Sharif Digital Repository

A new shear strengthening method involving post-tensioning of the critical shear region of reinforced concrete beams is investigated. Thirty-one experiments were carried out using 24 specimens. Theoretical load-deflection relations are obtained from moment-curvature analysis using fiber cross sections and taking into consideration the effects of different concrete confinements along the beam length. A theoretical shear strength model that includes three shear resisting components in the critical shear region of the strengthened beams is provided. Experimental results from beams with and without shear strengthening are compared with calculated load-deflection relations and predicted shear... 

Reinforced concrete columns with insufficient transverse steel reinforcement are not capable to dissipate seismic energy due to lack of necessary ductility. In this research, six RC columns with poor transverse reinforcements are tested under cyclic and axial loads as control columns and retrofitted ones. Prestressed and non-pre-stressed CFRP strips used as external transverse reinforcement to evaluate the benefits of active and passive confinement. Results indicate that additional confinement due to the use of CFRP strips enhances the strength, ductility and energy dissipation capacity of columns. The advantages of active confinement versus passive confinement are demonstrated too. © 2006... 

In this study, the influence of crack conduction method on behavior of reinforced concrete (RC) frame under iterative high impact loading were experimented. To investigate the structural behavior through large deformations and progressive damage and to identify the failure modes, the falling weight and falling height were set more than the structural strength in elastic state. A comprehensive scheme which indicated influence of location of initial cracks on behavior and failure mode of structure was developed. Falling weight impact test was conducted on twenty-one laboratory scaled RC frames which were categorized in four series regard to considered scheme. Concrete volume and compressive... 

Numerous buildings have been damaged or destroyed in previous earthquakes by developing soft storey. Almost all the seismic codes have provisions to prevent soft storey in structures, most of them have recommended the ratio of stiffness between adjacent storeys, but none of them has proposed the method to calculate the storey stiffness. On the other hand a great number of previous researches on stiffness have been focused on approximate methods and accurate methods by using analytical softwares have been almost neglected. In this study, six accurate methods for calculating the storey stiffness have been studied on 246 two-bay reinforced concrete frames. It is shown with the results of the... 

In this paper, the seismic behavior of dual structural systems in forms of steel moment-resisting frames accompanied with reinforced concrete shear walls and steel moment-resisting frames accompanied with concentrically braced frames, have been studied. The nonlinear behavior of the mentioned structural systems has been evaluated as, in earthquakes, structures usually enter into an inelastic behavior stage and, hence, the applied energy to the structures will be dissipated. As a result, some parameters such as ductility factor of structure (μ), over-strength factor (Rs) and response modification factor (R) for the mentioned structures have been under assessment. To achieve these objectives,... 

We investigate the resistance of reinforced concrete panels (RCPs) due to explosive loading using nonlinear finite element analysis and surrogate models. Therefore, gene expression programming model (GEP), multiple linear regression (MLR), multiple Ln equation regression (MLnER), and their combination are used to predict the maximum deflection of RCPs. The maximum positive and negative errors, mean of absolute percentage error (MAPE), and statistical parameters such as the coefficient of determination, root mean square error (RMSE). Normalized square error (NMSE), and fractional bias are utilized to evaluate and compare the performance of the models. We also present a novel statistical table... 

Corrosion of steel rebars in concrete can reduce the durability of concrete structures in coastal environments. The corrosion rate of these concrete structures can be reduced by using suitable concrete additives and coating on rebars. This paper investigates the corrosion resistance of steel rebars by the addition of pozzolanic materials including fly ash, silica fume, polypropylene fibers, and industrial 2-dimethylaminoethanol (FerroGard 901) inhibitors to the concrete mixture. Three different types of rebars including mild steel rebar st37, and two stainless steel reinforcements, AISI 304 and AISI 316, were used. Various types of primer and coating including alkyd based primer, hot-dip... 

A significant amount of research on self-consolidating concrete (SCC) technology has been devoted to evaluating the suitability of the material for its use in structural applications. However, more research is required to confirm the adequacy of SCC structural members for resisting gravity and seismic loads. This study focuses on the experimental investigation of the seismic performance of interior reinforced concrete beam-column connections with SCC. Four beam-column connection specimens, three with SCC and one with normally vibrated concrete (NC), were designed for this experimental study. Factors such as concrete type (SCC or NC) and axial load ratio (0, 7.5 and 15 % of column section... 

Unreinforced masonry (URM) buildings are rather popular around the globe due to low construction costs, even though they can be prone to substantial damage caused by even moderate earthquakes. Numerous URM buildings that have experienced damages from past earthquakes require to be upgraded or at least return to their undamaged state in order to be able to withstand future earthquakes. In many cases, reconstruction is not the best choice because of financial and time restrictions. As such, repair/retrofit is the best choice, assuring the post-earthquake serviceability. Furthermore, seismic repair/retrofit can be a cost-efficient method to avoid reconstruction complexities and expenses. In... 

Damage detection of a full-scale nine-story reinforced concrete building is investigated using forced vibration test (FVT). The building was the former Civil and Architecture Department of Tohoku University located in Sendai Japan. Earthquake resistance elements of this building were severely damaged in 1978 Miyagi-Ken Oki earthquake and the building was retrofitted on 2001. FVT was performed on the structure before and after retrofitting with same sensor arrangement. Using data acquired from sensors, system identification was performed using rational fraction polynomial and the damage assessment (detection and location) was done by modal assurance criterion and its derivatives. The results... 

