lateral channel and dispersed phase through the main channel. The continuous and dispersed phases were modeled as incompressible Newtonian fluids with the corresponding interface tracked by the phase-field model. The dynamics, including pressure fluctuations in the separator, were further examined. It was mechanistically demonstrated how the geometry of the separator modulates the phase separation. Further examined were the influences of various geometrical parameters on the performance of... 

The gas separation properties of ethylene vinyl acetate (EVA) membranes containing 18 and 28 wt% of vinyl acetate (VA) were investigated in this study. The effects of membrane preparation conditions, such as thermal and thermal/wet phase inversion, and the type of solvent on the gas separation properties of EVA membranes were investigated. The permeation of pure O2, N2, CH4, and CO2 gases at different feed pressures ranging from 2 to 11 bar were examined. The results indicated that the CO2 permeability was evidently higher than those of the other gases. Furthermore, the solubility mechanism was found to be the dominant mechanism for permeation of gases through EVA membranes. Moreover, the... 

In this work, gas dehydration and natural gas liquid (NGL) recovery by the Joule-Thomson (JT) process, were investigated using the computational fluid dynamics (CFD) modeling approach. Droplet behavior inside the separator was analyzed by particle tracing and moisture diffusion methods. The modified separator reduced the water content of natural gas from 0.008 to 0.0029 kg/m3. In addition, the separation efficiency was increased by addition of internal components. One of the added internal components was an inlet deflector. Among different inlet deflectors, the reversed type one exhibited the highest separation efficiency. The separation efficiency improved from 6 to 10% in the original... 

Phase separation is one of the common methods for fabrication of polymeric membrane, which classifies into the categories of Thermally Induced Phase Separation (TIPS) and Nonsolvent Induced Phase Separation (NIPS), i.e. heat and mass transfer induced phase separation, respectively. NIPS has been applied more commonly than TIPS, but the membranes which have resulted from this technique have macro finger-like voids, weak mechanical strength and not high separation ability in comparison with the TIPS. In contrast, membranes produced by the TIPS method have micro scale pores, high mechanical strength and also high separation capability, however, polymeric solutions prepared at high temperatures... 

In this study, TiO 2-SiO 2 nanocomposite films with different amounts of SiO 2 were prepared by sol-gel process and were coated onto stainless steel 316L. The effect of addition of various amount of SiO 2 in the precursor solution on the photocatalysis, photo-generated hydrophilicity and self-cleaning property of TiO 2 thin films was investigated by X-ray diffraction, Fourier transform infrared spectroscopy, water contact angle measurements and UV spectroscopy. In the tested ranges of SiO 2 content and sintering temperature, the highest photocatalytic activity and self-cleaning property were observed in the 15 mol% SiO 2 sample sintered at 750 °C. Addition of less than 30 mol% SiO 2 had a... 

A high-order compact finite-difference lattice Boltzmann method (CFDLBM) is extended and applied to accurately simulate two-phase liquid-vapor flows with high density ratios. Herein, the He-Shan-Doolen-type lattice Boltzmann multiphase model is used and the spatial derivatives in the resulting equations are discretized by using the fourth-order compact finite-difference scheme and the temporal term is discretized with the fourth-order Runge-Kutta scheme to provide an accurate and efficient two-phase flow solver. A high-order spectral-type low-pass compact nonlinear filter is used to regularize the numerical solution and remove spurious waves generated by flow nonlinearities in smooth regions... 

We report the rheological properties of ferro-fluid (FF) containing iron oxide nano-particles. At first, a FF was synthesized by using chemical co-precipitaton[1]. The microstructure study using SEM revealed that the FF contained nano-particles with the mean particle size of 35nm. The XRD study revealed that we have well crystallized structures of magnetite; they appeared to be approximately single crystalline structures. The rheological results proved that the FF has non Newtonian behavior, it is a shear thinning fluid in all magnetic fields, Moreover, the magnetic field increases the viscosity in a definite shear rate due to the nano-particles agglomerations and formation of chain-like... 

In this study, a fast and sensitive flow injection μ-solid phase extraction (FI-μ-SPE) technique based on an electrospun polyaniline (PANI) nanocomposite in conjunction with gas chromatography-mass spectrometry (GC-MS) was developed. The PANI-based nanocomposite was synthesized by electrospinning of a solution containing polyvinyl alcohol (PVA)/PANI. The majority of PVA template was subsequently removed from the whole PVA/PANI nanofibers blend by exposing the electrospun nanocomposite to hot water. The homogeneity, porosity and characterization of the electrospun nanofibers were investigated by the scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. Due to... 

