Sharif Digital Repository

In this study, conductive sodium alginate/polyaniline/graphene (PAG) NGCs were fabricated utilizing a straightforward solution extrusion method. The 4 point-probe test revealed that the addition of PAG has increased the conductivity of the NGCs up to 9.7 × 10−3 S.cm−1. The results also showed a remarkable increase in the Young modulus and SEM images revealed that the suggested process could produce NGCs continuously and uniformly with desirable porosity. The Fourier-transform infrared spectroscopy spectrum proved a good interaction between PAG and the polymeric matrix. Furthermore, the addition of PAG slightly prevented biodegradation of the NGCs. Finally, the cell viability assay confirmed... 

In this study, ternary MWCNTs/CoFe2O4/FeCo nanocomposite coated with conductive PEDOT-polyaniline (PA@MW/F/C) co-polymers were synthesized by microwave-assisted sol-gel followed in-situ polymerization methods. The phases, crystal structures, morphologies, magnetic and electromagnetic features of the as-prepared samples were identified via XRD, SEM, XPS, VSM, and VNA respectively. Absorption characteristics were investigated in the frequency (12–18 GHz) Ku band. XRD, VSM and SEM analysis confirmed the partial reduction process of CoFe2O4 and successfully decorated magneto-dielectric particles with co-polymers. By measuring electromagnetic features of the samples, it was found that coating... 

In this research, polyaniline@Ba0.5Sr0.5Fe12O19@MWCNTs nanocomposite was prepared via co-precipitation and in-situ polymerization methods, respectively. Microstructural, magnetic and electromagnetic wave absorption analysis of the prepared nanocomposite were studied via XRD, FESEM, VSM and VNA. Compared with Ba0.5Sr0.5Fe12O19@MWCNTs, the microwave absorption bandwidth of the coated nanocompoite with polyaniline was significantly enhanced, which increased to approxiamately 4 GHz from 3 GHz. The effective microwave absorption performance of the Ba0.5Sr0.5Fe12O19@MWCNTs nanocomposite was attributed to increase in the interfacial polarization, improvement in impedance matching as well as porous... 

The synthesis of nanocomposites via in situ grafting polymerization due to its ability to produce polymeric materials with promising microscopic and macroscopic characteristics is becoming very attractive. In this paper, different poly(L-Lactide)-block-poly(ε-caprolactone) (PLLA-b-PCL) copolymers were in situ synthesized in the presence of modified titanium dioxide (TiO2) nanoparticles (mTNP) as the initiator and stannous octoate as the catalyst. The surface of TiO2 was modified by grafting aminopropyl trimethoxy silane to improve initiator efficiency. Copolymers with 90/10, 70/30, and 50/50 mass ratio of L-lactide/ ε-caprolactone and 5 wt% of mTNP (proportional to ε-caprolactone) were... 

In this study, water-soluble terpolymers containing highly hydrophilic monomers of acrylamide and maleic anhydride and highly hydrophobic monomers of styrene were synthesized (ASM) through the one-step inverse emulsion polymerization. Proton nuclear magnetic resonance (1H NMR), fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction pattern (XRD) were performed to investigate the chemical structures and structural transformations of ASM. Thermal stability and thermal decomposition steps of ASM were studied by thermogravimetric analysis (TGA). An Ubbelhode capillary viscometer and a rheological mechanical spectrometer (RMS) were employed to obtain the specific, relative, and... 

In this work, slag based aluminosilicate geopolymer was reinforced with polymeric fibers including, polyester (PES) (waste tire cap plies), polymeric particles including polyethylene terephthalate (PET) (waste water bottle), styrene-butadiene rubber (SBR) (waste tire), and polyvinyl chloride (PVC) (waste water hose). The tensile and compressive strength of the material was evaluated. Taguchi method was employed to assess the influence of the effective parameters on the mechanical characteristics of the geopolymer composite. QUALITEK-4 software was used to create the L32 orthogonal array with 192 (96+96) geopolymer specimens and 32+32 experiments. Analysis of variance (ANOVA) was utilized to... 