This paper proposes a damage assessment framework based on the visual features of a damaged reinforced concrete shear wall, such as crack pattern distribution, crushing areal density, aspect ratio, and the presence of the boundary condition. The study contains two parts including: identifying the performance level of the damaged walls (i.e., Immediate Occupancy, Life Safety, and Collapse Prevention) and estimating the residual strength and drift ratio of the walls. The research database contains 236 images of 72 reinforced concrete shear walls tested in the laboratory under the quasi-static cyclic loadings at various drift ratios between 0 and 4%. To identify the performance level of a... 

Different values have been assigned to the ratio of the deflection amplification factor (Cd) to the response modification factor (R) for a specified force-resisting system in the seismic design provisions while the same application is defined for it. An analytical study of the seismic responses of several reinforced concrete frames subjected to a suite of earthquake records performed in this research indicate that the stories’ overstrength and stiffness distribution along the structural height can affect local deflections more than global ones. Therefore, the Cd/R ratio is calculated based on the ratio of both maximum inelastic to maximum elastic displacements and... 

This study introduces a simple and efficient method to determine the peak floor acceleration (PFA) at different performance levels for three types of plane reinforced concrete (RC) structures: moment-resisting frames (MRFs), infilled–moment-resisting frames (I-MRFs), and wall-frame dual systems (WFDSs). By associating the structural maximum PFA response with the deformation response, the acceleration-sensitive nonstructural components, and the building contents, can be designed to adhere to the performance-based seismic design of the supporting structure. Thus, the proposed method can accompany displacement-based seismic design methods to design acceleration-sensitive nonstructural elements... 

In this research, 19 specimens of ultra-high performance fiber-reinforced concrete rectangular beams were made and their shear resistance was determined experimentally. The results were compared with estimations by ACI 318, RILEM TC 162-TDF, Australian guideline, and Iranian national building regulations. To compare the code estimations, the ratio of experimental shear strength to predicted shear strength was calculated for each code. This ratio is in fact a measure of safety factor on the one hand and a measure of precision of the estimation on the other hand. Based on the results of both studies, the authors concluded that the Australian guideline, with the amount of 2.5, provided the... 

In this research, 19 specimens of ultra-high performance fiber-reinforced concrete rectangular beams were made and their shear resistance was determined experimentally. The results were compared with estimations by ACI 318, RILEM TC 162-TDF, Australian guideline, and Iranian national building regulations. To compare the code estimations, the ratio of experimental shear strength to predicted shear strength was calculated for each code. This ratio is in fact a measure of safety factor on the one hand and a measure of precision of the estimation on the other hand. Based on the results of both studies, the authors concluded that the Australian guideline, with the amount of 2.5, provided the... 

This study aims to develop the Consistent Fish-Bone (CFB) simplified model for efficient estimation of Engineering Demand Parameters (EDPs) in irregular steel Moment Resisting Frames (steel-MRFs). To achieve this goal, some modifications based on the energy consistent approach have been applied to the Improved Fish-Bone (IFB) simplified model previously presented for reinforced concrete MRFs. These modifications include: 1) adding truss elements to the IFB model to consider the effect of flexural deformations and determining their areas by balancing the overturning moment and the strain energy due to the axial deformation of columns in the original steel-MRF with the overturning moment and... 

The aim of this study is to develop a new simulation procedure of endurance time excitations in which hysteretic energy compatibility is included. Existing methods for simulating excitations consider only amplitude and frequency content of motions and disregard parameters related to cumulative damage of structures. Hysteretic energy consistency, as a cumulative damage-related parameter, is included in the process. The proposed method is applied to generate new excitations. Efficiency of the proposed method is examined in two ways: (1) comparing damage spectra of simulated excitations with recorded ground motions; (2) applying simulated excitations in seismic assessment of three concrete... 

Recently, to improve the dynamic behavior of Reinforced Concrete (RC) slabs under impact load, the methods of externally bonding Glass Fiber Reinforced Polymer (GFRP) sheets to slab and internally reinforcing concrete by steel fibers have been proposed. Nevertheless, it is required to investigate the comparison between these two methods on response of RC slabs under impact loads. In this study, the influence of volume fraction of steel fibers, the number of GFRP sheet layers (one or two) and the arrangement of GFRP sheets (covering the whole or parts of surface), are examined. Performance of fourteen 1000 × 1000 × 75 mm concrete slabs including one plain slab, one steel RC slab, three steel... 

Reinforced concrete slabs are common structural elements that could be exposed to impact loading. Although use of reinforced concrete slabs and utilization of Fiber Reinforced Polymer (FRP) as alternative to traditional steel reinforcement slabs are growing, but the influence of various parameters on their response under impact loads is not properly evaluated. This study investigated the effect of rebar's material, amount and arrangement of reinforcements, concrete strength and slab thickness on dynamic behavior of reinforced concrete slabs using both laboratory experiments and numerical simulations. Performance of fifteen 1000 × 1000 mm concrete slabs, including two 75 mm thick plain slabs,... 

This research studies the effect of glass fiber-reinforced polymer (GFRP) bars as compressive reinforcement in reinforced concrete (RC) beam members. Three singly and six doubly reinforced GFRP-RC beams were tested under a four-point loading configuration. The effect of compressive reinforcement on the load-bearing capacity, ductility, stiffness, and failure mode is determined. Also, the compressive performance of GFRP bars is evaluated by testing GFRP-RC cylinders. According to the results, GFRP bars in compression had a limited contribution to enhancing flexural strength, and the maximum increment in the flexural capacity of doubly reinforced beams compared to singly reinforced specimens...