A high-throughput micro-solid-phase extraction device based on a 96-well plate was constructed and applied to the determination of pesticide residues in various apple samples. Butyl methacrylate and ethylene glycol dimethacrylate were copolymerized as a monolithic polymer and placed in the cylindrically shaped stainless-steel meshes of 96-micro-solid-phase extraction device and used as an extracting unit. Before the micro-solid-phase extraction, microwave-assisted extraction was employed to facilitate the transfer of the pesticide residues from the apple matrix to liquid media. Then, 1 mL of the aquatic samples was transferred into the 96-well plate and the 96-micro-solid-phase extraction... 

A magnetic nanocomposite consisting of nanoparticles–polybutylene terephthalate (MNPs–PBT) was electrospun and used as an extracting medium for an on-line μ-solid phase extraction (μ–SPE)–high performance liquid chromatography (HPLC) set–up with an ultraviolet (UV) detection system. Due to the magnetic property of the prepared nanofibers, the whole extraction procedure was implemented under an external magnetic field to enhance the extraction efficiencies. The developed method along with the synthesized nanocomposite were found to be appropriate for the determination of trace levels of selected drugs including furosemide, naproxen, diclofenac and clobetasol propionate in the urine sample.... 

Thermal cracking is the prevalent type of distress experienced by asphalt pavements in cold regions. It is widely assumed that when thermal stresses induced in the pavement exceed the tensile strength of the asphalt surface layer, cracking occurs; however, the role of thermal fatigue should not be ignored. To better describe the low-temperature (LT) performance properties of modified asphalt binders, a new parameter, normalised tensile stress (NTS), was defined in this research. NTS values were compared with bending beam rheometer (BBR), direct tension (DT) and semi-circular bending (SCB) fracture test results. The m-value parameter of the BBR test specifies the type of asphalt binder. This... 

Solvent extraction of rare earths from nitrate leach liquor of apatite using mixtures of tributyl phosphate (TBP) and di-(2-ethylhexyl) phosphoric acid (D2EHPA) was studied. The effects of nitrate and hydrogen ion concentration of the aqueous phase as well as the composition and concentration of extractants in the organic phase on the extraction behavior of lanthanum, cerium, neodymium, and yttrium were investigated. The distribution ratio of REEs increases by increasing the nitrate concentration in aqueous phase and concentration of extractants in organic phase, but the hydrogen ion concentration in aqueous phase has a decreasing effect. Yttrium as a heavy rare earth is more sensitive to... 

Thermal cracking is the prevalent type of distress experienced by asphalt pavements in cold regions. It is widely assumed that when thermal stresses induced in the pavement exceed the tensile strength of the asphalt surface layer, cracking occurs; however, the role of thermal fatigue should not be ignored. To better describe the low-temperature (LT) performance properties of modified asphalt binders, a new parameter, normalised tensile stress (NTS), was defined in this research. NTS values were compared with bending beam rheometer (BBR), direct tension (DT) and semi-circular bending (SCB) fracture test results. The m-value parameter of the BBR test specifies the type of asphalt binder. This... 

Thermoplastic polyurethane nanocomposites incorporating carbon nanotubes and graphene nanoplatelets were prepared through melt blending and compression molding, and the compounding process was optimized taking into account the different physical properties of one-dimensional carbon nanotubes and two-dimensional graphene nanoplatelets. Filler dispersion was further improved in the case of carbon nanotubes by noncovalent surface modification using a specific surfactant. The well-dispersed nanofillers favored enhanced phase separation in the thermoplastic polyurethane, leading to a better microstructure, which is able to improve the load transfer and maximize the tensile and viscoelastic... 

Biodegradable acrylate-terminated polyurethane/acrylate (APUA) filled with 2-hydroxyethyl methacrylate functionalized carbon nanotube (CNT-HEMA) was prepared by in situ free radical crosslinking. CNT-HEMA enhanced crystallinity of soft domain and caused more phase separation between hard and soft domains of APUA. Tensile testing showed a considerable improvement in elastic modulus (∼160%) and tensile strength (∼30%) at 1 wt% loading. Morphological features of APUA induced by nanotubes were found to be dominant on mechanical properties of APUA/CNT-HEMA. CNT-HEMA increased water contact angle of APUA; however, wettability of APUA/CNT-HEMA maintained in acceptable range for biomedical... 

The current investigation was to present composite membranes with strong interfacial adhesion between top polymeric selective layer and the bottom micro-porous support layer with appropriate gas permeation behavior and practically suitable processing characteristics. To this end, a series of acrylate-terminated polyurethanes (APUs) based on poly (ethylene glycol) (PEG) with different molecular weights (Mn) of 600, 1000, 1500, 2000 and 4000 g/mol, toluene diisocyanate (TDI), and 2-hydroxyethyl methacrylate (HEMA) were synthesized. Composite membranes were prepared with UV-curable acrylate-terminated polyurethane/acrylate diluent (APUAs) as selective layer and polyester/polysulfone (PS/PSF) as...