Herein, poly (acrylic acid) (PAA) microgels were synthesized via alcohol type cross-linked by a free radical precipitation polymerization approach. At the first time, 1,6-hexanediol (1–6 diol), trimethylolpropane (TMP), and pentaerythritol (PEN) were selected as multifunctional cross- linking agent to synthesize cross-linked poly(acrylic acid) microgels. Alcohol type cross-linking agents can connect the PAA chains. The cross-linking reaction takes place due to reaction between hydroxyl groups of various cross-linkers and carboxyl groups of PAA chains. All of the hydroxyl groups do not participate in the reaction with acid groups of polymer chains through the polymerization stage; therefore,... 

A novel amperometric non-enzymatic glucose sensor is designed by the facile preparation method. It is made by electrodeposition of Cu clusters and converting them to Cu(OH)2 nanotubes (Cu(OH)2NTs) arrays along with thin-film electro-polymerized of spindle-shaped polypyrrole (PPy@Cu(OH)2NTs), which have been doped by using sodium Benzene-1,3-disulfonate as an anion dopant. Various electrochemical methods investigate the electrochemical performance of the modified electrode toward glucose detection. Under the optimized conditions, a significant electrochemical response improvement is observed toward the electro-oxidation of glucose on the PPy@Cu(OH)2NTs electrode's surface relative to the... 

Abstract: In the present paper, an efficient Cu-catalyzed regioselective acylation of indoles with phenylglyoxals was developed which is the first example of indolyl diketones synthesis by a heterogeneous catalyst. The magnetic polyacrylonitrile was synthesized through anchoring acrylonitrile monomers on Fe3O4 nanoparticles surface and then modified with 2-aminopyridine. At the final step, copper nanoparticles were immobilized onto the polymeric support containing stable ligands from functionalized nitrile groups of polyacrylonitrile. The different techniques such as Fourier transmission infrared spectroscopy, X-ray diffraction, Field emission scanning electron microscopy, Transmission... 

In the context of peripheral nerve injuries treatment, self-electrical stimuli nerve guidance conduit is a promising technique. To fabricate such structures, PVDF-chitosan–gelatin was considered for the outside walls of conduit and gellan gum containing conductive polyaniline-graphene (PAG) nanocomposite particles in the middle. PVDF-chitosan–gelatin nanofibers were prepared using the dual-electrospinning method and highly conductive binary-doped polyaniline-graphene was synthesized by chemical oxidative polymerization in the presence of aniline and sodium dodecyl sulfate. The morphology and chemical structure of nanofibers and PAG were characterized using SEM and FTIR analyses. The... 

Conductive self -electrical stimuli bioactive scaffolds could be used the potential for peripheral nerve regeneration with the maximum efficiency. To produce such conductive self-electrical stimuli bioactive scaffolds, chopped spun piezoelectric nanofibers of polyvinylidene fluoride/mesoporous silica nanoparticle (PVDF/MCM41) are prepared and incorporated in gellan/polyaniline/graphene (gellan/PAG) nanocomposites which have been previously prepared by incorporation of polyaniline/graphene (PAG) nanoparticles in gellan gel at 80 °C. Highly conductive binary doped polyaniline/graphene nanoparticles are prepared by chemical oxidative polymerization of aniline monomer using in-suite... 

Graphene nanoplatelets (GNPs) are ideal reinforcements for improving the mechanical properties of aluminum-based matrices due to their outstanding properties. However, it essentially depends on their uniform dispersion in the matrix. In this study, the challenge of uniform dispersion of graphene was performed by functionalizing the non-covalent surface and sonication of GNPs applying non-ionic polymeric ethyl cellulose (EC) surfactant, in which a colloidal mixture was provided with Al powder and graphene, followed by sintering at 620 °C and consolidation. The density and mechanical properties of nanocomposite specimens were investigated and compared with a non-surfactant-assisted Al/GNP... 

Water flooding is one of the most common enhanced oil recovery (EOR) methods, however its application in naturally fractured reservoirs (NFR), suffers from the flow of water in high permeable channels and fractures which leads to low areal and volumetric sweep efficiency. Preformed Particle Gels (PPG), as a subset of gel treatments, can play a vital role in plugging super-permeable zones either near wellbore or deep in the reservoir. Nevertheless the mechanical strength and thermal stability of the designed PPGs, especially under harsh environmental conditions, are subject to further research and development. In spite of recent studies, the effects of nano-materials on the rheological and... 

