Sharif Digital Repository

In the present study, exergoeconomic optimization of a trigeneration system for cooling, heating and power purposes has been carried out. The system is made up of air compressor, combustion chamber, gas turbine, dual pressure heat recovery steam generator and absorption chiller in order to produce cooling, heating and power. The design parameters of this study are selected as: air compressor pressure ratio, gas turbine inlet temperature, pinch point temperatures in dual pressure heat recovery steam generator, pressure of steam that enters the generator of absorption chiller, process steam pressure and evaporator of the absorption chiller chilled water outlet temperature. The economic model... 

The deformation behavior of a 49.8 Ni-50.2 Ti (at pct) alloy was investigated using the hot compression test in the temperature range of 700 °C-1100 °C, and strain rate of 0.001 s-1 to 1 s-1. The hot tensile test of the alloy was also considered to assist explaining the related deformation mechanism within the same temperature range and the strain rate of 0.1 s-1. The processing map of the alloy was developed to evaluate the efficiency of hot deformation and to identify the instability regions of the flow. The peak efficiency of 24-28% was achieved at temperature range of 900 °C-1000 °C, and strain rates higher than 0.01 s -1 in the processing map. The hot ductility and the deformation... 

The hot workability of a wrought 49.8 Ni-50.2 Ti (at pct) alloy was assessed using the hot compression tests in temperature range of 700-1000°C, strain rate of 0.001-1s-1, and the total strain of 0.7. The constitutive equations of Arrhenius-type hyperbolic-sine function was used to describe the flow stress as a function of strain rate and temperature. The preferable regions for hot workability of the alloy were achieved at Z (Zener-Holloman parameter) values of about 109-1013 corresponding to the peak efficiency of 20-30% in the processing map. However, a narrow area in the processing map including the deformation temperature of 1000°C and strain rate of 1s-1 is inconsistent with the related... 

In this paper energy, exergy and thermoeconomic analysis of a combined cooling, heating and power (CCHP) system has been performed. Applying the first and second laws of thermodynamics and economic analysis, simultaneously, has made a powerful tool for the analysis of energy systems such as CCHP systems. The system integrates air compressor, combustion chamber, gas turbine, dual pressure heat recovery steam generator (HRSG) and absorption chiller to produce cooling, heating and power. In fact, the first and second laws of thermodynamics are combined with thermoeconomic approaches. Next, computational analysis is performed to investigate the effects of below items on the fuel consumption,... 

Uniaxial compression test at different temperatures [573 K to 723 K (300 °C to 450 °C)] and strain rates (0.01 to 1 s−1) was employed to study the hot deformation behavior of an ultrafine-grained (UFG) Al6063 alloy prepared by the powder metallurgy route. The UFG alloy with an average grain size of ~0.3 µm was prepared by mechanical milling of a gas-atomized aluminum alloy powder for 20 hours followed by hot powder extrusion at 723 K (450 °C). To elaborate the effect of grain size, the aluminum alloy powder was extruded without mechanical milling to attain a coarse-grained (CG) structure with an average grain size of about 2.2 µm. By employing the dynamic materials model, processing maps for... 

A gas-turbine cogeneration system with a regenerative air preheater and a single-pressure exhaust gas boiler serves as an example for application of CHP Plant. This CHP plant which can provide 30 MW of electric power and 14kg/s saturated steam at 20 bars. The plant is comprised of a gas turbine, air compressor, combustion chamber, and air pre-heater as well as a heat recovery steam generator (HRSG). The design Parameters of the plant, were chosen as: compressor pressure ratio (rc), compressor isentropic efficiency (ηac), gas turbine isentropic efficiency (ηgt), combustion chamber inlet temperature (T3), and turbine inlet temperature (T4). In order to optimally find the design parameters a... 

In this paper, the continuum damage mechanics model originally proposed by Lemaitre (Journal of Engineering Materials and Technology. 1985; 107: 83-89) is presented through an adaptive finite element method for three-dimensional ductile materials. The macro-crack initiation-propagation criterion is used based on the distribution of damage variable in the continuum damage model. The microcrack closure effect is incorporated to simulate the damage evolution more realistic. The Zienkiewicz-Zhu posteriori error estimator is employed in conjunction with a weighted Superconvergence Patch Recovery (SPR) technique at each patch to improve the accuracy of error estimation and data transfer process.... 

The influence of Cu addition on the hot deformation behavior of NiTi shape memory alloys was investigated using hot compression test. A series of alloys with different Cu contents of Ti50.4Ni49.6-xCux (x = 0, 3, 5, 7 at.%) were deformed under compression to a true strain of 0.7 at the temperature range of 700-1000 °C with 100 °C intervals and constant strain rate of 0.1 s-1. The stress-strain curves showed that the addition of Cu to NiTi alloy made the flow curves shift upward. This was confirmed by the calculated critical stress, σc, obtained from inflections in θ-σ plots, which is attributed to the formation of high strength Cu containing precipitates and solid solution hardening caused by... 

The quantification of carbon dioxide (CO2) dissolution in oil is crucial in predicting the potential and long-term behavior of CO2 in reservoir during secondary and tertiary oil recovery. Accurate predicting carbon dioxide molecular diffusion coefficient is a key parameter during carbon dioxide injection into oil reservoirs. In this study a new model based on adaptive neuro-fuzzy inference systems (ANFIS) is designed and developed for accurate prediction of carbon dioxide diffusivity in oils at elevated temperature and pressures. Particle Swarm Optimization (PSO) as population based stochastic search algorithms was applied to obtain the optimal ANFIS model parameters. Furthermore, a simple... 

