Sharif Digital Repository

Portfolio theory has found its model in numerous engineering applications for optimizing the electrical generation mix of an electricity area. However, to have better performance of this theory, this paper presents a new heuristic method as known modified artificial bee colony (MABC) to portfolio optimization problem. Moreover, we consider both dis-patchable and non-dis-patchable constrains variables and energy sources. Note that the proposed MABC method uses a Chaotic Local Search (CLS) to enhance the self searching ability of the original ABC algorithm. Resulting, in this paper a portfolio theory-based MABC model that explicitly distinguishes between electricity generation (energy),... 

In optimum designing of wireless power transfer(WPT) coils, maximum efficiency and maximum power transfer capability of coils should be considered. In this paper, a novel technique for optimum design of WPT coils based on maximum efficiency with considering required power transfer capability has been given. Optimum selection of system parameters including coil and wire dimensions, number of turns of coils and compensation capacitor selection based on minimum weight of copper mass is also given. For evaluation purpose a 100W experimental sample is designed and tested in 20cm range  

Wind and solar power are known to be highly influenced by weather events and may ramp up or down abruptly. Such events in the power production influence not only the availability of energy, but also the stability of the entire power grid. By analysing significant amounts of data from several regions around the world with resolutions of seconds to minutes, we provide strong evidence that renewable wind and solar sources exhibit multiple types of variability and nonlinearity in the time scale of seconds and characterise their stochastic properties. In contrast to previous findings, we show that only the jumpy characteristic of renewable sources decreases when increasing the spatial size over... 

Proliferation of renewable energy resources in distribution networks has captured distribution companies' attention towards more active management tools. Thanks to the smart grid paradigm, hourly network reconfiguration, which is still among immature ideas, can bring the activeness required to handle fluctuating output of renewable resources. The aim of this study is to analyze the worthiness of the hourly reconfiguration in the presence of renewable energy resources. For doing so, a mathematical model is devised to minimize daily network losses via applying hourly reconfigurations. The model is a mixed integer second-order cone programming problem and is solved via MOSEK solver. The... 

Demand response is envisioned as a key solution to increase network efficiency as well as to alleviate challenges such as growing demand. In this paper, domestic electric water heater (EWH) and heating, ventilation, and air-conditioning (HVAC) are considered for potential demand response applications. An interaction between the system operator and consumers is considered to facilitate managing cyclic operation of consumers' heating loads. A centralized control model is first developed and formulated to achieve potential benefits of demand response of EWH and HVAC loads. Then, a distributed control algorithm is designed for practical implementation. In the proposed algorithm, house-wide... 

As a high proportion of the total generated electricity energy and the power system costs is due to the power losses in lines, allocating the loss and associated cost to the system loads and generating units is a substantial issue in deregulated power systems. The procedure to accomplish this cost allocation is designated as 'loss cost allocation' (LCA). So far, a number of LCA methods have been proposed for transmission networks. A few papers have compared different loss allocation methods, which are the methods which calculate the loss (and not necessarily the loss cost) allocated to the loads and generating units. However, this paper presents a comparative study of LCA methods. In this... 

In this paper, a new genetic algorithm (GA) method is presented to solve the optimization problem in coordination of overcurrent and earth fault relays. In addition to optimal coordination of overcurrent relays, earth fault relays are also coordinated by GA, considering critical fault condition for the relays located in two sides of network's transformers. The objective function is developed by adding new terms that are the constraints related to the coordination of overcurrent and earth fault relays in critical fault conditions considering different winding arrangements of transformers. The paper concluded by the results of a study carried out on a sample power network. The results... 

Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don't usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time prevents smart meters from... 

Nicanfar and Leung proposed a multilayer consensus elliptic curve based password authenticated key-exchange (MCEPAK) protocol for smart grid. They claimed that their protocol is secure against possible attacks. In this paper, we show that the MCEPAK protocol is vulnerable to the dictionary attack and an adversary can obtain the passwords of the appliances by eavesdropping the communicated messages in the protocol. Moreover, we state that the passwords can be discovered by curious operators of the building area networks and the neighbor area networks. Theses weaknesses motivated us to introduce a chaotic maps based authenticated key exchange protocol for smart grid. To the best of our... 

In this paper a reliability, emission, and network security constrained unit commitment (UC) with the focus on wind power integration is formulated. It is shown that clearing both energy and spinning reserve markets taking into account network constraints provides a reliable and economic solution for day-ahead operation planning of a power system with a significant amount of thermal and wind power in the generation portfolio. The developed UC is formulated and implemented in MATLAB. The IEEE 24-Bus Reliability Test System (RTS) is used to verify the UC method by simulation. © 2017 IEEE  

Underlay device-to-device (D2D) communication is an attractive technology enabling nearby cellular users to communicate with each other directly in order to increase data rate and spectral efficiency. The current cellular heterogeneous networks consist of macrocell base stations and small cell base stations with different transmit powers and coverage areas. Femtocell is the most popular small cell which is expected to be utilized in dense and ultra-dense scenarios in the future. Network coding in relay-assisted multi-hop communications improves achievable transmission rate and coverage of D2D communications. In this paper, two-hop random linear network coding network in cooperative D2D... 