Currently, Alzheimer's disease (AD) accounts for more than half of all dementia cases. Although genetics, age, and environmental factors affect the disease, the cause of AD is not yet fully known. Various drugs have been proposed for the prevention and treatment of AD, but the delivery of these therapeutic agents to the brain is difficult. The blood–brain barrier prevents systemic drugs from accessing the central nervous system and designing a suitable system to overcome this barrier has attracted much attention. The intranasal pathway, given its proximity to the brain, provides a great opportunity for drug delivery. Understanding the physiological characteristics of the nose can be useful... 

Multistimuli-responsive hyperbranched polymers were synthesized in one-step polymerization using reversible addition-fragmentation chain transfer self-condensing vinyl polymerization (RAFT-SCVP). These hyperbranched polymers responded to UV-vis or sunlight, pH changes, and temperature changes. 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid known as DDMAT participated in esterification with 2-hydroxyethyl methacrylate to obtain a chain transfer monomer in the name of 2-((2-(((dodecylthio)carbonothioyl)thio)-2-methylpropanoyl)oxy)ethylmethacrylate (MACDT). For the first time, smart hyperbranched polymers were produced with the RAFT-SCVP method in one step by using... 

Over the past few years, development of wearable devices has gained increasing momentum. Notably, the demand for stretchable strain sensors has significantly increased due to many potential and emerging applications such as human motion monitoring, prosthetics, robotic systems, and touch panels. Recently, hydrogels have been developed to overcome the drawbacks of the elastomer-based wearable strain sensors, caused by insufficient biocompatibility, brittle mechanical properties, complicated fabrication process, as the hydrogels can provide a combination of various exciting properties such as intrinsic electrical conductivity, suitable mechanical properties, and biocompatibility. There are... 

For bone tissue engineering, stem cell‐based therapy has become a promising option. Re-cently, cell transplantation supported by polymeric carriers has been increasingly evaluated. Herein, we encapsulated human olfactory ectomesenchymal stem cells (OE‐MSC) in the collagen hydrogel system, and their osteogenic potential was assessed in vitro and in vivo conditions. Col-lagen type I was composed of four different concentrations of (4 mg/mL, 5 mg/mL, 6 mg/mL, 7 mg/mL). SDS‐Page, FTIR, rheologic test, resazurin assay, live/dead assay, and SEM were used to characterize collagen hydrogels. OE‐MSCs encapsulated in the optimum concentration of collagen hydrogel and transplanted in rat calvarial... 

In this work, flexible thermoelectric fabrics, polyester/yarn fabrics coated with polyaniline/carbon nanotube (PANI/CNT) nanocomposite, were fabricated by sequential processing: (I) polyaniline/carbon nanotube nanocomposites preparation by a one-step in-situ polymerization and (II) dip coating of a mixture solution of CNT-doped PANI on a polyester/yarn fabric. Nanocomposites were synthesized with various CNT content (0.5, 2.5, 5, and 10 wt%) and characterized using different methods. The Seebeck coefficient and electrical conductivity measurements were used to determine their thermoelectric properties. The results revealed significant improvement in both electrical conductivity and the... 

This review covers the development of bioresorbable polymeric composites for applications in tissue engineering. Various commercially available bioresobable polymers are described, with emphasis on recent bioresorbable composites based on natural and synthetic polymers. Bioresorbable polymers contain hydrolyzable bonds, which are subjected to chemical degradation via either reactive hydrolysis or enzyme-catalyzed active hydrolysis. For synthetic polymers, chemical hydrolysis is the most important mode of degradation. The degradation rate can be controlled by varying the molecular weight and crystallinity. Examples of bioresorbable polymers are: polyurethane, poly(D,L)lactide,... 

BACKGROUND: Hybrid distillation–membrane setups have attracted attention in recent years due to their lower energy usage for ethanol purification. Membrane separation processes operate without heating that reduces energy demand. However, it is somewhat challenging to select the optimal material and process for a membrane purifying ethanol, especially to get an ethanol purity of 99.99% with maximum recovery. RESULTS: In this study, three different configurations of hybrid distillation–membrane setups are proposed consisting of distillation–pervaporation/vapor permeation processes by considering ceramic, polymeric and composite membranes. The design of hybrid processes is performed by coupling...