Time redundancy (rollback-recovery) and hardware redundancy are commonly used in real-time systems to achieve fault tolerance. From an energy consumption point of view, time redundancy is generally more preferable than hardware redundancy. However, hard real-time systems often use hardware redundancy to meet high reliability requirements of safety-critical applications. In this paper we propose a hardware-redundancy technique with low energy-overhead for hard real-time systems. The proposed technique is based on standby-sparing, where the system is composed of a primary unit and a spare. Through analytical models, we have developed an online energy-management method which uses a slack... 

A sequential implicit numerical method based on discrete-fracture model and the Galerkin Finite Element method, for time-dependent coupled fluid flow and geomechanics problems in fractured subsurface formations is presented. Discrete-fracture model has been used to explicitly represent the fracture network inside porous media. The Galerkin Finite Element method with adaptive unstructured gridding is implemented to numerically solve the spatially three-dimensional and time-dependent problem. The presented method is validated with previously obtained solutions. Two problems are numerically solved by applying the presented methodology in a three-dimensional fractured petroleum reservoir under... 

In this work, the potential for the auto-ignition of Iranian heavy oil during in situ combustion (ISC) process conditions was studied. Kinetic studies were carried out using thermal analysis techniques. Effects of oxygen partial pressure, reservoir pressure, and clay on the auto-ignition condition were investigated. Based on the experimental results obtained, a kinetic equation was derived for each of the different oil samples in the presence of different sands. The effect of partial pressure of oxygen in the injected air showed that at atmospheric pressure, low temperature combustion (LTC) was initiated at 275°C. Also, enriching the injected air by oxygen lowers the initial LTC temperature... 

Purpose: The aim of this study was to compare diffusion tensor imaging (DTI) isotropic map (p-map) with current radiographically (T 2/T 2 -FLAIR) methods based on abnormal hyper-signal size and location of glioblastoma tumor using a semi-automatic approach. Materials and methods: Twenty-five patients with biopsy-proved diagnosis of glioblastoma participated in this study. T 2, T 2 -FLAIR images and diffusion tensor imaging (DTI) were acquired 1 week before radiotherapy. Hyper-signal regions on T 2, T 2 -FLAIR and DTI p-map were segmented by means of semi-automated segmentation. Manual segmentation was used as ground truth. Dice Scores (DS) were calculated for validation of semiautomatic... 

We investigate the underlying physics of degradation/recovery of a metal/n-CdTe Schottcky junction under reverse or forward bias stressing conditions. We used Sah-Noyce-Shockley (SNS) theory to investigate if the swept of Fermi level pinning at different levels (under forward/reverse bias) is the origin of change in current-voltage characteristics of the device. This theory is based on Shockley-Read-Hall recombination within the depletion width and takes into account the interface defect levels. Fermi Level Pinning theory was primarily introduced by Ponpon and developed to thin film solar cells by Dharmadasa's group in Sheffield University-UK. The theory suggests that Fermi level pinning at... 

Catechins from fresh green tea leaves as potential sources of anticancer and antioxidant components were target materials in this work. Superheated water extraction, which is a kind of leaching operation, and solvent partition with chloroform and ethyl acetate were utilized to recover Catechins from tea leaves. Then, a mathematical model was developed to simulate the superheated water extraction of Catechins. The unsteady state mass balance of the solute in solid and superheated water phases led to two partial differential equations. The model was solved numerically using a linear equilibrium relationship. The model parameters were predicted applying existing experimental correlations. An... 

In this paper, an adaptive finite element analysis is presented for 3D modeling of non-planar curved crack growth. The fracture mechanical evaluation is performed based on a general technique for non-planar curved cracks. The Schollmann's crack kinking criterion is used for the process of crack propagation in 3D problems. The Zienkiewicz-Zhu error estimator is employed in conjunction with a weighted SPR technique at each patch to improve the accuracy of error estimation. Applying the proposed technique to 3D non-planar curved crack growth problems shows significant improvements particularly at the boundaries and near crack tip regions. Several numerical examples are presented to illustrate... 

Hydrolysis kinetics of the lead silicate glass (LSG) with 40 mol% PbO in 0.5 N HNO3 aqueous acid solution was investigated. The surface morphology and the gel layer thickness were studied by scanning electron microscopy (SEM) micrographs. Energy dispersive X-ray spectroscopy (EDS) and inductively coupled plasma spectroscopy (ICP) were used to determine the composition of the gel layer and the aqueous solution, respectively. The silicon content of the dissolution products was determined by using weight-loss data and compositions of the gel layer and the solution. The kinetic parameters were determined using the shrinking-core-model (SCM) for rate controlling step. The activation energy... 

Background: Return to sport (RTS) criteria are widely being used to identify anterior cruciate ligament reconstructed (ACLR) athletes ready to return to sportive activity and reduce risk of ACL re-injury. However, studies show a high rate of ACL re-injury in athletes who passed RTS criteria. This indicates that the current RTS criteria might not be sufficient to determine return to sport time in ACLR athletes. Previous studies have reported a close association between altered lower limb kinematics and ACL re-injury. However, it is not clear how lower extremity kinematics differs between ACLR athletes who passed the RTS-criteria and who failed. This study compared lower extremity kinematics... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

The main purpose of this study is to evaluate the effect of intravenous irradiation of different low-level laser wavelengths on the activity of lecithin-cholesterol acyltransferase (LCAT), paraoxonase (PON1), catalase, and ferric reducing ability of plasma (FRAP) in diabetic rats. First, diabetes was induced in rats using streptozotocin (STZ). Enzymes’ activity was measured in the blood samples and compared before and after intravenous laser blood irradiation. We used four continuous-wave lasers—IR (λ = 808 nm), Red (λ = 638 nm), Green (λ = 532 nm), and Blue (λ = 450 nm)—to compare the wavelength’s effect on different enzymes’ activity. Laser power was fixed at 0.01 mW and laser energy was...