With the development of modern power systems, Smart Grid as the intelligent generation of electricity networks, has been faced with a tremendous attention. The Smart Grid systems are made up of fine-grained power grid measurements to achieve a high stability and reliability. In these networks, the data security and privacy issues for secure data sharing among the components of the system have emerged as the basic requirement. Typically, a service provider securely shares the data/commands with the smart meters under an arbitrary policy which is determined by the service providers. As the smart grid components are considered to have constrained computational resources, we cannot directly use... 

System security indices play a crucial role with regard to monitoring system statues. These indices are derived from system measurements which are prone to either intentional or unintentional noises. To alleviate the effect of intentional noises, it is required to protect measurements data from bad data injection. In this regard, this paper intends to propose an approach to determine priority order of protected bus measurements in order to negate the effects of bad data injection on security indices. With this in mind, two security severity indices, the over loading risk index and the under voltage risk index, are considered. Genetic algorithm serves to find the highest deteriorating effect... 

Electric vehicles have been proposed as a proper replacement for fossil fuel-powered vehicles; however, due to the limited power density of electric vehicles batteries, these cars have been facing formidable challenges, such as limited traversed distance. In recent years, dynamic wireless chargers are introduced as an adequate way of addressing this problem in the hope that dealing with this issue can lead to an increase in the popularity of electric vehicles. In this paper, a design procedure for transmitter coil of a dynamic wireless electric vehicles charger is proposed. The procedure includes selecting the best possible shape and calculating optimum size of coils for proper operation of... 

Increasing redundant paths in transmission grids has always been thought to be a tool to enhance service reliability. However, network equations by intertwining power flows through redundant paths impose more limits on systems with more redundancy. Accordingly, autonomous removing of a few lines may relief capacity limit violations in some contingency events thereby enhancing service reliability. This paper aims to study impacts of manual removing of transmission lines on composite system reliability. For doing so, the existing model is extended to consider optimal transmission switching (OTS) as a remedial action. The model minimizes total damage cost imposed by load curtailments. The... 

Nonlinear transmission lines (NLTLs) are one of the most prominent solid-state sources of high-power RF pulses. However, there is no integrated mathematical basis, which predicts adequately the generated waveforms on an NLTL and those delivered to the load. This analysis is required for designing and optimizing these transmission lines. Most works in this area are related to experimental studies and results. In this paper, we have developed a theoretical basis, which predicts all the required characteristics of the generated RF pulses on a lossy NLTL. The RF amplitude, the maximum voltage, and the central frequency of the generated pulses at each node of an NLTL are formulated. All the... 

A new resonance phenomenon is demonstrated in waveguide cavities, which simultaneously uses two orthogonal modes (polarizations). This resonance is formed by bouncing waves with similar handedness, between two simple anisotropic metasurfaces having a relative rotation angle. The rotated anisotropic metasurfaces can cross couple the waves from one polarization to the other at the cavity end. The field profile of the resonant mode does not exhibit nodes and antinodes, thus the resonant frequency is not solely determined by the cavity length, unlike common resonators. The resonance condition is theoretically demonstrated from both field and transmission line perspectives, and is validated by... 

Underlay device-to-device (D2D) communication is an attractive technology enabling nearby cellular users to communicate with each other directly in order to increase data rate and spectral efficiency. The current cellular heterogeneous networks consist of macrocell base stations and small cell base stations with different transmit powers and coverage areas. Femtocell is the most popular small cell which is expected to be utilized in dense and ultra-dense scenarios in the future. Network coding in relay-assisted multi-hop communications improves achievable transmission rate and coverage of D2D communications. In this paper, two-hop random linear network coding network in cooperative D2D... 

Nowadays communication and monitoring systems play an important role in power systems security. However, these systems are exposed to bad data injection through attackers. This paper is aimed to propose a priority order list of attacked buses in order to be fully informed about the attacker decision. To do so, system security is evaluated through two well-known risk indices including under voltage risk index and overloading risk index. A genetic algorithm (GA) is employed to determine the most severe attack for each of the security indices. The effectiveness and accuracy of the proposed model are scrutinized through simulations on the IEEE 30-bus network. The paper reveals that knowing the... 

To more clearly show the abilities of multi-energy carrier systems in managing different energy demands, this paper investigates optimal scheduling of an energy hub in presence of price-based demand response (DR) programs. In this regard, the mathematical model of different energy converters and storage units including combined heat and power (CHP), electrical storage, heat storage and ice storage are extracted. Then, time-of-use (TOU) electrical energy price is set in such a way to reach lower demand in peak hours. Extracting the optimization model of energy scheduling for an energy hub in presence of TOU DR program, the proposed algorithm is implemented on a typical energy hub and the...