Sharif Digital Repository

This paper discusses various aspects of unified power flow controller (UPFC) control modes and settings and evaluates their impacts on the power system reliability. UPFC is the most versatile flexible ac transmission system device ever applied to improve the power system operation and delivery. It can control various power system parameters, such as bus voltages and line flows. The impact of UPFC control modes and settings on the power system reliability has not been addressed sufficiently yet. A power injection model is used to represent UPFC and a comprehensive method is proposed to select the optimal UPFC control mode and settings. The proposed method applies the results of a contingency... 

Boost converter operating in critical conduction mode is widely used in low-power power factor corrector because of its simplicity and low switching losses. The switching loss due to parasitic capacitor discharge at the on-time instant can also be reduced by a valley switching technique. In this paper, we introduce a new driver topology for the high-side switch in a synchronous boost converter operating in the critical conduction mode to obtain full zero-voltage switching. Using the proposed high-side driver topology, the conventional control circuit is sufficient to control the low-side switch, and no additional control circuit is required to adjust the timing of the switches. Finally, the... 

The deployment of flexible ac transmission system (FACTS) devices, despite miscellaneous benefits and applications, has been restricted mainly due to their large investment costs. Accordingly, the notion of distributed FACTS (D-FACTS) was recently proposed. Distributed static series compensators (DSSCs), as a new member of D-FACTS, are directly clamped to conductors of transmission lines. The possibility of controlling the compensation rate of DSSCs from the control center affords the active control of network power flow. This paper presents a comprehensive reliability model for the DSSC. The model is then reduced and a state-space representation is extracted for a transmission line with a... 

This paper discusses various aspects of unified power flow controller (UPFC) control modes and settings and evaluates their impacts on the power system reliability. UPFC is the most versatile flexible ac transmission system device ever applied to improve the power system operation and delivery. It can control various power system parameters, such as bus voltages and line flows. The impact of UPFC control modes and settings on the power system reliability has not been addressed sufficiently yet. A power injection model is used to represent UPFC and a comprehensive method is proposed to select the optimal UPFC control mode and settings. The proposed method applies the results of a contingency... 

This paper analytically investigates the effects of system and controller parameters and operating conditions on the dynamic and transient behavior of wind turbines (WTs) with doubly-fed induction generators (DFIGs) under voltage dips and wind speed fluctuations. Also, it deals with the design considerations regarding rotor and speed controllers. The poorly damped electrical and mechanical modes of the system are identified, and the effects of system parameters, and speed/rotor controllers on these modes are investigated by modal and sensitivity analyses. The results of theoretical studies are verified by time domain simulations. It is found that the dynamic behavior of the DFIG-based WT... 

Battery chargers are fundamental components for successful deployment of plug-in hybrid electric vehicles (PHEVs) into future smart grid. Recently, an integrated isolated bidirectional battery charger has been proposed for PHEV applications. The proposed charger eliminates the conventional bulky dc-link capacitor by feeding a dual-bridge resonant tank directly from the three-phase grid. The disadvantages associated with the presented charger are the high number of semiconductor switches which contribute to high cost and switching losses of converter as well as complicated control circuitry. In this paper, the previous structure is modified to address the aforementioned drawbacks and is... 

A single-stage structure is proposed for realizing a unity power factor three-phase isolated AC-DC converter for telecommunication power supply modules. This structure is composed by integrating a boost converter to the isolated threephase three-switch buck rectifier. Modified space vector modulation method is applied to the three-phase three-switch isolated unity power factor input buck rectifier based on the space vector modulation for non-isolated buck. The output boost switch operates during heavily unbalanced mains conditions. Input currents are sinusoidal and in phase with the input voltages even for heavily unbalanced input voltages, e.g. loss of one phase. The converter is modeled by... 

This paper presents a decentralized control strategy for the autonomous (islanded) operation of parallel connection of two distributed generation (DG) units. The DG units are electronically interfaced to the host grid at the same point of common coupling (PCC), where the local load is also supplied. In the grid-connected mode, the voltage-sourced converter (VSC) of each DG unit controls the exchange of real and reactive power components with the host grid, based on the conventional dq-current control strategy. In the islanded mode, one of the DG units provides voltage and frequency control for the island, and the other DG unit continues to operate with the pre-islanding dq-current control... 

In this paper, an optimal down sampler is used for Associate Discrete Circuit (ADC) based modeling and simulation of basic switching converters. Characteristic equation of backward Euler based discrete model of the circuit is used to find the value for down sampling. Using ADC modeling, fixed admittance matrix can be achieved for modeling switching converters and using down sampler, additional switch and diode current oscillations are minimized. Real-time digital simulation of buck converter using ADC with down sampler method is implemented on a Field Programmable Gate Array (FPGA) and the results are those expected without additional numerical oscillations. Based on the place-and-route... 

Load flow problems have always been an important issue in power system analysis and require proper modeling of system components. In this regard Flexible AC Transmission System (FACTS) controllers are modern devices that their modeling specially the series type is a challenging topic. This paper describes a three-phase model for Distributed Static Series Compensator (DSSC) based on extending the Static Synchronous Series Compensator (SSSC) model in Newton power flow. To extend the SSSC model the following two differences must be considered; three completely independent phases and the existence of several modules in a DSSC system. Simulation results on the IEEE 30-bus system and a five bus... 

This paper proposes a novel FPGA-based matrix-inversion technique that is specifically tailored and optimized for real-time electromagnetic transients simulation of power electronic converters with high switching frequency. This is the first reported solution that is capable of solving the real-time equations related to using ideal switch model and the associated circuitry in very small time-steps (e.g., an average of 36 ns in a three-phase back-to-back converter case study), without requiring large amount of memory, being limited to small number of switches, adding parasitic elements, or depending on a priori knowledge of the circuit operation or switching strategy. The accuracy of the... 

PFC converters for higher power are commonly designed for continuous conduction mode (CCM). However, at light load, discontinuous conduction mode (DCM) will appear close to the crossover of the line voltage, causing the converter to switch between the two conduction modes. As a result, the converter dynamics change abruptly, producing input current distortion. In this article a piecewise affine approximation has been employed in modeling a boost power factor correction converter operated in the mixed conduction mode. This approach makes the new model very useful in large signal analysis of PFC rectifiers and design of controller. The results obtained from the proposed model are compared with... 

Distribution Power Electronic Transformers are introduced to improve the power quality issues as well as to reduce the size and the cost of the transformers once technological progress made it possible. In this paper first, some existing configurations are overviewed. Then a new circuit topology is introduced for input and output stages of a Power Electronic Transformer. This circuit comprises three-phase input matrix converter, three-phase four-wire output matrix converter and the high frequency transformer. Control scheme of input and output link is analyzed and simulation result of the system is presented. Reduced size, lower price, higher efficiency and better voltage regulation are some... 

LLC-LC resonant converter is a suitable circuit topology to design switched-mode power supplies for wide-output-voltage and wide-output-load applications. In this paper, a design procedure is introduced to optimize this converter. Unlike soft switching techniques for pulse width modulated converters, which usually apply an active auxiliary circuit to reduce switching losses and EMI, in the proposed converter, not only such circuits are not used, but also all of the parasitic elements are merged to the converters main components. Zero-voltage switching (ZVS) operation is realized for all power devices under all operating conditions. Thus, this converter is a suitable choice for...